• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.375-380
• /
• 2003

This study was carried out 1) to investigate the pH effect on solubilization of phenanthrene by biosurfactant in aqueous system and 2) to evaluate the pH effect on the biodegradation rate of phenanthrene in the presence and the absence of the biosurfactant by phenanthrene degraders. Tween 80, which is a chemically synthesized surfactant, showed greater solubilizing capacity than rhamnolipid. The solubilization capacity can be expressed as a MSR(molar solubilization ratio=moles of organic compounds solubilized per mole of surfactant). The calculated MSR of Tween 80 and rhamnolipid were 0.1449 and 0.0425 respectively. The kinetic study of phenanthrene solubilization by rhamnolipid showed that solubilization mechanism could reach equilibrium within 24 hours. Addition of 240 ppm rhamnolipid solution, which concentration is 4.3 times of Critical Micelle Concentration(CMC), caused 9 times solubility enhancement compared to water solubility. The highest solubilities were detected around a pH range of 4.5-5.5. Changes in apparent solubility with the changes in pH are possibly related to the fact that the rhamnolipid, an anionic surfactant, can form different structures depending on the pH. Two biodegradation experiments were performed in the absence and the presence of rhamnolipid, with the cell growth investigated using a spread plate method. The specific growth rates at pH 6 and 7 were higher than at the other pH, and the HPLC analysis data, for the total phenanthrene loss, confirmed the trends in the $\mu$(specific growth rate) values. In presence of rhamnolipid, maximum $\mu$ values shifted from around pH 5 which showed maximum enhancement of solubility in the abiotic experiment, compared to the $\mu$ values obtained without the biosurfactant. In this study, the increase in the observed specific grow rate(1.44 times) was not as high as the increase in solubilization(5 times). This was supported by the fact all the solubilized phenanthrene is not bioavailable to microorganisms.

• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.619-627
• /
• 2016

The purpose of this study is to investigate the effect of CT contrast agent and MRI contrast agent on the area dose in the body when using automatic exposure control system in general radiography. After making rectangular holes in the center of the abdominal thickness paraffin phantom, CT contrast agent and MRI contrast agent were respectively diluted with physiological saline solution for contrast medium dilution ratio of 10:0, 9:1, 8:2, 7:3, 6:4, 5:5, 4:6, 3:7, 2:8, 1:9, 0:10%. Each experiment was set to 78 kVp, 320 mA, which is the proper condition for KUB photography, and thereafter a total of 30 inspections were made for each dilution ratio using an automatic exposure control device, and the area dose corresponding to the dilution ratio of each contrast agent, Average comparison and correlation analysis were performed on the exposure index. As a result, the CT contrast agent and the MRI contrast agent appeared different in area dose according to the dilution ratio(p<0.05), and as the dilution ratio increased, the area dose increased for CT contrast agent and MRI contrast agent(P<0.05). In each test, the exposure index showed the manufacturer's recommendation of 200-800 EI value, and the exposure index and area dose increased as the area dose increased(p<0.05). In conclusion, CT contrast agent and MRI contrast agent confirmed to increase the area dose by general imaging test using all automatic exposure control device. Therefore, it is considered that it is necessary to perform it after the contrast medium has been excreted sufficiently when using usual imaging test after using the contrast agent in CT and MRI examination.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2018

This study investigated the influence of starch extraction (ST-EX) solutions on the extraction yield and characteristics of Chinese yam (CY) starches from domestic Dioscorea batatas. Ascorbic acid (VitC), $Na_2S_2O_3$, $NaHCO_3$, and $Na_2CO_3$ were used as ST-EX solutions (0.4%, w/v). The extracted CY starches were examined for ST-EX yield, chemical composition, size distribution, X-ray diffraction, solubility, swelling power, gelatinization, and pasting viscosity. The highest ST-EX yield was obtained from $NaHCO_3$, followed by VitC. Lower protein content, relative crystallinity, and gelatinization enthalpy were found in CY starches from alkaline ST-EX solutions ($NaHCO_3$ and $Na_2CO_3$). Size distribution and gelatinization temperature did not generally differ for CY starches from the different ST-EX solutions. Pasting viscosities increased in the order from $Na_2CO_3$ > $Na_2S_2O_3$ > $NaHCO_3$ > VitC ST-EX solutions. Thus, VitC may be most appropriate to extract CY starch from Dioscorea rhizomes, considering its ST-EX yield, total starch content, and variation in pasting viscosity.

• Journal of Hospice and Palliative Care
• /
• v.12 no.3
• /
• pp.132-138
• /
• 2009

Proper education of hospice professionals is essential for ensuring quality of end-of-life care. In 2005, 'End-of-life Care Task Force Team' by Ministry of Health and Welfare established '60 hours of hospice education' as basic requirement for hospice professionals. This study is aimed to determine how many of the hospice professionals meet with the criteria and whether there are significant regional variations. Methods: We analyzed the data from 46 hospice organizations, which submitted the application to the 2008 designation program of Ministry of Health, Welfare, and Family Affairs. Data included details of the educational records of each hospice professionals. Results: Total 673 hospice professionals were included in the analysis. Overall, only 41.5% (279/673) met the requirement. Nurses (46.8%; 177/378) were more likely to meet the requirement than doctors (35.8%; 38/106), social workers (32.0%; 24/75) and clergies (35.1%; 40/114). Hospice professionals of the organizations in metropolitan area received more education than those in small cities or rural area (52.4% vs. 25.0% for doctors, 50.6% vs. 43.9% for nurses, 42.9% vs. 25.5% for social workers). By geographic areas, hospice professionals in southeast regions received less education than other part of Korea (28.1% vs. 43.0${\sim}$48.8%, respectively). Conclusion: Less than half of the Korean hospice professionals has received proper amount of hospice education, and significant regional variations existed. National programs to promote the education of hospice professionals and eliminate its disparities are greatly warranted. Implementation of the 60-hour currirulum for hospice professionals, based on the train-the-trainer model, would be regarded as one potential solution.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1097-1106
• /
• 1998

Biodegradable edible films were prepared from rice protein concentrates (RPC) made from rice wine meal by alkaline extraction and isoelectric precipitation. The effect of film forming solution pH and plasticizers were studied, and cross-linkers were added to improve mechanical properties and water vapor permeabilities (WVP) of films. Films could be formed within pH $8{\sim}11$ with tensile strength (TS) of 4.3{\sim}5.7\;MPa$. Films produced under pH 11 had the highest TS (5.7 MPa) and the lowest WVP $(0.44\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa)$. Added glycerol, polyethylene glycol 200 (PEG) and its mixture (GLY:PEG=50:50) as plasticizers also affected the mechanical properties and WVP of films. TS and elongation at break (E) of films at various plasticizer levels were $5.5{\sim}1.0\;MPa$ and $3.6{\sim}24.3%$, respectively. At the same plasticizer concentration, the highest TS was observed when glycerol was used whereas the highest E was measured when mixture was used as plasticizer. WVPs of films with thickness of $60\;{\mu}m$ were $0.39{\sim}0.54\;ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$. WVP of films decreased as the ratio of glycerol/PEG 200 was decreased, and WVP increased as the total amount of plasticizer added to the films increased. Film strength was improved by the addition of small amount of sodium hydrogen sulfate, succinic anhydride, ascorbic acid and citric acid, whereas TS of films containing $0.5{\sim}2.0%$ of NaCl and $CaCl_2$ were lower than those without the salts. The highest TS (6.3 MPa) was achieved with films containing 0.1% of succinic anhydride.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.55-64
• /
• 2008

A detailed understanding and appreciation of the important mechanisms operating at the soil:root interface, commonly identified as the rhizosphere, is critical for evaluating the potential for particular plant species to be successfully used as part of a phytoremediation technique. For specific plants, mechanisms may exist to overcome the inherit limitation of the phytoremediation technique when poorly mobile soil metals are of interest. In the present study, the influence of root exudates on the rhizosphere chemistry of soil and consequential metal uptake were investigated following culture of vetiver grass (Vetiveria zizanioides), recognized as a promising plant for land stabilization, in three different long-term contaminated soils and one non-contaminated control soil. The soil solution pH increased (0.3-1.1 units) following vetiver grass culture and dissolved organic carbon (DOC) also significantly increased in all soils with the highest increase in PP02 (23 to $173mg\;L^{-1}$). Chemical changes are contributed to root exudation by vetiver grass when exposed to high concentration of heavy metals. Chemical changes, consequently, influenced metal (Cd, Cu, Pb, and Zn) solubility and speciation in the rhizosphere. The highest solubility was observed for soil Ko01 (eg. 2091 and $318{\mu}g\;L^{-1}$ for Cd and Pb, respectively). Initial heavy metal solubility in soils varied with soil and either increased or decreased following vetiver grass culture depending on the soil type. An increase in pH following plant culture generally resulted in a decrease in metal solubility, while elevated DOC due to root exudation resulted in an increase in metal solubility via the formation of metal-DOC complexes. Donnan speciation demonstrated a significant decrease in free Cd and Zn in the rhizosphere and the concentration of Cd, Pb, and Zn in vetiver grass shoot was highly correlated with soluble concentration rather than total soil metal concentration.

• Journal of Plant Biotechnology
• /
• v.38 no.2
• /
• pp.176-185
• /
• 2011

Rice is one of the most important crop in the world, in particular for food resources. With its small genome size of 383 Mb, the Oryza sativa is a model plant for genome research. Indeed, it's grain provides human with a source of carbohydrates and proteins. Rice grain has relatively low protein contents (around 8%) compared to other legume seeds (around 40%). Osborne classified seed proteins into water soluble albumin, salt soluble globulin, alcohol soluble prolamin and acidic/alkaline solution soluble glutelin. Glutelin and prolamin are the major storage proteins in rice. For the gene expression study of seed storage proteins, we analyzed 33,192 EST clones at immature stages in a rice cultivar (Oryza sativa L. cv. 'Ilpum'). Based on the expression analysis, we cloned 11 glutelin genes and figured out the 8 genes are located on Chromosome 2. The expression of glutelin genes appears to be about 28.2% of total level in immature seeds. Interestingly, glu-04 is duplicated as inverted sequences on the same chromosomes as far 4.5 kb. Our results indicate that glutelin genes, evolutionarily, were replicated on the chromosome and thus expressed as specific manners. In a whole protein composition analysis, glu05 (type B7) contains the highest lysin contents (4.51%) among the 11 rice glutelin genes. It will be an interesting future work to increase lysin contents by the gene overexpressor strategy with the aim of improved diet nutritionally fortified.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.150-157
• /
• 2002

One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Korean Journal of Environmental Biology
• /
• v.20 no.1
• /
• pp.73-77
• /
• 2002

The effect of salicylic acid (SA) on C $d^{2+}$ - induced physiological toxicity in Commelina communis was investigated. 3- weeks old Commelina communis was transferred to and grown in Hoagland solution in the presence or absence of 100 $\mu$M C $d^{2+}$ and SA for 3 weeks. In the treatment of C $d^{2+}$ + SA, the length of stem was increased to 0.7 cm for 3 weeks (C $d^{2+}$, 2.1cm; control, 7.2 cm). C $d^{2+}$ + SA reduced total chlorophyll content up to 86%, and changed chlorophyll a/b ratio below 1.6. C $d^{2+}$ + SA also reduced about 40-78% of water potential, but C $d^{2+}$ increased 16-39% from 1 week to 3 weeks. C $d^{2+}$ + SA also inhibited 27% of Fv/Fm, but in case of C $d^{2+}$, Fv/Fm was not changed. The treatment of C $d^{2+}$ + SA showed about 37-58% inhibition of photosynthetic activity when measured at various light intensity (500-1000 $\mu$mol $m^{-2}$ $s^{-1}$ ). In the case of C $d^{2+}$ treatment, photosynthetic activity was inhibited to 12-15%. Similar effect was found in terms of stomatal conductance. Therefore, it could be concluded that the treatment of C $d^{2+}$ + SA into plant decrease or block various physiological activities and lend to die by double effects of both chemicals.cts of both chemicals..

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.243-248
• /
• 1998

Ark shell was known as shellfish that had hemoglobin as blood pigment and the action of mecidine, was consumed the great part of it as raw material, though it was produced about 13,000 M/T per year. Ark shell was processed the infinitesimal quantity as conned product, bout canned ark shell had problem that occurrenced discoloration after heat treatment during processing and storage. This discoloration mechanism during processing and storage was not cleared. This study was carried out to understand characteristics of the hemoglobin as blood pigment and carotenoid as meat pigment in ark shell and management of proper processing conditions for prevention of oxidation and discoloration by thermal treatment. When treated by digestion of 0.1% BHA, 0.1% Tenox-II, 0.5% Na2EDTA, 0.05% NDGA and 3% salt soln., 0.1% BHA solution was most suitable for stability of carotenoid that the retention ratio of carotenoids were 63.1% after heating to 116$^{\circ}C$ for 120 minutes. In preparation of canned ark shell and storage at 37$\pm$1$^{\circ}C$ for 60 days, the chemical composition, pH and salinity ere stable. And contents of total carotenoid were decreased slightly from 0.83mg% to 0.727mg%. The viable cell count were 6.92$\times$103 cfu/ml at raw ark shell, after processed and storage were not detected. The predominant amino acids in the raw ark shell were glutamic acid(19.7%), arginine(16.0%), glycine(12.6%), alanine(12.2%) and aspartic acid(7.6%). When 60 days stored, the contents of amino acid were stable. And the predominant nuclotide and their related compounds in the raw ark shell were hypoxanthine(2.14$\mu$mol/g), IMP(1.94$\mu$mol/g) and ATP(0.87$\mu$mol/g), and storage at 37$\pm$1$^{\circ}C$ for 60 days, the quantity order were same as raw material.