• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.4
• /
• pp.232-238
• /
• 2005

This paper describes reproduction, population structure, growth and size at sexual maturity of a deep-water mud shrimp (Solenocera melantho) in the adjacent waters of Geomun Island, Korea. The shrimp was caught by a beam trawl from November 1998 to December 1999. Spawning period was estimated by gonadosomatic index to be from August to early November with a peak in October to early November. Female shrimps were $12\%$ matured at 16 mm in carapace length, $33\%$ matured at 18 mm and $75\%$ matured at 22 mm. The size at $50\%$ maturity for female was estimated to be 20.65 mm in carapace length. Breeding season was estimated to be from August to early November with a peak in October to early November. The size at $50\%$ inseminated was 19.81 mm CL. The fecundity was 87,500-405,200 and related exponentially to carapace length and total weight. This species survived between 25 and 26 months. The maximum carapace length of females and males were 48 mm and 34 mm respectively. Sex ratio was $51.3\%$, and the females were preponderant. Growth was estimated by modified von Bertalanffy growth function incorporating seasonal variation in growth in both years females (K=1.019/yr and $L_{\infty}$=51.731 mm CL) grew faster, reaching a larger size at a given age than males (K=1.848/yr, and $L_{\infty}$=27.499 mm CL). This is indicated by differences in growth performance indices $(\varphi')$ between females (3.291) and males (3.145).

• Journal of Forest and Environmental Science
• /
• v.34 no.2
• /
• pp.101-107
• /
• 2018

We identified the main impacts, drivers, and restoration projects for Atlantic Forest in Northwest of the Rio Grande do Sul State, Brazil. The objective was to analyze the quantity, distribution, and causes of the environmental crimes in 2000-2014. To verify differences between degraded and restored areas, we performed a t-test; ANOVA for the municipalities with more quantity of crimes, simple linear regression analysis for the relationship between sizes of degraded areas and quantity of seedlings planted, and Principal Component Analysis (PCA) for environmental damages categories and population of the municipalities. The main environmental damages found were deforestation outside permanent preservation area (20%) and those related to Permanent Preservation Area (37%). Environmental crimes in these areas fall into two categories: native and exotic vegetation removal (17%), and impediment to natural regeneration (20%). The average size of the degraded areas was $5,359{\pm}526m^2$, while for restored areas was $3,337{\pm}255m^2$. The sizes of the degraded fragments were similar among the five municipalities with the higher number of environmental crimes (ANOVA: p>0.05, F=1.24; df=241). The number of seedlings planted was positively related to the sizes of the degraded fragments (p<0.001, $R^2=0.53$). Segregation between the less and the most populous municipalities was found with the PCA analysis along PC1 (51.7%), while PC2 represented 19.2% of the total variation. The most populous municipalities showed the highest number of environmental crimes, and the majority of degraded areas were recovered by planting native seedlings. Atlantic Forest fragments need to be recognized and preserved as an ecosystem with a unique ecological function by the population and public administration.

• Korean Journal of Ichthyology
• /
• v.24 no.4
• /
• pp.263-271
• /
• 2012

A female preference is a potentially complex function relating variation in multiple male traits with her probability of accepting the most optimal individuals as a mate. If mate preference is dominantly driven by additive fitness benefits, different females tend to be congruent in the decision of choice, whereas females will not necessarily share their mate preferences if non-additive benefits more strongly operate. Here, a sequential blocked design ($4{\times}4$) was applied to experimentally assess the relative contribution of additive and non-additive components to the female mate preference with Korean rosy bitterling, Rhodeus uyekii. In a total of 48 single stimulus presentations, behavioral elements of courtship activities were analyzed to derive the 'index of female preference'. Females showed a clear preference for males with more elaborate carotenoid colors, but mated randomly with respect to male body size and other color patterns. However, they were not individually consistent in their choice of mates, suggesting that non-additive components probably contribute to the evolution of female preference.

• Journal of Korean Academy of Nursing Administration
• /
• v.14 no.3
• /
• pp.229-240
• /
• 2008

Purpose: To develop the patient classification system based on the resource utilization for reimbursement of long-term care hospitals in Korea. Method: Health Insurance Review & Assessment Service (HIRA) conducted a survey in July 2006 that included 2,899 patients from 35 long-term care hospitals. To calculate resource utilization, we measured care time of direct care staff (physicians, nursing personnel, physical and occupational therapists, social workers). The survey of patient characteristics included ADL, cognitive and behavioral status, diseases and treatments. Major category criteria was developed by modified delphi method from 9 experts. Each category was divided into 2-3 groups by ADL using tree regression. Relative resource use was expressed as a case mix index (CMI) calculated as a proportion of mean resource use. Result: This patient classification system composed of 6 major categories (ultra high medical care, high medical care, medium medical care, behavioral problem, impaired cognition and reduced physical function) and 11 subgroups by ADL score. The differences of CMI between groups were statistically significant (p<.0001). Homogeneity of groups was examined by total coefficient of variation (CV) of CMI. The range of CV was 29.68-40.77%. Conclusions: This patient classification system is feasible for reimbursement of long-term care hospitals.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.116-116
• /
• 2017

Low-temperature is one of the environmental stress factors that affect plant growth and development and consequently limit crop productivity. The control of seed germination under low-temperature is organized by many genes which are called quantitative trait loci (QTLs). High germination rate for low-temperature is an important factor of growing rice. Previously, we identified a major QTL controlling low-temperature germinability in rice using 96 introgression lines (ILs) derived from a cross between Oryza rufipogon (Rufi) and the Korean japonica cultivar, 'Hwaseongbyeo (HS)'. A $BC_3F_7$ line (TR5) showed better low-temperature germinability than its recurrent parent. TR5 was crossed with HS to develop a segregating F2:3 populations for the target QTL. Six SSR markers polymorphic between HS and Rufi were used to screen and fine map the qLTG1. The qLTG1 on chromosome 1, which accounted for 55.5% of the total phenotypic variation, confirmed that Rufi allele enhanced the low-temperature germinability. Intervals between markers CRM16 and CRM15, four candidate genes were identified. The identified candidate genes, which are encoded by a protein of unknown function, showed their direct involvement on seed germination at low-temperature. To identify genes targeted by qLTG1, we investigated the expression profiles of these candidate genes and germination behavior of qLTG1 under different stress conditions and compared to HS, Rufi, and TR5 at $13{\pm}2^{\circ}C$ for 3 days after incubation. Furthermore, transgenic rice plants will also be developed to conduct a detailed investigation on low-temperature germinability. Hence, the QTL for low-temperature germinability would be useful in rice breeding programs especially in the development of lines possessing low-temperature germinability.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.2
• /
• pp.193-200
• /
• 2011

A BOR(Boil-Off Rate) prediction model for the NO96 membrane-type LNG insulation containment filled with superlite powders during laden voyage is presented in this paper. Finite element model for the unsteady-state heat transfer analysis is constructed by considering the air and water conditions and by employing the homogenization method to simplify the complex insulation material composition. BOR is evaluated in terms of the total amount of heat invaded into LNGCC and its variation to the major variables is investigated by the parametric heat transfer analysis. Based upon the parametric results, a BOR prediction model which is in function of the LNG tank size, the insulation layer thickness and the powder thermal conductivity is derived. Through the verification experiment, the accuracy of the derived prediction model is justified such that the maximum relative difference is less than 1% when compared with the direct numerical estimation using the FEM analysis.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.100-114
• /
• 2015

This paper deploys optimization techniques to obtain the optimum hull form of KSUEZMAX at the conditions of full-load draft and design speed. The processes have been carried out using a RaPID-HOP program. The bow and the stern hull-forms are optimized separately without altering neither, and the resulting versions of the two are then combined. Objective functions are the minimum values of wave-making and viscous pressure resistance coefficients for the bow and stern. Parametric modification functions for the bow hull-form variation are SAC shape, section shape (U-V type, DLWL type), bulb shape (bulb height and size); and those for the stern are SAC and section shape (U-V type, DLWL type). WAVIS version 1.3 code is used for the potential and the viscous-flow solver. Prior to the optimization, a parametric study has been conducted to observe the effects of design parameters on the objective functions. SQP has been applied for the optimization algorithm. The model tests have been conducted at a towing tank to evaluate the resistance performance of the optimized hull-form. It has been noted that the optimized hull-form brings 2.4% and 6.8% reduction in total and residual resistance coefficients compared to those of the original hull-form. The propulsive efficiency increases by 2.0% and the delivered power is reduced 3.7%, whereas the propeller rotating speed increases slightly by 0.41 rpm.

• Environmental Analysis Health and Toxicology
• /
• v.21 no.1 s.52
• /
• pp.57-69
• /
• 2006

Lately human exposure to fine particles smaller than $2.5{\mu}m$ in aerodynamic diameter ($PM_{2.5}$) has become a great concern in Korea due to their possible cause of elevated mortality, lung function decrements, and more frequent hospital admissions for asthma. This study was conducted to investigate seasonal variations of human exposure to residential $PM_{2.5}$ and particle-associated polycyclic aromatic hydrocarbons (PAHs). Ten homes in Chuncheon, Korea were visited for continuous 72 hour sampling of $PM_{2.5}$ in the living rooms using a MiniVol Portable Sampler from December 22, 2002 to November 3, 2003. During the same period, outdoor $PM_{2.5}$ samples were collected on the top of the Natural Sciences Building of Kangwon National University which is located in the middle of the ten households. Samples were analyzed for $PM_{2.5}$ mass concentrations and six selected PAHs. In two smoking homes, the highest $PM_{2.5}$ concentrations were measured ranging from 51.1 to 69.7 {\mu}g/m^3$ on average in all seasons, indicating smoking is a very important contributor to the elevation of indoor particle concentrations. Seasonal comparison showed that indoor particle concentrations were higher than outdoor ones except winter. Total PAH concentrations in smoking homes were highest in winter among the seasons primarily due to low ventilation rate, followed by the outdoor site and nonsmoking homes. BaP toxic equivalents (TEQs) were calculated for five PAHs. The TEQ for smoking homes in winter was highest followed by the outdoor site in winter. It is concluded that smoking and ventilation rate are two important contributors to the elevation of indoor $PM_{2.5}$ and PAH concentrations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1099-1107
• /
• 1998

In this study, the microstructure and electric conductivity of 5mol% $Gd_2O_3$-5mol% $Y_2O_3-ZrO_2$ system(5G5YZ) with a variation of sintering time at $1600^{\circ}C$ were investigated. By the result of TEM analysis of 5G5YZ sintered for 12h, a microcrack was observed near grain boundary. The change of the sintering time did not affect the lattice conductivity, but the grain boundary contribution was varied with the sintering time. The grain boundary conductivity of the sample sintered for 1h showed the highest value. Furthermore, the activation energy of the total conductivity was independent upon the sintering time and showed approximately 1.01eV. The highest conductivity measured at $1000^{\circ}C$ was 0.0197S/cm with the sample sintered for 1h. Comparing to 0h’s, the thickness ration of grain boundary as a function of sintering time were 0.88, 1.11 and 1.29 for 1h, 5h and 12h, respectively. In case of the sample sintered for 1h, the thickness of the grain boundary showed the lowest value. The increase of the sintering time over 1h made the decrease of the electric conductivity as well as the increase of the grain growth and the thickness of the grain boundary. As a result, it seemed that the proper sintering time for 5G5YZ composition was 1h.

• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.41-47
• /
• 2013

PURPOSES : The purpose of this study is about noise which is generated from roads and is consist of irregular frequency variation from low frequency to various band. The existing methods of noise reduction are sound barrier that uses insulation material and absorbing material or have applied passive technology of noise reduction by devices. The total frequency band is needed to apply active noise control. METHODS : In this study applies to the field of road traffic environment, signal processing controller and various analog signal input/output, the amplifier module is based on parallel-core embedded processor designed. DSP performs the control algorithm of the road traffic noise. Noise sources in the open space performance of evaluation were applied. In this study, controller of active signal processor was designed based on the module of audio input/output and main controller of embedded process. The controller of active signal processor operates noise reduction algorithm and performance tests of noise reduction in inside and outside environment were executed. RESULTS : The signal processing controller with OMAP-L137 parallel-core processors as the center, DSP processors in the active control operations dealt with quickly. To maximize the operation speed of an object and ARM processor is external function keys and display for functions and evaluating the performance management system was designed for the purpose of the interface. Therefore the reduction of road traffic noise has established an electronic controller-based noise reduction. CONCLUSIONS : It is shown that noise reduction is effective in the case of pour tonal sound and complex tonal sound below 500Hz by appling to Fx-LMS.