• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.2 s.25
• /
• pp.139-144
• /
• 2006

Recently, ships' average navigation speed become faster than before because of the increasing of high-speeds vessel including container ships and passenger-ferries. So, it is considered that the speed limit in the navigation channel in Korea isn't proper for vessel management in these days. Also, there is rare paper studies about the speed limit quantitatively and numerically, especially the speed limit is discussing continuously, as abrogation of Incheon Port's speed limit and alleviation of Gwang-yang Port's speed limit according to the requests by the navigating mariners. Consequently this paper deals with the effectiveness of speed limits using the Environmental Stress Model, after replay of the navigation traffic flow in the straight waterway using marine traffic flow simulation technique.

• Wind and Structures
• /
• v.24 no.3
• /
• pp.287-306
• /
• 2017

In the present study, a new assessment simulation of ride safety based on a new wind-traffic-pavement-bridge coupled vibration system is developed considering stochastic characteristics of traffic flow and bridge surface. Compared to existing simulation models, the new assessment simulation focuses on introducing the more realistic three-dimensional vehicle model, stochastic characteristics of traffic, vehicle accident criteria, and bridge surface conditions. A three-dimensional vehicle model with 24 degrees-of-freedoms (DOFs) is presented. A cellular automaton (CA) model and the surface roughness are introduced. The bridge deck pavement is modeled as a boundless Euler-Bernoulli beam supported on the Kelvin model. The wind-traffic-pavement-bridge coupled equations are established by combining the equations of both the vehicles in traffic, pavement, and bridge using the displacement and interaction force relationship at the patch contact. The numerical simulation shows that the proposed method can simulate rationally useful assessment and prevention information for traffic, and define appropriate safe driving speed limits for vulnerable vehicles under normal traffic and bridge surface conditions.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.11-24
• /
• 2017

Although many efforts to stop speeding or inappropriate speed, it failed to reduce the number of speeding-related crashes. Therefore, it is important to analyze the characteristics of speeding offenders and the cause of speeding at hot spots. In this study, we investigate the level of severity in speeding by the characteristics of speeding offenders using the Ordered Logistics Regression Models(OLRM). For the analysis, we use the speeding data collected by 39 traffic enforcement cameras in city of Cheongju and other related data including the speeding ticket history of drivers during the most recent 3 years, their demographic characteristics, their own vehicles, and road environment factors. The major results of this study are as follows. Firstly, commercial fleet drivers are more likely to repeat the conviction of high-range speeding with more than 30km/h over speed limits than other drivers. Secondly, mid-range speeding are observed as 21,462 frequency which is 76.7% of total speeding frequency and occurred mostly at suburban and rural area. It concludes that contributory factors affecting the severity of speeding at signalized intersection are drivers' speeding offence history, posted speed limits, time of day, gender of driver, and location of the intersection as show by the OLRM developed in this study(McFadden R-square : 0.296).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.443-446
• /
• 2002

A vehicle oversteered or cornering at excessive speed leaves tire yaw mark on the road surface. A yaw mark is a sign that the tire was sideslipping and exceeded its frictional limit because of centrifugal force. Problems exist with the traditional equation, “critical speed formula (CSF)”, that limits its practical use in traffic accident reconstruction. A major problem is that the equation dose not account for vehicle dynamics and interface between tire and road. The literature refers to that the accuracy of the critical speed formula varies with several factors. New equations that account for vehicle dynamics are introduced in this paper. A comparison of the accuracy of the new method and the traditional method in the calculation of speed is conducted.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.369-376
• /
• 1997

With recent progress of developing infrastructure, construction vibration from the sites and traffic vibration caused by high-speed rail, subway, and roads is becoming a hazardous factor for vibration environment. In order to predict the damages caused by the vibrations mentioned above the vibration sources, have to be distinguished between point vibration and line vibration. Once the character of the vibration source is determined vibration propagation phenomenon needs to be analyzed by using prediction formula, and compared to the limits authorized by the law. The main purpose of this thesis is to manage the efficient vibration by reflecting these finding in making a consrtuction plan. Therefore, Vibration Management System (VMS) was developed which can predict and analyze the extent of developed utilizing Geographic Information System (GIS) to build a database. This database contains the attribute and the location information of the sources for predicting the formula of explosive vibration and subway traffic vibration, the buildings, the surrounding area and measurement sites. VMS will be useful in the future for predicting the vibrations caused by pile drive, traffic vibrations such as high speed electric railway, highway and roads, and other explosive vibrations by supplementing and updating the database.

• Journal of Environmental Health Sciences
• /
• v.34 no.5
• /
• pp.395-402
• /
• 2008

Road traffic noise causes considerable disturbance and annoyance in exposed inhabitants. Particularly, arterial road noise is a significant environmental problem in many urban areas in which higher traffic volume and higher car speed occur. Arterial road noise became the target of this investigation in Seoul, South Korea. Noise levels were measured at four points that were based on distance from roadside at the same measurement site and under the conditions as reported by the National Institute of Environmental Research (NIER) in 1999. The average noise levels ($L_{eq,1h}$) of the arterial road was 80.3 dBA at 5 m, 77.4 dBA at 10 m, 73.7 dBA at 20 m, 70.9 dBA at 30 m. A comparison between 1999 and 2008's measurement values has shown that in 2008 noise level is up by about 1.5 dBA, traffic volume has increased by about 15.7%, while car speed has decrease by about 8%. The relationship between 2008' measured values and predicted values using the NIER Equation is low under 10 m from the roadside. The influence range of arterial noise is calculated at 26 m for road noise limits in daytime. In relation to the comparison between traffic volume and noise level, the equivalence in traffic volume (Light car+10xHeavy car) is higher than other variables.

• International Journal of Highway Engineering
• /
• v.18 no.3
• /
• pp.95-107
• /
• 2016

PURPOSES : This study compared two measures of traffic flow effectiveness on roads with roundabouts and signalized intersections and determined the more appropriate measure. METHODS : In addition to average delay time, the conventionally used measure, average travel time was introduced to measure traffic flow effectiveness because it is able to be obtained through field survey and reflect different travel distances and speed limits of roundabouts and signalized intersections. Using the two measures, roundabouts and signalized intersections were compared through simulations in terms of traffic flow effectiveness. RESULTS : For one-way single-lane roads, the two measures indicated consistent results that roundabouts were more effective than were signalized intersections when the traffic volume was less than 300 vphpl but vice versa when it exceeded 450 vphpl; however, the measures yielded inconsistent results when the volume was 350~400 vphpl. For one-way double-lane roads, the two measures indicated consistent results that roundabouts were more effective than were signalized intersections when the volume was less than 200 vphpl but vice versa when it exceeded 400 vphpl; however, the measures yielded inconsistent results when the volume was 250~350 vphpl. The results obtained using the two measures differed substantially for double-lane roads because behaviors such as weaving and lane changing at roundabouts are more common in double-lane roads than in single-lane roads. CONCLUSIONS : The average delay time would be lower on roads with roundabouts, but average travel time would be lower on roads with signalized intersections. Thus, evaluating the relative effectiveness of roads with roundabouts and signalized intersections by using average delay time alone would be inappropriate, whereas using average travel time as the evaluation index would yield fairer results.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.63-69
• /
• 2010

Since speed limit enforcement in school zones is the most important to reduce the occurrence of severe child related accidents, school zones typically have a speed limit of 30km/h. However, it is found that the majority of vehicles passing school zones are traveling over 30km/h. This indicates that school zones are not being effectively operated to achieve the main objective which is the reduction of child related accidents. This study aims to identify the factors affecting the violation of speed limits in school zones through the results of field survey from 8 elementary schools. The results showed that time period, the number of lanes, the width of sidewalks, and the status of colored pavement were found to be highly associated with the violation of speed limits in school zones at the 95% significance level. The results of this study may provide some insights for making safe environments around schools.

• International Journal of Railway
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2013

This paper provides an overview of Pakistan Railways scheduling and rescheduling. First of all, Pakistan Railways is introduced with its brief history and importance in this country. Assets of this network with passengers and freight using this are given. Current hope less situation is leading to privatization of this system as well as promoting short distance traveler to use road and Government efforts to retain is also presented. Train scheduling in Pakistan is being done manually, based on manual time distance graph preparation and resolution of conflicts based on manager's experience and ability. In Real-time management of this traffic Lahore head office is connected with six control stations in the Pakistan, decision for resolution of any disturbance is coordinated among them. It is recommended that computer aided tools must be developed for this system to help traffic managers and it is needed to invest on the segments to increase their speed limits which might attract passengers to use this mode of transportation with high priority.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.8-18
• /
• 2005

Pedestrians involved in traffic accidents manifest unique trajectory characteristics depending on the collision speed, vehicle configuration, and pedestrian postures. However, the existing analytical models for pedestrian movements do not fully include the rotational characteristics of the pedestrians because they assume a two dimensional parabolic trajectory. This faulty assumption in the development of these models limits their applicability and reliability This study investigated the pedestrians movement at collision by computer simulation. The simulations are carried out by using HADYMO, which is a special simulation software system for dynamic movement analysis. Vehicles and pedestrians are modeled and verified via real crash worthiness experiments. Simulations are performed for various collision speeds, vehicle configuration, and pedestrian postures. Since the simulation uses multi-body dynamics, It can express irregular phenomena of the bodies quite well. The results can be exploited for vehicle design and traffic accident reconstruction.