• 제목/요약/키워드: tracking test

Search Result 916, Processing Time 1.465 seconds

A Repeater-Assisted Indoor GPS Signal Acquisition and Tracking (중계기 도움방식의 실내 GPS 신호 획득 및 추적)

  • Song, Ha-Yeong;Im, Sung-Hyuck;Jee, Gyu-In
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.14 no.9
    • /
    • pp.963-968
    • /
    • 2008
  • A new method to deal with GPS indoor positioning by means of time synchronized switching GPS repeater has been developed by authors[1]. But the developed indoor positioning system has problems. Therefore, we proposed a method for indoor positioning using GNSS Repeater-Assisted. To solve the 3-dimensional user's position, the 4 or more retransmission antennas are needed in the previously proposed methods. If a GPS repeater periodically transmits the signal like as pseudollite, the information for assisting an acquisition and tracking can be informed to receiver. Then, the user position can be calculated using the induced weak signal. The advantage of the proposed algorithm is use of only 1 re-transmission antenna because the re-transmitted signal are not used for positioning but used for assisting an acquisition and tracking weak signals induced indoor. We analyze the propose algorithms through the experiment and performed the test of feasibility.

The Electrical Properties Dependent on the Filler in Silicone Composite Material for Power Distribution (옥외용 실리콘 고무 절연재료의 전기적 특성)

  • Kim, J.H.;Park, Y.G.;Kim, I.S.;Cho, H.G.;Kim, H.G.
    • Proceedings of the KIEE Conference
    • /
    • 1996.07c
    • /
    • pp.1597-1599
    • /
    • 1996
  • In this study, we investigated the electrical characteristics such as tracking resistance, dielectric constant, insulating resistance, and arc resistance, of silicone rubber for outdoor use, and, focused on the tracking resistance. In the Inclined Plane Test, two kind of the contamination solutions were used, and their phenomena were observed. The average leakage current and the tracking breakdown time decreased, and erosion rate increased, using anionic surfactant added contaminant solution. The dielectric constant and dissipation factor were increased with increasing temperature.

  • PDF

An Application of Wheel-Tracking-Machine on Moving Mass Test of Precast Concrete Decks (윤하중 실험기를 이용한 프리캐스트 바닥판의 이동질량실험)

  • Sung, Ikhyun
    • Journal of the Society of Disaster Information
    • /
    • v.7 no.3
    • /
    • pp.198-205
    • /
    • 2011
  • In this paper, an experimental study is performed in order to determine the effects of interaction between vehicle and structure. For this purpose a wheel tracking machine and an adequate precast concrete deck single span bridge are designed. Results presented in the paper show that interaction between vehicle and structure produce additional effects on dynamic behavior of structure including reversal and contrary behavior.

A ballistic lead-computation method to improve firing accuracy of army combat vehicles (전투차량의 사격통제 성능향상을 위한 탄도해 리드 계산 기법)

  • Jeoun, Young-Mi
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.10 no.2
    • /
    • pp.31-37
    • /
    • 2007
  • This paper presents a ballistic lead-computation method which utilizes automatic video tracking, tracking assistance and roll uncoupling. The method is able to improve the firing accuracy of army fighting vehicles such as main battle tanks. In the experiment, the efficiency of the proposed method is evaluated by an error analysis in real operating environment. The proposed method has been applied to the fire control system of a military vehicle and proved through the development test of the vehicle.

An Analysis of Instrumentation Radar's Beacon Tracking Performance Considering a Target Attitude (표적의 자세 변화를 고려한 계측 레이더의 비콘 추적 성능 분석)

  • Ryu, Chung-Ho;Ye, Sung-Hyuck;Hwang, Gyu-Hwan;Seo, Il-Hwan
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.13 no.4
    • /
    • pp.561-568
    • /
    • 2010
  • Instrumentation radar in a test range has an important role to measure target's TSPI(time, space, position, information). It is well known that it tracks a target stably using a beacon mode. But it may fail to track a target in a certain region using a beacon mode. In this paper, we modeled a simple missile shape similar to ATCMS with two beacon antenna and analyzed an antenna radiation pattern using MLFMM(Multi Level Fast Multipole Method) method. Using the analyzed result of the radiation pattern of the antenna and the attitude data of target, we simulated beacon tracking performance of an instrumentation radar. As a result of simulation, we showed that an instrumentation radar may lose the target because it tracks a area of the beacon antenna pattern.

Improvement of Tracking Property of Silicone Rubber Used for Out-door Polymer Insulator According to Aluminium Hydrate Filler (고분자애자용(高分子碍子用) 실리콘고무 재료(材料)의 $Al(OH)_3$에 의한 Tracking성(性) 향상(向上) 연구(硏究))

  • Hahn, K.M.;Kim, D.W.;Oh, M.W.;Kweon, H.S.;Kim, Y.S.
    • Proceedings of the KIEE Conference
    • /
    • 1993.07b
    • /
    • pp.1239-1241
    • /
    • 1993
  • This paper studies on the improvement of non-tracking property which is very important matter for developing polymer insulator. Non-Tracking property of silicon rubber used for polymer insulator was investigated by ASTM D 2303 according to Aluminium Hydrate filler. Furthermore other electrical and mechanical properties were estimated. The optimum amount of Aluminium Hydrate should be considered by following test results.

  • PDF

A Second-Order Particle Tracking Method

  • Lee, Seok;Lie, Heung-Jae;Song, Kyu-Min;Lim, Chong-Jeanne
    • Ocean Science Journal
    • /
    • v.40 no.4
    • /
    • pp.201-208
    • /
    • 2005
  • An accurate particle tracking method for a finite difference method model is developed using a constant acceleration method. Being assumed constant temporal and spatial gradients, the new method permits temporal-spatial variability of particle velocity. Test results in a solid rotating flow show that the new method has second-order accuracy. The performance of the new method is compared with that of other methods; the first-order Euler forward method, and the second-order Euler predictor-corrector method. The new method is the most efficient method among the three. It is more accurate and efficient than the other two.

Regulated Incremental Conductance (r-INC) MPPT Algorithm for Photovoltaic Systems

  • Wellawatta, Thusitha Randima;Choi, Sung-Jin
    • Journal of Power Electronics
    • /
    • v.19 no.6
    • /
    • pp.1544-1553
    • /
    • 2019
  • The efficiency of photovoltaic generation systems depends on the maximum power point tracking (MPPT) technique. Among the various schemes presented in the literature, the incremental conductance (INC) method is one of the most frequently used due to its superb tracking ability under changes in insolation and temperature. Generally, conventional INC algorithms implement a simple duty-cycle updating rule that is mainly found on the polarity of the peak-power evaluation function. However, this fails to maximize the performance in both steady-state and transient conditions. In order to overcome this limitation, a novel regulated INC (r-INC) method is proposed in this paper. Like the compensators in automatic control systems, this method applies a digital compensator to evaluate the INC function and improve the capability of power tracking. Precise modeling of a new MPPT system is also presented in the optimized design process. A 120W boost peak power tracker is utilized to obtain comparative test results and to confirm the superiority of the proposed method over existing techniques.

Human and Robot Tracking Using Histogram of Oriented Gradient Feature

  • Lee, Jeong-eom;Yi, Chong-ho;Kim, Dong-won
    • Journal of Platform Technology
    • /
    • v.6 no.4
    • /
    • pp.18-25
    • /
    • 2018
  • This paper describes a real-time human and robot tracking method in Intelligent Space with multi-camera networks. The proposed method detects candidates for humans and robots by using the histogram of oriented gradients (HOG) feature in an image. To classify humans and robots from the candidates in real time, we apply cascaded structure to constructing a strong classifier which consists of many weak classifiers as follows: a linear support vector machine (SVM) and a radial-basis function (RBF) SVM. By using the multiple view geometry, the method estimates the 3D position of humans and robots from their 2D coordinates on image coordinate system, and tracks their positions by using stochastic approach. To test the performance of the method, humans and robots are asked to move according to given rectangular and circular paths. Experimental results show that the proposed method is able to reduce the localization error and be good for a practical application of human-centered services in the Intelligent Space.

Scientific Approach to Fashion Websites Using Eye Trackers

  • Lee, Seunghee;Choi, Jung Won
    • Journal of Fashion Business
    • /
    • v.24 no.6
    • /
    • pp.63-79
    • /
    • 2020
  • This study analyze consumers' unconscious visual attention to color and images of internet shopping malls by using eye-tracking method. Twenty-nine participants, including 15 females and 14 males, participated. The average ages of the male and female participants were 27.3 years and 27.7 years, respectively. Ten images of five layouts (multi-composition images, single-model images, gender-composed images, videos, and moving banner images) of internet shopping malls were shown on an eye-tracker computer screen. Quantitative analyses of the eye-tracking responses were conducted. SPSS was used to analyze the descriptive characteristics and to conduct an independent-sample t-test, along with an ANOVA. The data analysis showed that the image area generally had the shortest time to first fixation (TFF), the longest duration of fixation (DOF), the highest number of fixations (NOF), and the highest numbers of revisits(NOR).Notably, visual attention towards female models was high among various images. The results can be used to improve credibility and design online shopping layout with a scientific evidence that helps consumers through their purchase decisions.