• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1724-1728
• /
• 2008

Track circuit is transmitted throughout the rails. In order to insure safe and reliable operation of track circuits, the track and the environment should respect mandatory electrical characteristics. In addition, for cab signalling through track Circuit as per TVM 430, these electrical characteristics should insure the transmission to the train. Track circuits have several operation and safety functions. They can detect the train position and broken rails. When track circuits are used as track to train transmission, they also have to be powered enough to be captured by the train sensors.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.299-300
• /
• 2007

In this paper, slip wear phenomenon of train was studied by traction force of acceleration and braking force of deceleration. First, the slip wear phenomenon on train operation mode was analyzed when powering, coasting and braking each and then rail wear was analyzed from the slip wear data. Especially, the data proved correlation between slip wear and deceleration rather than acceleration. Second, If velocity of a train is constant, even though the velocity is high, ATO logging data and measurement data proved that the rail wear is not serious. It will help for efficient braking force operation providing fundamental data to braking step control.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.70-75
• /
• 2014

A track circuit is a critical piece of equipment that allows the existence of the trains on the track to be detected. Train detection is very important for the signal safety equipment. It allows for the confirmation of a train's location, the locking of switch points, the coordination of safe distance between trains, and the advance notice of a train's arrival. Track circuits can be powered by AC or DC. The DC track circuits are usually used on non-electrified tracks. On these tracks, many signal errors can be caused by lightning or problems with the power source. These problems can also cause damages to the rectifiers which must be repaired or replaced, promptly. This issue is especially problematic in the summer because of the higher frequency of thunderstorms. Issues with track circuits also cause problems for other equipment, such as railroad crossings and switch points. This further disrupts the safe operation of trains. This study aims to enhance maintenance efficiency and improve safety by utilizing parallel operation and multiplexing of a DC track circuit as well as installing an external surge protector. The experimental results on the operation of the proposed method is also presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.702-708
• /
• 2016

The railway signaling system has evolved to maximize its safety and maintainability based on the experiences in the construction and operation of railway systems. The newly developed systems was established to cope with the changes in an operating environment. In the process of a transition to the new system, both the existing ATS (Automatic Train Stop) and new ATP/ATO (Automatic Train Protection/Automatic Train Operation) systems are operating simultaneously in parallel. In this situation, modifications of the conditions of the interlocking diagram and logic are necessarily required on the existing ATS systems due to the frequent improvements in signaling equipment. This paper reports the enhancement of safety and operational efficiency of the system through an improvement of the security and the interlocking conditions of the existing ATS systems. The independent display of signals for each track was ensured to avoid giving the effect of On/Off signals for the selected track on the opposite side, and the security was improved by adjusting the position and interlocking conditions. In addition, the increased traffic density of railway systems was achieved by removing the unnecessary conditions and detailed signal display, which resulted in enhanced operational efficiency.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.361-366
• /
• 2001

The present study describes a practical estimation procedure about the pantograph under several severe aerodynamic load conditions. As the operating speed of the Korean Train Express(KTX) reaches 350km/h, structural safety at various conditions should be examined at the design stage. In the present study, a compact and reliable procedure is developed to get aerodynamic loads on each part of the pantograph regarding the typhoon condition, the train/tunnel interaction, the train/train interaction and the side wind condition. In the estimation procedure, 3-dimensional steady and unsteady CFD simulation around the high speed train facilitates assigning the external local flow condition around the pantograph. The procedure is verified using the results of the low speed wind tunnel test at JARI and applied to 7 flow conditions and 4 operation configurations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.61-67
• /
• 2018

Automatic Train Stop (ATS) is a device that automatically stops or decelerates a train when the train exceeds the permitted speed limits or violates the signal regulations. The railway signaling system has been evolved to an automatic train control system (ATC), and is being developed into Distance-to-Go and Communication Based on Train Control (CBTC). In spite of that, the ATS system is currently being operated in Seoul Metro (line 1 and 2) and most of railway lines in Korea as well as overseas. In this study, we presents the technical methodology to prevent human errors in order to secure the safety in operation of the ATS system.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.138-141
• /
• 2008

The screen doors installed in the station of subway are subject to the train-wind pressure caused by the operation of trains. The train-wind pressure has to be correctly estimated for the design of safe structure of screen doors. As three-dimensional numerical flow analysis technology has been significantly developed, the analysis on the train-wind pressure with diverse variables such as train specifications, train speed, tunnel and station configurations, and blockage ratio can be effectively carried out with three-dimensional numerical method. In this study, computational analysis of train-induced wind in a subway tunnel employing the screen doors are carried out by using the three-dimensional numerical method with the model of the moving boundary for the run of trains. While the numerical analysis of train-wind pressure was applied on the one island-type station in the Seoul Subway Line 2, maximum pressure of 494 Pa was estimated on the screen door when two trains pass each other at the speed of 80km/h in the platform.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.811-816
• /
• 2008

Train dynamics affects significantly safe and efficient operation of a train, especially during traction or braking period. Train dynamics is intrinsically complex due to many DOF motions in a three-dimensional space, and its behavior during the braking stage is too complex to understand and design an effective braking logic of the train. In this paper, we present a two-dimensional model with three DOF motion in a longitudinal, vertical, and pitch direction for the Hanvit 200 tilting train, which is efficient to analyze a braking performance. Furthermore, we analyze the braking logic and simulate the braking process of the Hanvit 200 tilting train using Simulink.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1297-1302
• /
• 2004

CBTC(Communication Based Train Control) System has many superior train control performances than conventional track-circuit-based train control system with higher train operation efficiency, and less installation and maintenance cost. It is expected that CBTC will replace the conventional train control systems in near future. As CBTC has different mechanisms from conventional track-circuit-based train control systems in identifying train positions, and communicating information between train and ground facility, we have to pay a earful attention to making the interface between CBTC equipments and other signalling devices. This paper provides the construction of the interface between CBTC equipment and other signalling equipments such as TTC(Total traffic Control) system. ATO. electronic interlocking devices.