• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.905-910
• /
• 2013

Road facility has the high possibility of being damaged or destroyed due to continuous pass of the vehicles, overloaded vehicles, traffic accidents and so on and stormwater manhole, sewerage manhole that are installed on the road may cause the functional degradation in case of periodic pavement of the road. So management through establishing DB of road facility and efficient updating plan are required. Thus, this study used DGPS camera for efficient establishment and improvement of road facility DB. Applicability of DGPS camera could be suggested by satisfying the allowable accuracy required for establishing DB of road facility through the comparative analysis with the result of establishment of existing road facility DB and the process of DB establishment by existing total solution could be improved through process analysis. And the existing DB of road facility was improved so that the present conditions of surrounding topography and road facility can be grasped by developing the module that can add the images of road facility to digital map and Google Earth-based KML Builder. It is expected that road facility service that provides various information can be available if the spatial data of each local self-governing body and study of automation that utilizes DGPS camera images are accomplished hereafter.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.239-247
• /
• 2014

In modern society, the transportation sector is having difficulties with mobility, safety, energy and environment issues so that solutions should be prepared progressively. Recently developed countries are paying greater attention to car-sharing systems as alternatives for relieving problems caused by increasing number of vehicles. Car-sharing systems are believed to keep the number of personal vehicles down and traffic congestion due to the fact that this system induces efficiency of vehicle operation. In this study, authors focused on solving the imbalance problem of car-sharing systems dynamically, to specifically improve one-way car sharing service. Therefore vehicle relocation algorithm was designed for maximizing profit of car sharing operators. For the application of the vehicle relocation algorithm among rental offices, we selected Haeundae-gu, Busan as the area of study. Rental offices have been designated to the zone centroid and we calculated the shortest path between rental offices by using TransCAD. In the study, we adapted MATLAB for the application of vehicle relocation algorithm. As the results, the total vehicle relocation time was estimated as 59.9 minutes. In addition, vehicle relocation algorithm was verified successfully by using Decision Tree method.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.749-762
• /
• 2019

In recent years, in urban areas, underground of roads are being promoted in order to resolve traffic congestion and to secure green spaces, and due to the low ratio of large vehicles, they are planned or constructed as road tunnels for small cars only. In addition, the tunnels being built in the city is a tendency to be enlarged to play the role of main roads. Accordingly, the capacity of the ventilation system is increasing and various ventilation methods are required, and the importance of maintenance after the completion of the tunnel such as the operating cost of the ventilation system is emphasized. Therefore, the need for optimization of the operation stage for reducing the power consumption of the ventilation system and the study of the ventilation system operation control logic is increasing. In this study, the study on the necessity of the optimization of operation stage and control logic of the ventilation system was carried out to realize the energy-saving operation for the small car only passing through tunnels which is applied of ① jet fan and combination ventilation system (② jet fan + air purifying equipment, ③ jet fan + vertical shaft, ④ jet fan + supply air semi-transverse). As a result of this study, there can be various operating combinations in the case of the combined ventilation system, and even though the amount of ventilation air is the same, the operating power varies greatly according to the operating combinations. It was found that operating the axial fan first rather than the jet fan first operation method has an effect on power saving.

• The KIPS Transactions:PartD
• /
• v.12D no.2 s.98
• /
• pp.259-266
• /
• 2005

Recently data centric routing or application dependent routing protocols are emerged in mobile ad hoc networks. In this paper, we propose a routing method for query processing in MANET(Mobile Ad hoc NETwork) environment, called road-based query routing, with consideration on real time traffic information of large number of vehicles. In particular, we focus on the method that process arrival time dependent shortest path query in MANET without a central server on the road networks. The main idea of our approach lies in a routing message that includes query predicates based on the road connectivity and on data gathering method in real time from vehicles on the road by ad-hoc network. We unify route discovery phase and data delivery(query processing) phase in our mechanism and reduce unnecessary flooding messages by pruning mobile nodes which are not on the same or neighboring road segments. In order to evaluate the performances of the proposed method, we established a model of road networks and mobile nodes which travel along the roads. The measurement factor is the number of nodes to whom route request is propagated according to each pruning strategy. Simulation result shows that road information is a dominant factor to reduce the number of messages.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.71-82
• /
• 2016

Information System for rear-end collision avoidance is a unit service of C-ITS pilot project. Road environment that the number of vehicles at the same driving high-speed has a possibility that the communication delay or failure caused by heavy load of vehicle to vehicle communication. In this study, effects of the road network about a communication failure rate of information system for rear-end collision avoidance was analyzed quantitatively with micro traffic simulation. The simulation was carried out in situation that crash of two vehicles are occurred at merging area with speed limit 80km/h and information of collision is prvoided to the rear vehicle. From simulation results, it can confirm the trend of the increasing 14% of potential conflict according to 10% increasing of the communication failure rate. C-ITS service has a goal of increasing safety. The coommunication failure rate increases due to heavy load of vehicle causes a fatal result in road safety administrator position. For the success of C-ITS project, a communication system developers side should perform the effort to reduce the communication failure rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.2
• /
• pp.227-235
• /
• 2018

Along with the recent increase in traffic volume of vehicles, accidents involving rollover of vehicles have been rapidly increased, resulting in an increase casualties. And to prevent this, various technologies such as vehicle crash test equipment and analysis program development have been advanced. In this study, the applied vehicle model is FORD EXPLORER model, and PC-Crash program for vehicle collision analysis is used to predict the rollover accident behavior of SUV and the collision velocity. Compared with the actual rollover behavior of SUV through the FMVSS No 208 regulations, the analysis results showed similar results, the characteristics of the collision velocity and roll angle showed a tendency that the error rate slightly increased after 1000 msec. Then, as a result of considering using the database of NHTSA, it is shown that the rollover accident occur most frequently in the range of the collision velocity of 15~77 km/h and the collision angle of $22{\sim}74^{\circ}$. And it is possible to estimate the vehicle speed and collision time when the vehicle roof is broken by reconstructing the vehicle starting position, the roof failure position and the stop position by applying the actual accident case.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.628-637
• /
• 2017

The automobile industry has developed Advanced Driver Assistance Systems (ADASs) to prevent traffic accidents and reduce the burden for drivers. One example is the Lane Keeping Assistance System (LKAS), which was developed for automotive vehicle systems for safety and better driving. The main system of the LKAS supports the driver while maintaining the vehicle within a lane. LKAS uses a radar sensor and camera sensor to collect information about the vehicle's position in the lane and send commands to the actuator to influence the lateral movement of the vehicle if necessary. Recently, vehicles equipped with LKAS have become commercially available. Test procedures for international LKAS evaluation are being discussed and developed by international committees, such as the International Organization for Standardization and United Nations Economic Commission for Europe. In Korea, an evaluation of LKASs for car safety is being planned by the Korean New Car Assessment Program. Therefore, test procedures should be developed for LKASs that are suitable for the domestic road environment while accommodating international standards. We developed a test scenario for LKASs and propose a formula for obtaining the target relative distance. To validate the methods, a series of experiments were conducted using commercially available vehicles equipped with LKAS.

• Journal of Preventive Medicine and Public Health
• /
• v.6 no.1
• /
• pp.43-49
• /
• 1973

In this study noise source in a ward at four general hospitals in Seoul area has been investigated and analysed. The degree of reaction against noise by 171 randomly has also been examined. The results of the study have shown that the source of noise is the speakers of wired broadcasting or from visiting guests in two hospitals located in residential area. The patients at the two other hospitals located at commercial site have been suffered more from traffic noise. However, because of their separated living at hospital from their ordinary houselife, sixty one percent of the inpatients have wished a music sound of around 60 dB (A). After having considered the results of the investigation and wishes of the inpatients, following suggestions have been made: 1. Reduce the number of guests or their length of stay. 2. Wired broadcasting system should be substitued by wireless one, or if it's unavoidable, it should be used in office rooms only. 3. Since the stops and starts of vehicles induce much noise, Seoul City Government be requested to prepare an appropriate administrative measure for the vehicles around hospital area and it should prevent the establishment of new hospitals along high way site. 4. By using earphone, inpatients can choose a wireless channel according to each individual's taste. This through the masking effect, would cover up the noise source. 5. Rooms along the streets should be utilized as offices, otherwise double windows should be set up for inpatient's wards.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.71-82
• /
• 2003

The shortest path problems(SPP) are critical issues in the military logistics such as the simulation of the War-Game. However, the existing SPP has two major drawbacks, one is its accuracy of solution and the other is for only one solution with focused on just link cost in the military transportation planning models. In addition, very few previous studies have been examined for the multi-shortest path problems without considering link capacity reflecting the military characteristics. In order to overcome these drawbacks, it is necessary to apply the multi-shortest paths algorithm reflecting un-expected military incidents. This study examines the multi-shortest paths in the real networks using Shier algorithm. The network contains both military link capacity and time-based cost. Also, the modes are defined as a platoon(group) rather than unit which is used in most of previous studies in the military logistics. To verify the algorithm applied in this study. the comparative analysis was performed with various sizes and routes of network which compares with Dijkstra algorithm. The major findings of this study are as follows ; 1) Regarding the unique characteristics of the military transportation plan, Shier algorithm, which is applied to this study, is more realistic than Dijkstra algorithm. Also, the time based concept is more applicable than the distance based model in the military logistics. 2) Based on the results from the various simulations of this study the capacity-constraint sections appeared in each scenarios. As a consequence, the alternatives are necessary such as measures for vulnerable area, improvement of vehicle(mode), and reflection of separated-marching column in the military manuals. Finally. the limits and future research directions are discussed : 1) It is very hard to compare the results found in this study. which is used in the real network and the previous studies which is used in arbitrary network. 2) In order to reflect the real military situations such as heavy tanks and heavy equipment vehicles. the other constraints such as the safety load of bridges and/or the height of tunnels should be considered for the future studies.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.70-81
• /
• 2020

Point-by-point data, which is abundantly collected by vehicles with embedded GPS (Global Positioning System), generate useful information. These data facilitate decisions by transportation jurisdictions, and private vendors can monitor and investigate micro-scale driver behavior, traffic flow, and roadway movements. The information is applied to develop app-based route guidance and business models. Of these, speed data play a vital role in developing key parameters and applying agent-based information and services. Nevertheless, link speed values require different levels of physical storage and fidelity, depending on both collecting and reporting intervals. Given these circumstances, this study aimed to establish an appropriate collection interval to efficiently utilize Space Mean Speed information by vehicles with embedded GPS. We conducted a comparison of Probe-vehicle data and Image-based vehicle data to understand PE(Percentage Error). According to the study results, the PE of the Probe-vehicle data showed a 95% confidence level within an 8-second interval, which was chosen as the appropriate collection interval for Probe-vehicle data. It is our hope that the developed guidelines facilitate C-ITS, and autonomous driving service providers will use more reliable Space Mean Speed data to develop better related C-ITS and autonomous driving services.