• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.55-65
• /
• 2010

We present a method for increasing network lifetime without link failure due to lack of battery capacity of nodes in wireless ad-hoc networks with low mobility. In general, a node with larger remaining battery capacity represents the one with lesser traffic load. Thus, a modified AODV routing protocol is proposed to determine a possible route by considering a remaining battery capacity of a node. Besides, the total energy consumption of all nodes increase rapidly due to the huge amount of control packets which should be flooded into the network. To reduce such control packets efficiently, a source node can store information about alternative routes to the destination node into its routing table. When a link failure happens, the source node should retrieve the route first with the largest amount of the total remaining battery capacity from its table entries before initiating the route rediscovery process. To do so, the possibility of generating unnecessary AODV control packets should be reduced. The method proposed in this paper increases the network lifetime by 40% at most compared with the legacy AODV and MMBCR.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.161-172
• /
• 2007

Vehicles transporting hazardous materials can make huge damage to people, properties and environment by traffic accidents. Therefore, transporting hazardous materials is a big issue with the cutting edge technology of communications in these days. However, despite this situation, Korean government gives limited efforts for systematic management, research and investment about hazardous materials. Accordingly, this research suggests the key path finding algorithm about management of real-time schedule and routes for vehicles transporting hazardous materials. Besides, the case study is progressed in transportation networks of Seoul in order to evaluate the reality of algorithm. Specifically, time-space network transformation is performed for time window attributes. In addition, this study proposes the techniques searching for non-dominated paths considering schedule by the multiobjective shortest path algorithm based on dynamic programming in dynamic transportation networks including multiobjective attributes.

• Journal of the Korean association of regional geographers
• /
• v.11 no.3
• /
• pp.351-366
• /
• 2005

In Joseon dynasty, national roads for mainly official trips, were designed to connect capital directly to each county seat or eupchi, and militarily strategic points. The entrance of county seat where national road reach to (sometimes there has been a gate of fortress), regarded as main entrance of the county seat Also the direction county office or gwan-a ordinally heads was regarded as main entrance. Therefore, starting point of national road from county seat was not always heading for capital, but south because most of county offices head south. Nevertheless, actual traffic often ignore such a symbolic rule, and formed another practical routes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.1 s.28
• /
• pp.55-60
• /
• 2007

Many electric power cables span the sea in Korean archipelago. Lots of shipping routes were established between the islands in the same area and ships frequently sail under the cable which cross the seas. Sometimes electric power cables were accidently broken by sailing ships and catastrophic damage of island industry followed thereby. If navigators have detailed knowledge about the height of electric power cable, the ship's sailing condition will be greatly improved. But at the present time, navigators have limited data about the electric power cable. Those are the horizontal distance between pylons, the height of pylons and minimum height of electric power cable. This study introduced the calculating methodology to find out the height of cable at any position between pylons. The ship's tracks were recorded and traffic safety was assessed by statistical method in relation to cable height.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.322-330
• /
• 2009

Traffic congestions in local cities have been getting worse since 1990s, so many local governments have considered the introduction of an LRT system. So far, there is no city operating the LRT due to social environments, financial reasons, feasibility and so on. But still many cities have examined LRT or started the construction. Until now, more than 30 cities are constructing LRT or planning the introduction of LRT and it becomes 96 routes, approximately 700km. With the support of MLTM, KRRI has developed automatic LRT system with rubber-wheels, K-AGT as a result of "LRT system technology development project" from 1999 to 2005 by investing 50.32 billion wons(the public 37, the private 13.32) and finished running durability test of 100,000km at Kyeong-san test line. Currently, two trains, coupled two cars respectively have running and signaling tested. K-AGT was appointed to supply for an extension line at Busan Subway Line 3(Minam-Anpyeong section) with 17 trains(six-unit car) 102 cars. However, except for Minam-Anpyeong section, other cities such as Uijeongbu, Yongin, Daegu(Line 3) and Kwangmyeong decided to use the foreign systems, not to use the product, a result of national R&D project. This results in a huge waste of foreign currency and it is expected to require much additional cost for maintenance. If local governments use the products of national R&D projects, many national benefits such as reducing imports and protecting home industries could be expected, therefore in this paper, some plans to encourage to use products of national R&D projects were dealt with.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.150-157
• /
• 2006

Founded on a close relationship between exhibition scenarios and media, this study was conducted 1) to establish exhibition arrangement types by using three analytical indicators, such as arrangement types of exhibition, groupings of similar exhibition media, and exhibition density; and 2) to demonstrate the importance of considering the characteristics of exhibition arrangement types by using viewing behavior codes as a major analytical indicator. The following three types were investigated in this research: First, the Independent type (Type C) was found to be strongly influenced by architectural and spatial forms, especially by low exhibition density and high visual information. Also, compared with the Wall Dominant type, low number of viewing behavior codes and distribution was found even though there were high correlations among viewing behavior codes. This is assumed to be due to low exhibition density. Second, the Wall Dominant type (Type A) was found to be not influenced by architectural and spatial forms. This is because space is planned and restructured centering on the wall type showcases. At the planning stage of exhibition, it is easy to divide or combine space according to the contents and structure of exhibition scenarios. Compared with the Independent type, low correlations were found among viewing behavior codes. This is due to low participation or manipulation exhibitions. However, this implies that more active viewing behaviors can be induced if appropriate exhibition techniques and arrangement methods are used for each exhibition content. Third, the Independent Dominant type (Type B) was found to confuse visitors in selecting routes by displaying too many exhibits at a limited space in a disorderly fashion. It failed to attract visitors to the main exhibition area, where a big space is formed in the center. Visitors were found to view exhibits that are arranged near the major traffic line.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.800-801
• /
• 2017

Location-based services (LBS) are used in various applications such as emergency support, navigation, location, traffic routes, information gathering, and entertainment due to the rapid growth of information communication technologies and mobile phones. In general, locations are represented by coordinates and are related to terrain. These are of great interest in mobile-based data transmission. This paper proposes a method to exchange the contact of the other party by detecting the movement of the mobile phone of the individual user based on the location-based service. The proposed method extracts motion using the acceleration sensor of the mobile phone and transmits the location and time information to the server when the motion continues for a predetermined time. Attempts to establish a connection between users who are experiencing motion in mobile phones in the short distance have been made from the server. Once the connection between the users is made, the encrypted contact is received from the server. Experimental results show that the proposed method can exchange data by minimizing the processing in the handset compared with the existing method.

• Convergence Security Journal
• /
• v.10 no.1
• /
• pp.41-48
• /
• 2010

Greedy protocols show good performance in Vehicular Ad-hoc Networks (VANETs) environment in general. But they make longer routes causing by surroundings or turn out routing failures in some cases when there are many traffic signals which generate empty streets temporary, or there is no merge roads after a road divide into two roads. When a node selects the next node simply using the distance to the destination node, the longer route is made by traditional greedy protocols in some cases and sometimes the route ends up routing failure. Most of traditional greedy protocols just take into account the distance to the destination to select a next node. Each node needs to consider not only the distance to the destination node but also the direction to the destination while routing a packet because of geographical environment. The proposed routing scheme considers both of the distance and the direction for forwarding packets to make a stable route. And the protocol can configure as the surrounding environment. We evaluate the performance of the protocol using two mobility models and network simulations. Most of network performances are improved rather than in compared with traditional greedy protocols.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2015

It is necessary to determine real path for urban railway users in order to allocate revenues between urban railway organizations. Out of several algorithms used to determine optimal routes, the k-path algorithm based on link-label has been utilized. However, this k-path algorithm has certain flaws. For example, optimal route can change depending on the travel and walking time, transfer penalty, and so on. Also, this algorithm cannot take into account the characteristics of users, who prefer express train to normal trains. In this paper, an algorithm is proposed to determine one single optimal route based on the traffic card data. This method also can search for an optimal path in conjunction with the railway timetable.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.591-598
• /
• 2008

Recently, the government has improvement projects of dangerous road for the site that has very high accident rate due to bad geometric structures of the road. Although, route selecting of the road is a basic and important process, but the process of route selecting must consider the technical, safety and environment factor together. Also, the technology for the 3-dimensional terrain model can be used as an important factor in planning and designing for selecting alternative route projects. In the course of experimenting with the 3-dimensional topography generated by the combination of the digital map and drawing of route, the technology as been developed to offer the multi-dimensional access to the potential construction sites from the nearby main roads. This 3-dimensional digital elevation model has made it possible to make various terrain analysis base on GIS, which provides real-time virtual access to the designated construction sites for development planning and construction projects. Therefore, this study presents a reasonable plan for route selecting from some alternative routes through subjective evaluation and classify the methods linked basic design of road construction.