• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.388.1-388
• /
• 2002

The sound absorption coefficients for multiple layer perforated plate systems containing several companments with airspaces and porous absorbing materials are estimated using the transfer matrix method developed in the previous paper. The absorption coefficients from transfer matrix method agree well with the values measured by the two-microphone impedance tube method fur various combinations of perforated Plates, airspaces or porous materials. (omitted)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1006-1007
• /
• 2015

Recent improvement in semiconductor technology make efficient switching possible at higher frequencies, which benefits the application of wireless inductive energy transfer. However, a higher frequency does not alter the magnetic coupling between energy transmitter and receiver. Due to the still weak magnetic coupling between transmitting and receiving sides that are separated by a substantial air gap, energy circulates in the primary transmitting side without being transferred to the secondary receiving side. This paper proposes an analysis on the system efficiency to determine the optimal impedance requirement for coils, rectifier and DC-DC Converter. A novel Boost DC-DC Converter is designed to provide the optimal impedance matching in WPT(Wireless Power Transfer) system for various loads.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.877-882
• /
• 2002

A new estimation model of predicting the sound absorption performance for multiple perforated plate sound absorbing system was developed using transfer matrix method. The proposed method was validated by comparing the calculated absorption coefficients of a single layer perforated plate with the values measured by the two-microphone impedance tube method far various porosity and cavity depth. The developed transfer matrix method was further applied to estimate the multiple layer perforated plates and it is shown that the estimated absorption coefficients generally agree well with the measured values.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.935-946
• /
• 2014

This paper investigates the noise transmission performance of industrial mufflers widely used in ships based on the CAE modeling and simulation. Since the industrial mufflers have very complicated internal structures, the conventional Transfer Matrix Method (TMM) is of limited use. The CAE modeling and simulation is therefore required to incorporate commercial softwares: CATIA for geometry modeling, MSC/PATRAN for FE meshing and LMS/SYSNOISE for analysis. Main sources of difficulties in this study are led by complicated arrangement of reactive elements, perforated walls and absorption materials. The reactive elements and absorbent materials are modeled by applying boundary conditions given by impedance. The perforated walls are modeled by applying the transfer impedance on the duplicated node mesh. The CAE approach presented in this paper is verified by comparing with the theoretical solution of a concentric-tube resonator and is applied for industrial mufflers.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.250-255
• /
• 2018

This paper presents a method for minimizing standby power consumption in wireless power transfer (WPT) system via magnetic resonance coupling (MRC) that operates at 6.78 MHz. The proposed circuit controls the required capacitance according to operational condition in order to reduce standby power consumption. Based on an impedance characteristic of the class-E power amplifier, operational principles of the proposed circuit are analyzed. Moreover, to verify the effectiveness of the proposed class-E power amplifier, an 8 W prototype for WPT system is implemented. The measured input power of the proposed class-E power amplifier at standby condition is reduced from 5.81 W to 3.53 W.

• 한국전자파학회논문지
• /
• 제28권12호
• /
• pp.933-940
• /
• 2017

본 논문에서는 부성 임피던스 변환기(Negative Impedance Converter: NIC)를 적용한 무선전력전송 시스템을 제안하였다. 차폐물질의 영향을 고려하여 전송 시스템을 구성하였다. 전송효율 개선을 위하여 부성 임피던스 변환기에서 발생한 부성저항을 적용하여 송신단의 Q 인자가 향상했다. NIC는 연산증폭기와 저항 소자로 구현하였으며, 특정 저항에 따른 부성저항 특성을 얻었다. 송신 코일의 크기는 $250mm{\times}250mm{\times}0.8mm$이며, 임피던스와 Q 인자는 각각 $31+j1874{\Omega}$, 60이다. 부성저항이 약 $30{\Omega}$일 때, 송신단의 저항이 감소하여 Q 인자는 약 900으로 증가했으며, 이는 기존 대비 약 15배 향상된 결과이다. 제안하는 시스템에 대하여 전송 효율을 측정하였으며, 기존 시스템과 비교하여 효율이 크게 향상되었다. 따라서 NIC의 효과로 전송 효율이 개선될 수 있는 것을 검증하였다.

• 한국정보통신학회논문지
• /
• 제23권2호
• /
• pp.165-172
• /
• 2019

두 개 이상의 동축선을 사용하여 한 쪽은 동축선을 직렬로 연결하고, 반대 쪽은 동축선을 병렬로 연결하면 광대역에서 동작하는 임피던스 변환회로가 된다. 동축선을 이용한 광대역 임피던스 변환회로는 동축선의 외곽 도체를 임피던스 변환에 이용하기 때문에 수식 또는 시뮬레이션 프로그램을 통한 예측이 매우 어렵다. 본 논문에서는 ${\lambda}/4$-마이크로스트립 선로 임피던스 변환회로의 선로 신호 감쇄에 대한 전달 특성(S21) 해석을 바탕으로 $25{\Omega}$ 동축선 두 개를 이용한 광대역 4:1($50{\Omega}:12.5{\Omega}$) 전송선로 임피던스 변환회로를 제작하여 동작 특성을 살펴보았다. 두 개의 동축선을 이용한 광대역 임피던스 변환기는 동축선의 길이를 90도(${\lambda}/4$)로 인식하는 주파수에서 신호 전달 특성(S21)이 급격히 감소하는 노치 특성이 발생하였다. 또한, 동축선 길이의 $0.06{\sim}0.2{\lambda}$에 해당하는 주파수 범위에서 신호 전달특성(S21) -0.2dB 이내의 값을 가졌다. 이러한 신호 전달특성(S21)은 출력 단에 연결된 마이크로스트립 선로의 길이 변화를 통해 약간의 동작 주파수 범위 변화와 원하는 주파수에서 최적의 신호 전달특성(S21)을 설정할 수 있음을 확인하였다.

• 전기화학회지
• /
• 제8권2호
• /
• pp.106-114
• /
• 2005

This article covers the theoretical ac-impedance models for the analysis of oxygen reduction on the porous cathode electrode f3r solid oxide fuel cell (SOFC). Firstly, ac-impedance models were explained on the basis of the mechanism of oxygen reduction, which were classified into the rate-determining steps; (i) adsorption of oxygen atom on the electrode surface, (ii) diffusion of adsorbed oxygen atom along the electrode surface towards the three-phase (electrode/electrolyte/gas) boundaries, (iii) surface diffusion of adsorbed oxygen atom m ixed with the adsorption reaction of oxygen atom on the electrode surface and (iv) diffusion of oxygen vacancy through the electrode coupled with the charge transfer reaction at the electrode/gas interface. In each section for ac-impedance model, the representative impedance plots and the interpretation of important parameters attributed to the oxygen reduction reaction were explained. Finally, we discussed in detail the applications of the proposed theoretical ac-impedance models to the real electrode of SOFC system.

• 대한전기학회논문지
• /
• 제35권12호
• /
• pp.560-566
• /
• 1986

In the design of an RF discharge system, the electrical equivalence of the gas discharge must be known. With this knowledge, one can design a suitable matching network for a maximum power transfer from the RF generator into the discharge. For this purpose, an experiment has been conducted in which the electrical impedance (conductance and capacitance) was determined as a function of power. In parallel with this, a detailed theoretical analysis has been done and the results are in accord with those of our experiment. Design equations are also given for a simple matching network, and a design example is presented to demonstrate its application. During the actual operation of an RF discharge system, however, it has been often observed that the reflected power tends to vary in small values due to the changes in the impedance of the system. This problem can be relieved by adding an automatic impedance matching circuit to the system and this paper presents such an automatic impedance matching network.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.969-974
• /
• 2007

In this paper, a beamforming technique is introduced to measure the acoustic impedance at both normal and oblique incidence in a free field. The acoustic impedance is obtained by separating incident and reflected signals using the adaptive nulling method which is one of the various beamforming algorithms. To obtain better results, pressure vector commonly used in array signal processing is replaced with the transfer function vector between each microphone and the white Gaussian noise is suppressed by a wavelet shrinkage technique. The experiments conducted in a semi-anechoic room show that the proposed method is efficient and accurate in measuring the acoustic impedance of sound absorbing materials under a free field condition.