• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.412-414
• /
• 2003

Communication based train control system is applied regularly worldwide. And this system may be used in domestic soon. Communication based train control system does not depend on conventional track circuit. Therefore, position and distance control of train to prevent collision with leading train may become important safety factor. This paper developed collision avoidance algorithm to control trains of several units efficiently for this. In developing a collision avoidance algorithm, it is desirable to avoid the need for additional system. Additional system restricts the development of the algorithm by limiting the effectiveness of the algorithm to only those areas where the additional system can be afforded and has been installed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.47.4-47
• /
• 2001

The automatic-driverless operation, a very important technique for metro railways, is necessary for achieving higher safety, greater reliability, and bigger transport capacity. To achieve these things, we have to build up the system design and tasting techniques for the railway system operation. These techniques are related to the onboard train control and communication systems which include TCMS(Train Control and Monitoring System), ATO(automatic train Operation), ATC(Automatic train Control), and TWC(Train to wayside communication). These sub-systems should interface not only with each other but also between the sub-systems and the signal system on the ground. For the saving of energy, we designed coasting strategy of ATO system, In this paper, we developed ATO system and tested on the test line and ...

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.210-218
• /
• 1998

The ATO(Automatic Train Operation) System is used for train operation instead of drivers. It is interfaced with TCMS(Train Control and Monitoring System) and ATC/TWC system in the train and wayside facilities. In this paper describes configuration of ATO, specification of ATO hardware, construction of ATO software and the algorithm fur automatic train speed regulation in the carborn ATO system. ATO Application Software is consist of ART, SPR, REG, SRV and PSM tasks. ART task is main control part of the ATO that determine ATO control, ATO mode, state transition. SPR determine speed reference according to train motion status, track data, train data and restricted train speed. REG task regulated train speed form the starting of one station to the precision stop at the other station under the result of ART and SPR tasks. In this paper, a algorithm for the train speed regulation while running is described.

• 한국산학기술학회논문지
• /
• 제10권5호
• /
• pp.935-941
• /
• 2009

본 논문에서는 철도의 운영효율을 향상시킬 수 있는 무선통신에 기반을 둔 열차제어기술에 대해 연구하였다. 현재 국내에서 사용되고 있는 신호시스템은 궤도회로 기반의 열차제어시스템으로서 열차의 이동성과 안정성을 고려하여 사용한 기술이다. 최근의 세계적 추세는 열차간격을 고밀도로 제어하기 위해 새로운 패러다임으로 떠오르고 있는 무선통신기반 열차제어시스템이다. 국내에서도 이에 대한 기술 확보가 요구되며, 이에 따른 무선통신기반 열차제어시스템의 연구개발을 추진하였다. 본 논문에서는 열차제어시스템의 구성 중 핵심적인 요소인 차상제어장치를 개발하였고, 이를 수도권 광역전철중의 하나인 분당선의 전동차에 설치하여 시험한 결과를 설명하고 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1182-1188
• /
• 2011

By storing various train information in running high speed train, we can analyze the cause of train accident efficiently. we have developed the smart and high available control method to control and manage the hardware modules. The hardware modules for event recorder consist CPU, Digital Input and Output, Pulse Input, Communication, Control Panel and Crash Protected Memory. The real time operation system is used to totally control and manage the various hardware modules. The main function of control method is collection of train information, calculation of train speed, interface with other on-board control system, storing and retrieving train information, and communication with Control Panel. In Control Panel, it displays the current train speed and the status of event recorder effectively. Also user interface is provided in Control Panel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.481-483
• /
• 2005

There is change of signal control system for train control worldwide current. This is train control system that use radio communication and step practical use Tuesday. Research for diversified application, examination and enforcement is achieved in internal railroad industry by this. Therefore, do examination of universal train radio control way for internal application. Studied train control way that use suitable radio communication to internal railroad.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.941-946
• /
• 2006

It followed in system development and SMRT(Seoul Metropolitan Rapid Transit Co)System reached to an automatic train operation(ATO) and driverless operation(DLM) from the manual operation due to the train driver. The train like the general bus or the car vehicle was not serial riding in a car and the Parallel concept which the numerous passenger rides in a car simultaneously occur frequently the charge of the train driver unmanned bitterly from existing manual handling was a possibility of doing, train open door control(ODM) which bites also ATO, it handles it minimized. Like this ATO/DLM, the control system which bites being a Wayside to Train communication for immediacy, it is a system of the Vital concept the immediacy of the citizen Data evil the radio information transmission and the train of the interface which is accurate from unmanned operation and, will decipher, will accomplish it will guarantee. It respects the passenger accident prevention and an air question environment improvement from subway platform and phul leys the screen door of Platform(PSD) with the fire tube frost it refers and part it treats and to sleep it does, ODM which bites is accuracy and immediacy of altitude and when seeing from the viewpoint which demands the trust of altitude, ODM system the trust of car incest interface in the equipment construction which is safe and the comparative analysis back of the system analysis against the control which bites and case study and other subway system it leads from the research which it sees and signal - train in base grudge to sleep it contributes it does.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1777-1783
• /
• 2013

This study aims to implement an instrumentation system measuring and analysing real-time data of information flow between respective subunits composing train control system as the performance evaluation method for wireless communication based urban railway train control system under development for a Korean model. It analyses system functional requirements regarding subsystems composing wireless communication based train control system and test items for functions presented in each specification and examines data and measurement point for measuring according to test items in order to implement an instrumentation system. And, it clearly defines requirements of an instrumentation system to avoid malfunction or error in operation of train control system. It reviews data processing method and display method for effective analysis of data flow between respective subunits with measured data, designs and makes an instrumentation system. Ultimately, it applies to a performance test of train control system and makes sure an instrumentation system in normal working order.

• 제어로봇시스템학회논문지
• /
• 제8권1호
• /
• pp.46-53
• /
• 2002

The brake system of a high speed train has a crucial role for the safety of the train. To develop a safe brake system of the high speed train, it is necessary to understand the braking principle and phenomena of the total brake system and its subsystems. In this paper, we have suggested a mathematical model which includes car dynamics, interactions between cars, adhesive forces, brake blending algorithm, and the dynamics of each brake devices. Also, we have proposed a ready-time compensation algorithm of eddy-current brake system and a brake control logic on electric-pneumatic blending. A simulation study has shown the proposed models and algorithms are effective on the braking of the train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1618-1628
• /
• 2011

The Train Diagnostic and Control System(TDCS) has been equipped on the modern Metro Vehicle, Locomotive and High Speed Train. The main purpose of this system is to support the identification of train status by real-time, the fast action against such failure events during revenue service and the fast convenient maintenance processes. Some of newest TCMS, a kind of control and monitoring system, has participated in the main control functions such as pantograph up and down, powering and braking command and so on. But these kind of control functions of the high speed train which has the operating speed over 300km/h are conducted by the train electrical logic circuits. The KTX-I and KTX-II - the local high speed train, are the typical example. The next generation TDCS for the ongoing project of distributed high speed train(HEMU) is designing with the target to increase main train control functions, to increase the reliability/avalibility and to increase the convenient driving. This paper introduces the overall configurations and functions of the new generation TDCS.