• 제목/요약/키워드: tow

검색결과 658건 처리시간 0.025초

The effect of vehicle velocity and drift angle on through-body AUV tunnel thruster performance

  • Saunders, Aaron;Nahon, Meyer
    • Ocean Systems Engineering
    • /
    • 제1권4호
    • /
    • pp.297-315
    • /
    • 2011
  • New applications of streamlined Autonomous Underwater Vehicles require an AUV capable of completing missions with both high-speed straight-line runs and slow maneuvers or station keeping tasks. At low, or zero, forward speeds, the AUV's control surfaces become ineffective. To improve an AUV's low speed maneuverability, while maintaining a low drag profile, through-body tunnel thrusters have become a popular addition to modern AUV systems. The effect of forward vehicle motion and sideslip on these types of thrusters is not well understood. In order to characterize these effects and to adapt existing tunnel thruster models to include them, an experimental system was constructed. This system includes a transverse tunnel thruster mounted in a streamlined AUV. A 6-axis load cell mounted internally was used to measure the thrust directly. The AUV was mounted in Memorial University of Newfoundland's tow tank, and several tests were run to characterize the effect of vehicle motion on the transient and steady state thruster performance. Finally, a thruster model was modified to include these effects.

미래 배전계통에서의 자동재폐로 동작을 고려한 초전도한류시스템에 관한 연구 (A study on SFCL System for Korean future distribution power system application considering auto reclosing actions of protection system)

  • 이승렬;김종율;윤재영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.344-346
    • /
    • 2005
  • The recovery time of developing SFCL(Superconducting Fault Current Limiter) has an uncertainty. In general, the recovery time is estimated at 1 sec and more, even though the progress of SFCL technology is considered. However, auto reclosing time of circuit breaker is 0.5 sec in Korean distribution power system. It is impossible to apply only one SFCL to power system because the recovery time is over the reclosing time of protection system. This study proposes a new SFCL system for distribution power system application. The proposed systems consider auto reclosing action for the protection in practical power system and consist of tow parallel SFCLs.

  • PDF

R-404A를 사용한 용접형 판형 열교환기의 압력강하 및 응축 열전달특성에 관한 연구 (Study on Pressure Drop and Condensation Heat Transfer Characteristics of R-404A in Brazed Plate Heat Exchanger)

  • 권오갑;전창덕;강종식;이진호
    • 설비공학논문집
    • /
    • 제13권3호
    • /
    • pp.174-183
    • /
    • 2001
  • Experimental study has been carried out on the characteristics of pressure drop and heat transfer of brazed plate heat exchangers using R-404A. Data are presented for the following range of variables: the mass flux ($20~80kg/m^2s$), chevron angle($20^{circ}C,\;35^{circ}C,\;45^{circ}C$) and inlet pressure of he refrigerant (1.4 and 1.6 MPa). for both subcooled and tow-phase flow, as chevron angle increases, pressure drop and heat transfer coefficient decrease. Condensation hat transfer coefficient and pressure drop was compared with the previously proposed correlations. Among them, Traviss correlation agreed with experimental results within -35~82% for heat transfer coefficient and -73~93% for pressure drop.

  • PDF

아파트주택에 있어서 실내공기청정기에 의한 환기의 수치해석 (A Numerical Analysis on Forced Ventilation using Indoor Air Cleaner in an Apartment House)

  • 고재윤;김일겸;최병훈;임장순
    • 설비공학논문집
    • /
    • 제13권3호
    • /
    • pp.217-223
    • /
    • 2001
  • There exist a number of approaches which can evaluate ventilation and indoor air quality. The measurement and analysis of indoor carbon dioxide concentrations can be useful for evaluating indoor air quality and ventilation. This paper describes a numerical analysis of carbon dioxide concentrations for evaluating indoor air quality and ventilation and the factors the need to be considered in their use. The conditions of this numerical analysis are tow types of positions and inlet velocities of ventilation system in a two-dimensional model of an apartment house. The simulation results could be used as a base data for further analysis for ventilation design of other industrial processes producing a proper ventilation system for a healthier and more comfortable environment in a building.

  • PDF

정현적인 온도 분포를 갖는 두 수평 평판 사이에서의 작은 Rayleigh 수 열 대류 (Low Rayleigh Number Thermal Convection Between Two Horizontal Plates with Sinusoidal Temperature Distributions)

  • 유주식;김용진
    • 설비공학논문집
    • /
    • 제13권3호
    • /
    • pp.145-152
    • /
    • 2001
  • Low Rayleigh number thermal convection in a fluid layer confined between two-infinite horizontal walls kept at spatially sinusoidal temperature distributions, T_L=T_m+\Delta T\sin \kappax,\;T_U=T_m+\Delta T\sin(\kappax-\beta)$, is theoretically investigated by a regular perturbation expansion method. For small wave numbers, an upright cell is formed between the two walls at $\beta$=0. The cell is tilted, as the phase difference increases, and a flow with tow counter-rotating eddies occurs at $\beta=\pi$. when the wave number is large, isolated eddies are formed near the lower and upper walls, for all the phase differences. There exists a wave number at which maximum heat transfer rate at the walls occurs, at each of the phase differences. And the wave number increases with increase of the phase difference. for a fixed wave number, the heat transfer rate decrease with increase of the phase difference.

  • PDF

Estimation of Reliability for a Tow-Component Parallel Stress-Strength System

  • Hong, Yeon-Woong
    • Communications for Statistical Applications and Methods
    • /
    • 제6권1호
    • /
    • pp.89-98
    • /
    • 1999
  • In this paper we estimate the reliability of parallel system with two components. We assume that the strengths of these components follow bivariate exponential(BVE) models proposed by Marshall-Olkin(1967) Block-Basu(1974) Freund(1961) and Proschan-Sullo(1974) These two components are subjected to a normally distributed random stress which is independent of the strength of the components. If the strengths ($\textit{X}_1$, $\textit{X}_2$) are subjected to a stress($\textit{Y}$) then the system reliability ($\textit{R}$) is given by $\textit{R}=\textit{P}[\textit{Y} We present some numerical results and compare the bias and the mean square error of the maximum likelihood estimator and proposed estimators for a moderate sized samples when $(\textit{X}_1, \textit{X}_2)$ follow BVE of Marshall-Olkin.

  • PDF

상묘포지에 대한 Cylon 및 Chloropiclin 토양 소독이 상묘생장에 미치는 영향 (Soil Disinfection Effect with Cylon and Chloropiclin on the Mulberry (Morus alba L.) Graftage Growth)

  • 박광준;김영택;최영철
    • 한국잠사곤충학회지
    • /
    • 제30권2호
    • /
    • pp.84-87
    • /
    • 1988
  • Cylon과 Chloropiclin을 접목원묘를 이식하기 4주전에 묘포지 토양에 각각 30ml/$m^2$씩 관주 후피복하여 훈증소독하고 묘질을 조사한 결과는 다음과 같다. 1. Cylon 또는 Chloropiclin 소독구는 상묘의 묘경과 묘장을 뚜렷하게 증대시켰으며 잡초발생억제 효과도 현저하였다. 2. 양소독구 간에는 Chloropiclin 소독구가 Cylon 소독구 보다 약간 우수한 경향을 나타내었으나 유의차는 인정되지 않았다.

  • PDF

낙동강 하구 사주 식생의 변이에 관한 연구 II. 식생형성과 종간상관 (Studies on Plant Succession of Sand Bars at the Nagdong River Estuary)

  • 문병태
    • Journal of Plant Biology
    • /
    • 제28권3호
    • /
    • pp.191-198
    • /
    • 1985
  • The processes of vegetation development and interspecific association were studied as a part of a successional study in the sand bars at the Nadgdong River estuary in Korea. The major pioneer plant species in the sand bars were Salsola komarovi, Carex pumila and Cynodon dactylon. In embryonic sand bars, Namusitdeung and Galmaegideung, the processes of vegetation development after colonization by pioneer species were closely interdependent with the development of the sand dune. The vegetation types of embryonic sand bars were divided into two groups: sand dune plants, and annual and perennial forbs. Those of old sand bars, Baeghapdeung and Ogryudeung, were also divided into tow groups: sand dune plants, and salt marsh plants. The results of interspecific association coincided well with the actual distribution of plant communities in the sand bars. The degree of vegetation development in each sand bar agreed with the order of successional stage observed in this study area.

  • PDF

The Impact of Preventive Environmental Programs Implementatio on Sales growth, Manufacturing and Environmental Performanc the Chemical Industry of the USA

  • Yang, Jong-gon;Chang, Dae-sung;Park, Ju-Young
    • 한국컴퓨터정보학회논문지
    • /
    • 제7권4호
    • /
    • pp.220-234
    • /
    • 2002
  • This study examined the impact of preventive environmental management practices on sales growth, manufacturing and environmental performance of the US chemical manufacturing companies. In order to investigate the impact, this study examined the relationship between the degree of preventive environmental programs and sales growth, manufacturing and environmental performances. Using a cross-sectional research design to test three hypotheses. a survey questionnaire was mailed to chemical companies in the USA. To investigate the relationship between the degree of Preventive environmental programs and sales growth, manufacturing and environmental performances. t-tests were used. According to the results of t-tests the higher preventive implementation programs achieved better manufacturing and environmental performances than lower preventive or reactive strategies. But there was no difference in sales growth between tow groups.

  • PDF

유리의 Flaking 생성기구에 관한 기구 (A Study on the Flaking Mechanism of Glass)

  • 김명석;심명재;김정환;이기강
    • 한국결정학회지
    • /
    • 제11권4호
    • /
    • pp.224-230
    • /
    • 2000
  • We have been investigated the flaking mechanism of the soda-line glass. The pH of aqueous solution approached to 10 and increased with reaction time by ion exchange reaction between Na/sup +/ ion of glass and H/sup +/ ion of aqueous solution under the conditions of below pH 9 of start solution. The relationship between the pH of solution and reaction time shows logarithm. Total dissolution reaction of glass components by OH/sup -/ ion in aqueous seems to be dominant after the pH solution reached to 10 and the dissolution rate linearly increased with reaction time. The above tow reactions are simultaneously occurred. The dissolved Ca/sup 2+/ ions are reprecipitated on the glass surface to Ca-compound. The flakes are formed by the separation of leached layer of glass due to the different thermal expansion coefficient.

  • PDF