• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.17-24
• /
• 2021

Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO₂ to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85℃, PSCs without the buffer layers were degraded by forming PbI₂, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85℃-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.137-142
• /
• 2021

This study investigated the patterns of acquiring anti-mycobacterial resistance in individuals who were susceptible to all anti-mycobacterial drugs in their initial treatment. From 2010 to 2019, anti-mycobacterial drug susceptibility tests were conducted on patients who were referred to the Green Cross Laboratories. The test results of 594 anti-mycobacterial drug sensitivity tests were collected at 111 medical institutions. The first test results had 594 cases in which all anti-mycobacterial drugs were susceptible. Isoniazid (INH), rifampin (RIF), streptomycin (SM), and quinolone (QUI) showed the highest single-resistant conversion rates. Out of 56 patients, 17 patients (30.4%) showed a high conversion rate of resistance to both INH and RIF. The tracking period was analyzed from a minimum of 98 days to 1,862 days, and an average of 435.6 days for INH, and a minimum of 108 days to 1,673 days, with an average of 457.7 days for RIF. In the case of tuberculosis patients who are susceptible to all anti-mycobacterial drugs, it is considered that the conversion to resistant and multi-drug resistant tuberculosis (MDR-TB) must be confirmed through an anti-mycobacterial susceptibility test after 3 months. It is hoped that this study will help the national tuberculosis management project to improve public health.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.176-186
• /
• 2008

The radio frequency identification (RFID) technology allows various forms of applications in many industries including construction. and in Korea, RFID has already been adopted for the use in daily labor control, logistics monitoring of ready-mix concrete, supply chain management of long-lead items, such as structural steel members and curtain walls. Even though RFID tags have varied reading performances depending on various factors including material of tracking target and surrounding environment, there is no information on how much the reading performance of an RFID tag can be achieved against a specific construction components or materials. Therefore, the objective of this research is to identify the actual reading performance of various RFID technologies and to derive a method to maximize the reading performance for the use in the supply chain management process of curtain wall components.

• Agribusiness and Information Management
• /
• v.6 no.2
• /
• pp.24-31
• /
• 2014

This paper is a study on what kind of effect non-verbal communication in mobil electronic commerce has on purchase intention and visual attention. For this purpose, the screen of mobile shopping mall produced arbitrarily was exposed to the experimental group and the control group. The experimental group was exposed to the screen of mobile shopping mall that expressed non-verbal communication making use of cinemagraph images and the control group was exposed to the screen of mobile shopping mall based on still images. For the study, survey research and experimental research were conducted simultaneously. Data of survey research were analyzed by MANOVA and t-test, and by using eye-tracker experimental research recorded the duration of time that the subjects stared images. The results of experiment show that in non-verbal communication the experimental group that saw cinemagraph images recorded shorter average staring time than the control group that saw ordinary images, and the cinemagraph had statistically significant effect on visual attention as well. And it was analyzed that non-verbal communication had significant effect on the purchase intention of the experimental group, but had no effect on the purchase intention of the control group. The results can be interpreted that the people who saw cinemagraphs in mobile shopping environment had spent shorter time in seeing products than the people who saw ordinary images, but still the former came to have purchase intention on the products. The results of the present study can be useful for marketers who try to sell agrifood in mobile environment.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.2
• /
• pp.67-73
• /
• 2012

Asphalt pavement waste can be recycled by crushing and heating methods with additional virgin materials and additives. In this study, a new additive using Sasol wax and Polyolefin elastomer was used for improving the quality of the Superior recycled asphalt pavement(SRP). Additive was added into the recycled mixture by 1.5% and 3% of binder content in order to have PG 70-22 and PG 76-22. Both mixtures were tested by Marshall apparatus, indirect strength testing methods, toughness testing methods, moisture susceptibility testing methods and wheel tracking testing methods. Test results met the standards of KS F 2349 and GR F 4005. Through research, it was found that these special recycled mixtures could be applied for the surface and base course of heavy traffic roads or equivalents. About 13,000 tons of the recycled mixture has been applied on Seoul Olympic road to provide new road to Hangang park for Seoul citizens.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.3
• /
• pp.193-206
• /
• 2013

The detector subsystem of the Optical Wide-field Patrol (OWL) network efficiently acquires the position and time information of moving objects such as artificial satellites through its chopper system, which consists of 4 blades in front of the CCD camera. Using this system, it is possible to get more position data with the same exposure time by changing the streaks of the moving objects into many pieces with the fast rotating blades during sidereal tracking. At the same time, the time data from the rotating chopper can be acquired by the time tagger connected to the photo diode. To analyze the orbits of the targets detected in the image data of such a system, a sequential procedure of determining the positions of separated streak lines was developed that involved calculating the World Coordinate System (WCS) solution to transform the positions into equatorial coordinate systems, and finally combining the time log records from the time tagger with the transformed position data. We introduce this procedure and the preliminary results of the application of this procedure to the test observation images.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.107-113
• /
• 2014

In this study, we design and implement an eye-gaze estimation system based on the extraction of eye contour and pupil region. In order to effectively extract the contour of the eye and region of pupil, the face candidate regions were extracted first. For the detection of face, YCbCr value range for normal Asian face color was defined by the pre-study of the Asian face images. The biggest skin color region was defined as a face candidate region and the eye regions were extracted by applying the contour and color feature analysis method to the upper 50% region of the face candidate region. The detected eye region was divided into three segments and the pupil pixels in each pupil segment were counted. The eye-gaze was determined into one of three directions, that is, left, center, and right, by the number of pupil pixels in three segments. In the experiments using 5,616 images of 20 test subjects, the eye-gaze was estimated with about 91 percent accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.163-169
• /
• 2020

The asynchronous bistatic sonar needs to estimate direct blast arrival time at a receiver to localize targets, and therefore the direct blast arrival time estimation error could be added to target localization error in comparison with synchronous system. Direct blast especially appears as several peaks at the matched filter output by multipath, thus we compared the first peak detection technique and the maximum peak detection technique of those peaks for direct blast arrival time estimation through sea trial data. The test was performed in a shallow sea with bistatic sonar made up of spatially separated source and line array sensors. Line array sensors obtained the target signal which is generated from the echo repeater. As a result, the first peak detection technique is superior to maximum peak detection technique in direct blast arrival time estimation error. The result of this analysis will be used for further research of target tracking in the asynchronous bistatic sonar.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.371-378
• /
• 1996

A prototype of expert system which can support the operation for the municipal waste water treatment plant located at Kyoung-Ki Do, Kwang-ju Kun was developed and tested. This system provides (i) tracking the cause of the problem, (ii) analysis, and (iii) solution Knowledge-base consists of about 100 production-rules for the biological wastewater process, such as bio-reactor and final clarifier. Rules were obtained from the analysis of the problems such as sludge bulking. The system provides stable process control and management and effectively helps inexperienced operators with advanced and standard technologies. Future works will focus to develop a statistical process control model and associate with expert system. The control model can process the operation data statistically; analyze the relationship between affecting factors and control variables; and provide optimum operation parameters.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2009

This paper presents a fundamental findings of the functional and structural performance of the porous asphalt concrete coated with MMA resin. To evaluate the structural performance, cantabro, wheel tracking, moisture sensitivity and indirect tensile fatigue tests are performed. The tests results show that the cantabro loss is reduced three times and fatigue resistance is significantly increased after the specimens are coated with MMA resin. However there are little changes in the rutting and moisture damage resistances before and after the coating. Air voids, permeability and BPT(British Pendulum Test) tests are conducted to study the functional performance. It is observed form the tests that the air voids and permeability are slightly decreased after the coating. However, the changes in the air voids and permeability are negligible. The skid resistance of the coated specimens is lower than reference specimens. However, the skid resistance is maintained beyond the level of the reference specimens when silica sands are chipped on top of the coated surface.