• Smart Structures and Systems
• /
• v.4 no.6
• /
• pp.795-807
• /
• 2008

A challenging problem in structural damage detection based on vibration data is the requirement of a large number of sensors and the numerical difficulty in obtaining reasonably accurate results when the system is large. To address this issue, the substructure identification approach may be used. Due to practical limitations, the response data are not available at all degrees of freedom of the structure and the external excitations may not be measured (or available). In this paper, an adaptive damage tracking technique, referred to as the sequential nonlinear least-square estimation with unknown inputs and unknown outputs (SNLSE-UI-UO) and the sub-structure approach are used to identify damages at critical locations (hot spots) of the complex structure. In our approach, only a limited number of response data are needed and the external excitations may not be measured, thus significantly reducing the number of sensors required and the corresponding computational efforts. The accuracy of the proposed approach is illustrated using a long-span truss with finite-element formulation and an 8-story nonlinear base-isolated building. Simulation results demonstrate that the proposed approach is capable of tracking the local structural damages without the global information of the entire structure, and it is suitable for local structural health monitoring.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.3
• /
• pp.19-23
• /
• 2005

To minimize the weld defect in manufacturing of the welded tube by using $CO_2$ laser, the monitoring of the welding quality and the seam tracking along the butt-joint lengthwise to the tube axis are studied. The longitudinal butt-joint is shaped from $60kgf/mm^2$ grade steel sheet by 2 roll bending method, and welded by the $CO_2$ laser welding system equipped with the seam tracker and plasma sensor. The laser welded tube has the thickness of 1.5mm, diameter of 105.4mm and length of 2000mm. The precise positioning of the laser beam on the butt-joint to be assembled is obtained within $200{\mu}m$ by the laser vision sensor. The artificial defects in the butt-joint are well observed by the signal of plasma intensity measured from the plasma sensor of UV wavelength range within 400nm. The developed $CO_2$ laser tube welding system has the function of the precision seam tracking and the real-time monitoring of the welding quality. In conclusion, the laser welded tube can be used for manufacturing of automobile chassis and components after hydro-forming.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.209-216
• /
• 2006

A study has been conducted for an optimal processing and an apparatus for manufacturing a laser welded tube for one-body formed bumper beam. The tube dimensions used in calculation were the thickness of 1.4 mm, the diameter of 105.4 mm and the length of 2000 mm. The tube was formed of a cold rolled high strength steel plate(tensile strength of 600 MPa). The two-roll bending method was the optimal tube forming process in comparison with the UO-bending method, the bending method on the press brake, the multi-step continuous roll-forming method and the 3-roll bending method. Monitoring of the welding quality was conducted and the seam tracking along the butt-joint lengthwise to the tube axis was also examined. The longitudinal butt-joint was welded by using a $CO_2$ laser welding machine equipped with a seam tracker and a plasma sensor. The $CO_2$ laser tube welding machine could be used for precise seam tracking and real-time monitoring of the welding quality. As a result, the developed laser welded tube could be used for a one-body formed automobile bumper beam.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.136-144
• /
• 2004

Optimal process and system to produce the laser welded tube for one body formed bumper beam are studied. The calculated size of tube is a thickness of 1.4mm, diameter of 105.4mm and length of 2000mm. The tube is shaped from a cold rolled high strength steel sheet(tensile strength: 60kgf/$\textrm{mm}^2$ grade). Two roll bending method is the optimal tube shaping process compared to UO-bending, bending on press brake, multi-step continuous roll forming and 3 roll bending methods. Weld quality monitoring and seam tracking along the butt-joint lengthwise to the tube axis are also studied. The longitudinal butt-joint is welded by the $CO_2$ laser welding system equipped with a seam tracker and plasma sensor. The constructed $CO_2$laser tube welding system can be used for the precision seam tracking and the real-time monitoring of weld quality. Finally, the obtained laser welded tube can be used for one-body formed automobile bumper beam.

• The Journal of Korea Robotics Society
• /
• v.4 no.2
• /
• pp.130-138
• /
• 2009

Recently, people tracking technology is being required to various area including security application. This paper suggests a method to track people with multiple laser scanners to detect the waist part of human. Multi-target model and Kalman filter based estimation are employed to track the human movement. The proposed method is applied to a novel system to monitor the entrance area and to filter out the trespasser to pass through the door without identification. Experiments for various cases are performed to verify the usefulness of the developed system.

• Journal of Sensor Science and Technology
• /
• v.24 no.1
• /
• pp.54-61
• /
• 2015

In recent years, there has been increasing use of automatic surveillance and monitoring systems based on vision sensors. Humans are often the most important target in the systems, but processing human images is difficult due to the small sizes and flexible motions. Particularly, occlusion among pedestrians in camera images brings practical problems. In this paper, we propose a novel method to separate image regions of occluded pedestrians. A camera equipped with a wide angle lens is attached to the ceiling of a building corridor for sensing pedestrians with a wide field of view. The output images of the camera are processed for the human detection, tracking, identification, distortion correction, and occlusion handling. We resolve the occlusion problem adaptively depending on the angles and positions of their heads. Experimental results showed that the proposed method is more efficient and accurate compared with existing methods.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.65-72
• /
• 2014

To improve the productivity of manufacturing company, the analysis of loss in shop floor has to be conducted and validated. This paper introduces the downtime tracking module using the pre-developed shop floor information acquisition system. To collect the downtime, it utilized shop floor monitoring information, user-registered downtime event, equipment diagnosis algorithm and operator's input. Also, it provided the user interface for the analysis of downtime. From the results of a pilot study, the usability of developed system was validated.

• ALGAE
• /
• v.34 no.4
• /
• pp.315-326
• /
• 2019

Northeastward drifts of massive Sargassum patches were observed in the East China Sea (ECS) and Yellow Sea (YS) by the Geostationary Ocean Color Imager (GOCI) in May 2017. Coverage of the brown macroalgae patches was the largest ever recorded in the ECS and YS. Three-dimensional circulation modeling and Lagrangian particle tracking simulations were conducted to reproduce drifting trajectories of the macroalgae patches. The trajectories of the macroalgae patches were controlled by winds as well as surface currents. A windage (leeway) factor of 1% was chosen based on sensitivity simulations. Southerly winds in May 2017 contributed to farther northward intrusion of the brown macroalgae into the YS. Although satellite observation and numerical modeling have their own limitations and associated uncertainties, the two methods can be combined to find the best estimate of Sargassum patch trajectories. When satellites were unable to capture all patches because of clouds and sea fog in the ECS and YS, the Lagrangian particle tracking model helped to track and restore the missing patches in satellite images. This study suggests that satellite monitoring and numerical modeling are complementary to ensure accurate tracking of macroalgae patches in the ECS and YS.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_1
• /
• pp.249-256
• /
• 2024

Traditional methods for monitoring targets rely heavily on probabilistic data association (PDA) or Kalman filtering. However, achieving optimal performance in a densely congested tracking environment proves challenging due to factors such as the complexities of measurement, mathematical simplification, and combined target detection for the tracking association problem. This article analyzes a target tracking problem through the lens of fuzzy logic theory, identifies the fuzzy rules that a fuzzy tracker employs, and designs the tracker utilizing fuzzy rules and Kalman filtering.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.52-58
• /
• 2002

This Paper describes the method of real time object tracking using variable searching window. Monitoring systems require real time object tracking in video, efficiencies depend on environment of monitoring target. To get a position of object using a difference between background image and input image, the system extracts contour and centroid of the object. This method track motion of object using variable searching window from size and position of object. The background imgaes and camera are limited as fixed environment. The test result of proposed method Is 17-23FPS, this shows more fast process speed than average(10-14FPS) of existing object tracking method.