• Journal of Astronomy and Space Sciences
• /
• 제37권4호
• /
• pp.237-247
• /
• 2020

The ground tracking support is a critical factor for the navigation performance of spacecraft orbiting around the Moon. Because of the tracking limit of antennas, only a small number of facilities can support lunar missions. Therefore, case studies for various ground tracking support conditions are needed for lunar missions on the stage of preliminary mission analysis. This study analyzes the ground supporting condition effect on orbit determination (OD) of Korea Pathfinder Lunar Orbiter (KPLO) in the lunar orbit. For the assumption of ground support conditions, daily tracking frequency, cut-off angle for low elevation, tracking measurement accuracy, and tracking failure situations were considered. Two antennas of deep space network (DSN) and Korea Deep Space Antenna (KDSA) are utilized for various tracking conditions configuration. For the investigation of the daily tracking frequency effect, three cases (full support, DSN 4 pass/day and KDSA 4 pass/day, and DSN 2 pass/day and KDSA 2 pass/day) are prepared. For the elevation cut-off angle effect, two situations, which are 5 deg and 10 deg, are assumed. Three cases (0%, 30%, and 50% of degradation) were considered for the tracking measurement accuracy effect. Three cases such as no missing, 1-day KDSA missing, and 2-day KDSA missing are assumed for tracking failure effect. For OD, a sequential estimation algorithm was used, and for the OD performance evaluation, position uncertainty, position differences between true and estimated orbits, and orbit overlap precision according to various ground supporting conditions were investigated. Orbit prediction accuracy variations due to ground tracking conditions were also demonstrated. This study provides a guideline for selecting ground tracking support levels and preparing a backup plan for the KPLO lunar mission phase.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1411-1414
• /
• 2003

In this paper, vehicle tracking is implemented using parametric active contour. Extract objects from the background area is the essential step in vehicle tracking. We focus our algorithm on the situations such that the camera is fixed. However, if a simple and ordinary algorithm is adapted to achieve real-time processing, it produces much noise and the vehicle tracking results is poor. For this reason, in this paper, we propose a parametric active contour model algorithm to achieve better vehicle tracking. Experimental results show that the performance of the proposed algorithm is satisfactory.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.61.5-61
• /
• 2001

The laser tracking system(LTS) presents the most promising technique for dynamic position measurement of industrial robots. This system combine the advantage of high accuracy with a contactless measurement technique. It is the measurement system of position in three dimensions using distance data obtained by laser interferometer and real time angle by tracking mirror assembly. After measuring the tracking error of the beam projected on the center of retroreflector in robot end effector, this system tracks the end effector continuously by adjusting tracking mirror angle to minimize this error ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.128-128
• /
• 2000

An antenna tracking technique, referred to as "step track", is commonly used in communication applications. In this paper, an algorithm to improve the step-tracking technique for satellite tracking is proposed. We suggest a method by which the antenna scans the azimuth, detects the satellite signal without the position information, and points quickly to the direction receiving the signal of peak level. After reaching the peak level, the step-track system maintains enough signal levels to receive satellite broadcasting normally. Performance of the Tracking Algorithm proposed in this paper are verified with simulation.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2001년도 춘계학술대회 논문집
• /
• pp.219-224
• /
• 2001

This paper presents the development of a tracking algorithm for shipboard satellite antenna systems which can enhance the tracking performance. In order to overcome some drawbacks of the conventional step tracking algorithm, the proposed algorithm searches for the best tracking angles using gradient-based formulae and signal intensities measured according to a search pattern. The effectiveness of the proposed algorithm is demonstrated through simulation using real-world data.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.175-181
• /
• 1998

This paper describes realtime visual tracking system of moving object for three dimensional target using EKF(Extended Kalman Filter). We present a new realtime visual tracking using EKF algorithm and image prediction algorithm. We demonstrate the performance of these tracking algorithm through real experiment. The experimental results show the effectiveness of the EKF algorithm and image prediction algorithm for realtime tracking and estimated state value of filter, predicting the position of moving object to minimize an image processing area, and by reducing the effect by quantization noise of image.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.115-123
• /
• 2003

This paper presents analysis, design and simulation for the indirect field orientation control (IFOC) of induction machine drive system. The dynamic performance of the IFOC under nominal and detuned parameters of the induction machine is established. A conventional proportional plus integral-derivative (PI-D) two-degree-of-freedom controller (2DOFC) is designed and analysed for an ideal IFOC induction machine drive at nominal parameters with the desired dynamic response. Varying the induction machine parameters causes a degredation in the dynamic response for disturbance rejection and tracking performance with PI-D 2DOF speed controller. Therefore, conventional controllers can nut meet a wide range of speed tracking performance under parameter variations. To achieve high- dynamic performance, a proposed robust fuzzy logic controllers (RFLC) for d-axis rotor flux, d-q axis stator currents and rotor speed have been designed and analysed. These controllers provide robust tracking and disturbance rejection performance when detuning occurres and improve the dynamic behavior. The proposed REL controllers provide a fast and accurate dynamic response in tracking and disturbance rejection characteristics under parameter variations. Computer simulation results demonstrate the effectiveness of the proposed REL controllers and a robust performance is obtained fur IFOC induction machine drive system.

• 공학교육연구
• /
• 제17권1호
• /
• pp.3-11
• /
• 2014

The purpose of this study was to verity the effect of project method on the task performance ability in development of a solar-tracking-control-system of specialized high school. In order to carry out this study, 2 classes of technical high school in Jeonbuk are chosen as experimental and control groups. The experimental group was taught by project method and the control group was taught by traditional instruction. Project method was designed by 4 stages-selection of goal, planning, implementation and evaluation. According to these stages, experimental group's students carried out the project that developing solar tracking control system in solar generation. The results of this study are as follows; the project method was more effective than the traditional instruction in planning ability for task performance and implementation ability, subordinates of task performance ability. However, information gathering ability and evaluation ability on task performance, others in subordinates, it is not clear that the project method is more effective.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.355-358
• /
• 2006

An underwater mooing target position tracking system using image tracking system of CPMC is developed to use in a test basin. Generally the performance tests of Autonomous Underwater Vehicles(AUVs) are conducted in the sea. Some efforts to perform the test in a test basin are exist, because the real sea tests need much time and manpower. And also the real sea tests are high cost. There is a restriction to acquire the position of AUVs using sonar sensor system in the test tank, because many sound reflecters are exist in a test basin. In this paper a position tracking system for underwater mooing target developed to break though this restriction. A Tank-test is conducted to examine the performance of the position tracking system.

• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.430-435
• /
• 2007

This paper describes the results of electrical characteristics assessment for organic insulations of polyethylene(PE) series insulations and acrylonitrile butadiene styrene copolymer(ABS). In the experiment, 4 kinds of specimens by composition density were tested in relative permittivity, specific resistance and tracking duration. A WinDETA system and a tracking test set manufactured for this assessment were used to measure the dielectric parameters and tracking duration, respectively. In measuring the tracking duration, the time from testing voltage application to testing circuit breaking due to the tracking current was measured. As a result, dielectric dispersion was observed in measuring the relative permittivity of ABS. It was confirmed that the relative permittivity decreased with the density of the PE series insulations and it depends rather on the temperature than frequency. In most specimens, specific resistance exponentially decreased with frequency and the result for each specimen was almost similar. By the way, in the tracking test, all the PE series insulations showed more excellent performance than ABS and especially in the case of HDPE, its tracking withstand performance was the best.