• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.319-324
• /
• 1998

Sol-gel derived phosphate water-sioluble glasses containing Cu were prepared. Powder-shape of glasses were added in D.I water used polyethylene bottle. After solution contained glass powder were submerged in water bath on 25$^{\circ}C$ their dissolution behavior/characteristics bactericidal effect and cytotoxicity test were evaluated. The maximum amount of Cu(35 mol%) via sol-gel method was more 5 mol% increased than that with melting process. The stage of total dissolution was more dominant than that of selective leaching dur-ing dissolution due to dissolved amount of glasses increased linearly with time. The ratio of Cu+ to {{{{ {Cu }^{2+ } }} was 3:7 so that the structure of glasses is more predominant 2-dimension chain structure than 3-dimenshion po-lymeric structue. The stage of total dissolution was more dominant than that of selective leaching during dissolution. Bactericidal effect against all bacteria showed that solutions which contained 40 ppm and 100 ppm of Cu killed 80 percentages of bacteria within 2 hours and 100 percentages of those within 12 hours. The results of cytotoxicity test for L929 cells showed no cytotoxicity were observed within 96 hours for dis-solved solution that contains 40 ppm and 100 ppm of Cu.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.1
• /
• pp.157-165
• /
• 1998

This paper considers the single-product production and transportation problem with discrete time, dynamic demand and finite time horizon, an extension of classical dynamic lot-sizing model. In the model, multiple freight container types are allowed as the transportation mode and each order (product) placed in a period is shipped immediately by containers in the period. Moreover, each container has type-dependent carrying capacity restriction and at most one container type is allowed in each shipping period. The unit freight cost for each container type depends on the size of its carrying capacity. The total freight cost is proportional to the number of each container type employed. Such a freight cost is considered as another set-up cost. Also, it is assumed in the model that production and inventory cost functions are dynamically concave and backlogging is not allowed. The objective of this study is to determine the optimal production policy and the optimal transportation policy simultaneously that minimizes the total system cost (including production cost, inventory holding cost, and freight cost) to satisfy dynamic demands over a finite time horizon. In the analysis, the optimal solution properties are characterized, based on which a dynamic programming algorithm is derived. The solution algorithm is then illustrated with a numerical example.

• Journal of the Korean Ceramic Society
• /
• v.34 no.1
• /
• pp.13-22
• /
• 1997

Water-soluble phosphate glasses containing Ag and Cu ion were prepared through melting process. Dis-solution characteristics, bactericidal effect and cytotoxicity were investigated with composition and time in D. I. water using the powdered sample. Surface change were observed with increasing dissolution time us-ing the bulk specimen. Dissolution amount was maximum at the molar Ag:Cu ratio of 1 and increased with increasing time. The behavior of dissolution was total dissolution from the early stage. But no new layer was observed at the glass surface during dissolution. The bactericidal effect for pseudomonas sp, e. coli, sta-phylococcus aureus, and salmonella increased with increasing dissolution amount and therefore great bac-tericidal effect appeared. The result of cytotoxicity experiment to L929 showed that solution with more than 10 ppm of Ag ion had strong cytotoxicity.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.366-369
• /
• 2008

To evaluate the performance of a bipolar packed bed cell (BPBC) filled with granular aluminium, the experiments were carried out in two groups as batch and continuous processes. In a batch process, removal efficiency of total phosphate (T-P) was 88% in case of electrolytic treatment of phosphate solution, T-P 10 mg/L at 6 V during 3 h by BPBC filled with granular aluminium. In a continuous process, residual T-P concentration was about 2 mg/L in case of electrolytic treatment of phosphate solution, 10 mg/L at 6 V, HRT 3 h by BPBC filled with granular aluminium. Break-through point was observed after running for 120 h at hydraulic retention time (HRT) of 3 h.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.647-669
• /
• 2016

Multiple attribute for decision making including user preference will increase the complexity of route selection process. Various approaches have been proposed to solve the optimal route selection problem. In this paper, multi attribute decision making (MADM) algorithms such as Simple Additive Weighting (SAW), Weighted Product Method (WPM), Analytic Hierarchy Process (AHP) method and Total Order Preference by Similarity to the Ideal Solution (TOPSIS) methods have been proposed for acoustic signature based optimal route selection to facilitate user with better quality of service. The traffic density state conditions (very low, low, below medium, medium, above medium, high and very high) on the road segment is the occurrence and mixture weightings of traffic noise signals (Tyre, Engine, Air Turbulence, Exhaust, and Honks etc) is considered as one of the attribute in decision making process. The short-term spectral envelope features of the cumulative acoustic signals are extracted using Mel-Frequency Cepstral Coefficients (MFCC) and Adaptive Neuro-Fuzzy Classifier (ANFC) is used to model seven traffic density states. Simple point method and AHP has been used for calculation of weights of decision parameters. Numerical results show that WPM, AHP and TOPSIS provide similar performance.

• Journal of Ginseng Research
• /
• v.1 no.1
• /
• pp.25-28
• /
• 1976

Ginseng extracts were fractionated into several fractions with various organic solvents, and the effects of these fractions on the activity of RNA polymerase were examined. Fractions which showed positive effect on the activity of RNA polymerase were obtained both from white ginseng and red ginseng. For white ginseng the components which hare shown a positive effect on RNA polymerase roue found in total methanol extracts, the residual aqueous solution from ethyl acetate extraction and the methanol insoluble fraction of the above solution, whereas for red ginseng the positive components roue found in total methanol extracts and in ethyl ether extracts. These finding suggest that the ginseng components which have Positive effect on RNA polymerase be composed of Polar and nonpolar moieties, which may be cleaved into the ports during the processing the of red ginseng.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.4
• /
• pp.435-441
• /
• 2014

This paper considers a single-product problem for inbound lot-sizing and outbound dispatching at a third-party warehouse, where the demand is dynamic over the discrete time horizon. Each demand must be delivered into the corresponding delivery time window which is the time interval characterized by the earliest and latest delivery dates of the demand. Ordered products are shipped by heterogeneous container types. Each container type has type-dependent carrying capacity and the unit freight cost depends on each container type. Total freight cost is proportional to the number of each container type used. Also it is assumed that related cost functions are concave and backlogging is not allowed. The objective of the paper is to simultaneously determine the optimal inbound lot-sizing and outbound dispatching plans that minimize total costs which include ordering, shipping, and inventory holding costs. The optimal solution properties are characterized for the problem and then a dynamic programming algorithm is presented to find the optimal solution.

• Journal of Apiculture
• /
• v.32 no.4
• /
• pp.391-394
• /
• 2017

Propolis is made by bees collecting protective material or essence of plants and mixing with saliva and enzymes produced by the salivary glands. It is used to repair the inside of the honeycomb, keep it sterile, and adjust the temperature and humidity. Propolis is a natural antibiotic substance that it is used to make a clean room by coating the cell before the queen bee lay eggs, and preventing the bacteria from invading by using with wax when sealing the nursery room. Propolis extract is a health functional food with antioxidant and oral antimicrobial effects. In order to use propolis in food, its active ingredients are extracted with ethanol. Water-soluble propolis was prepared by mixing and stirring honey and ethanol extracted propolis (EEP) solution. When 1kg of honey and 100ml of ethanol extracted propolis solution were mixed and stirred, the total flavonoid content of water-soluble propolis was $6.6{\pm}1.1mg/10g$, and the free radical scavenging effects of water-soluble propolis were 54 to 74%.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.6
• /
• pp.890-896
• /
• 2018

The aim of this study was to determine volatile flavor compounds in Shingo pear juice. Volatile flavor compounds were analyzed using solid-phase micro-extraction (SPME) - gas chromatography-mass spectrometry (GC-MS). The effect of inorganic salts solution on the extraction ability of the SPME fiber was treated by adding saturated $CaCl_2$ solution at the ratio of 1:20 (v/v) after 0, 60, 120 min of preparing pear juice, respectively. As a result, a total of 22 volatile compounds were identified in Shingo pear juice. Ethyl acetate was found to be the most abundant volatile compound ($13.36{\sim}19.61{\mu}g/kg$), followed in order by hexanal, ethyl hexanoate, ethyl 3-(methylthio)-2-propenoate, ethyl octanoate and 2-hexenal. Total contents of volatile flavor compounds were $31.07{\mu}g/kg$ (control), $40.93{\mu}g/kg$ (0 min), $27.62{\mu}g/kg$ (60 min) and $26.32{\mu}g/kg$ (120 min). This result indicated that the addition of saline solutions could inhibit the enzymatic reaction of volatile flavor compounds effectively when treated as soon as juice preparation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.134-141
• /
• 2022

Transportation in urban area has been getting hard to fulfill the demand on time. There are various uncertainties and obstacles related with road conditions, traffic congestions, and accidents to interrupt the on-time deliveries. With this situation, the last mile logistics has been a keen issue for researchers and practitioners to find the best strategy of the problem. A way to resolve the problem is to use parcel lockers. Parcel locker is a storage that customers can pick up their products. Transportation vehicles deliver the products to parcel lockers instead of all customer sites. Using the parcel lockers, the total delivery costs can be reduced. However, the inconvenience of customer has to increase. Thus, we have to optimal solution to balance between the total delivery costs and customers' inconvenience. This paper formulates a mathematical model to find the optimal solution for the vehicle routing problem and the location problem of parcel lockers. Experimental results provide the viability to find optimal strategy for the routing problem as well as the location problem.