• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.209-217
• /
• 2024

Recent years have seen a notable increase in fire incidents in university cafeterias, yet the social attention to these occurrences remains limited. Despite quick responses to these incidents preventing loss of life, the need for large-scale evacuation in such high foot traffic areas can cause significant disruptions, economic losses, and panic among students. The potential for stampedes and unpredictable damage during inadequate evacuations underscores the importance of fire safety and evacuation research in these settings. Previous studies have explored evacuation models in various university environments, emphasizing the influence of environmental conditions, personal characteristics, and behavioral patterns on evacuation efficiency. However, research specifically focusing on university cafeterias is scarce. This paper addresses this gap by employing Pathfinder software to analyze fire spread and evacuation safety in a university cafeteria. Pathfinder, an advanced emergency evacuation assessment system, offers realistic 3D simulations, crucial for intuitive and scientific evacuation analysis. The studied cafeteria, encompassing three floors and various functional areas, often exceeds a capacity of 1500 people, primarily students, during peak times. The study includes constructing a model of the cafeteria in Pathfinder and analyzing evacuation scenarios under different fire outbreak conditions on each floor. The paper sets standard safe evacuation criteria (ASET > RSET) and formulates three distinct evacuation scenarios, considering different fire outbreak locations and initial evacuation times on each floor. The simulation results reveal the impact of the fire's location and the evacuation preparation time on the overall evacuation process, highlighting that fires on higher floors or longer evacuation preparation times tend to reduce overall evacuation time.In conclusion, the study emphasizes a multifaceted approach to improve evacuation safety and efficiency in educational settings. Recommendations include expanding staircase widths, optimizing evacuation routes, conducting regular drills, strengthening command during evacuations, and upgrading emergency facilities. The use of information and communication technology for managing emergencies is also suggested. These measures collectively form a comprehensive framework for ensuring safety in educational institutions during fire emergencies.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.241-248
• /
• 2012

Although infrastructure cost comprises the great proportion of residential development cost, all of it tends to be borne by land developers which develop large area. This brings about free-riding by adjacent small development or built-up area, followed by the equity problem in terms of infrastructure development cost sharing and the privatization of development gain. This study aims to establish the method to analyze free-riding on the transportation infrastructure(roads) and investigate empirically how much the free-riding occurs. It sets several development scenarios to calculate the part generated by Bucheon Sangdong district, the case area of this study, of all the traffic flow on the roads. The Network analysis is used to estimate the proportion, by development scenarios, of traffic flow, travel time, and travel cost. As a result, the developer of Bucheon Sangdong district is responsible for 83% of the construction cost of selected roads. The methodology and empirical result of this study would contribute to determine who are liable for the infrastructure facilitation and to estimate how much of the cost the obligators have to share.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.1-12
• /
• 2010

This paper deals with the transmission interval of vehicle data in smart highway where WAVE (Wireless Access for Vehicular Environments) systems have been installed for advanced road infrastructure. The vehicle data could be collected at every second, which is containing location information of the vehicle as well the vehicle speed, RPM, fuel consuming and safety data. The safety data such as DTC code, can be collected through OBD-II. These vehicle data can be used for valuable contents for processing and providing traffic information. In this paper, we propose a model to decide the collection interval of vehicle information in real time environment. This model can change the transmission interval along with special and time-variant traffic condition based on the 32 scenarios using microscopic traffic simulator, VISSIM. We have reviewed the transmission interval, communication transmission quantity and communication interval, tried to confirm about communication possibility and BPS, etc for each scenario. As results, in 2-lane from 1km highway segment, most appropriate transmission interval is 2 times over spatial basic segment considering to communication specification. In the future, if a variety of wireless technologies on the road is introduced, this paper considering not only traffic condition but also wireless network specification will be utilized the high value.

• Journal of Korean Society of Transportation
• /
• v.31 no.5
• /
• pp.3-15
• /
• 2013

The purpose of this study is to propose a methodology for operating variable speed limit (VSL) strategies in freeway work zones. A notable feature in this study is to incorporate a multi-criteria decision making process into deriving better VSL strategies. Decision criteria in this study include operational efficiency, safety, and environmental impacts. Travel speed, acceleration noise, and CO2 were used as performance measures for evaluating VSL strategies. A multi-criteria value function was developed through an analytical hierarchical process (AHP) for representing expert's knowledge. Then, a variety of VSL operations scenarios were investigated utilizing a microscopic traffic simulation suite, VISSIM. The proposed methodology would be useful in supporting more efficient, safer, and more environment-friendly traffic operations and control in freeway work zones.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.106-117
• /
• 2021

In Korea, interest in truck platooning is increasing because most cargo transportation is done by road. Truck platooning is the operation of two or more trucks in a row to form one platoon, which can increase road capacity and improve fuel efficiency. In this study, to analyze the effect of truck platooning on traffic flow, scenarios were created according to traffic conditions and truck platooning operating conditions. In order to understand the effect of the truck platooning operating conditions, correlation analysis was conducted with the average travel speed, the number of lane change disturbance, and the number of disturbance in the entry/exit section. As a result, the number of trucks in the platoon, the spacing of trucks in the platoon, and the spacing between platoons were found to have an effect on the average speed and the number of lane change disturbance In addition, the truck platooning ratio was found to have a strong correlation with the average travel speed and the number of lane change disturbance regardless of the LOS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.41-48
• /
• 2009

The capacity analysis of signalized intersection usually includes a HCM method used at home and abroad and a ICU method this study presents. The HCM method focuses on operation analysis measuring an intersection's delay in terms of given traffic volume, signal operation, and intersection structure data. This method includes planning and design analysis, but these analyses are complex due to being possible through repetitive operation analysis. However the ICU method is a powerful tool for planning and design analysis, because these are possible through brief traffic volume and geometry structure data and consider minimum green time. In this study, the authors studied the ICU method and compared the HCM and ICU by analyzing traffic volume scenarios. Also to consider effectiveness for application of the ICU method, the authors applied the ICU to capacity analysis of intersections on urban arterial for setting major intersection and effect analysis for changing crosswalk type, the number of lane, lane use and operation form of left turn. The result of the analyses shows that the ICU method can measure correct capacity of intersection consist of a broad road in urban area, and is effective for planning and design analysis. This study is expected that traffic experts can grasp correct intersection's capacity and carry out a proper planning or improvement by applying the ICU method to planning and design analysis.

• Journal of Information Processing Systems
• /
• v.12 no.2
• /
• pp.196-213
• /
• 2016

System Architecture Evolution (SAE) with Long Term Evolution (LTE) has been used as the key technology for the next generation mobile networks. To support mobility in the LTE/SAE-based mobile networks, the Proxy Mobile IPv6 (PMIP), in which the Mobile Access Gateway (MAG) of the PMIP is deployed at the Serving Gateway (S-GW) of LTE/SAE and the Local Mobility Anchor (LMA) of PMIP is employed at the PDN Gateway (P-GW) of LTE/SAE, is being considered. In the meantime, the Host Identity Protocol (HIP) and the Locator Identifier Separation Protocol (LISP) have recently been proposed with the identifier-locator separation principle, and they can be used for mobility management over the global-scale networks. In this paper, we discuss how to provide the inter-domain mobility management over PMIP-based LTE/SAE networks by investigating three possible scenarios: mobile IP with PMIP (denoted by MIP-PMIP-LTE/SAE), HIP with PMIP (denoted by HIP-PMIP-LTE/SAE), and LISP with PMIP (denoted by LISP-PMIP-LTE/SAE). For performance analysis of the candidate inter-domain mobility management schemes, we analyzed the traffic overhead at a central agent and the total transmission delay required for control and data packet delivery. From the numerical results, we can see that HIP-PMIP-LTE/SAE and LISP-PMIP-LTE/SAE are preferred to MIP-PMIP-LTE/SAE in terms of traffic overhead; whereas, LISP-PMIP-LTE/SAE is preferred to HIP-PMIP-LTE/SAE and MIP-PMIP-LTE/SAE in the viewpoint of total transmission delay.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.39-49
• /
• 2010

Provision of in-vehicle warning information is of keen interest since it can be effectively used to prevent traffic accident on the road. This study evaluates the effectiveness of information provision modalities based on kansei engineering. Various warning information scenarios using different modalities are devised for the evaluation. Statistical data analysis techniques including factor analysis, correlation analysis, and the general linear model are used to assess the user's affect for information modalities. The evaluation result shows that the provision of visual information consisted of 'text and pictogram' leads to higher understandability. The combination of beep sound and voice message' was identified as a more effective modality for auditory warning. In addition, the red color for the blinking warning signal was preferred by users.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.75-82
• /
• 2016

PURPOSES : This study was initiated to estimate the benefits from the campaign to prevent drowsy driving crashes on expressways. The study was conducted by the Korea Expressway Corporation using a contingent valuation method. METHODS : First, a questionnaire was designed for a preliminary survey. From the survey's results, the initial willingness to pay for the campaign was determined by averaging different amounts of payments chosen under virtual scenarios in the survey. The willingness to pay data was used to find a first bid price for the open-ended method used for the second survey. After that, a primary questionnaire was designed and conducted using a single dichotomous choice question (SDBCQ). Drivers at expressway resting areas were asked their willingness to pay for the campaign. Based on statistical analysis using data collected from the second survey, the mean willingness to pay was estimated using a probability utility function. Finally, the benefit from the campaign was calculated using the estimated willingness to pay and accident data on expressways. CONCLUSIONS : Based on the result from the contingent valuation method, the benefit from the campaign to prevent drowsy driving crashes was estimated to be 170.6 won per expressway trip. The benefit is to be paid as an additional toll. In addition, the traffic crash cost estimate is about 2,209,680,000 won less than the cost during the same period in 2014.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.36-42
• /
• 2017

An airport surface movement scheduler using first-come first-served (FCFS) algorithm is developed to efficiently manage surface traffic in an airport. It is based on the previously developed traffic flow management scheduler. Link directionality and intersection processing, which are additional constraints for ground movement, are added to the scheduler. To verify each of additional constraints, several simulations were performed by making simple scenarios, and the results show that all constraints were satisfied. Also, a simulation was performed by making a scenario based on flight operation information system (FOIS) data which is real departure and arrival flight data of Jeju airport. To determine the practicality of the developed scheduler, we compare the actual average delay time with the average delay time calculated by the scheduler.