• Bulletin of the Korean Chemical Society
• /
• 제23권12호
• /
• pp.1719-1723
• /
• 2002

1,5-diphenylcarbazone was immobilized on sodium dodecyl sulfate coated alumina. The alumina particle was effectively used for collection of mercury(II) and methylmercury cations at sub-ppb level. The adsorbed mercury was eluted with l mol $L^{-1}$ of hydrobromic acid solution. The mercury(II) was then directly measured by cold vapor atomic absorption spectrometry utilizing tin (II) chloride where as the total mercury was determined after the oxidation of methylmercury into the inorganic mercury. The methylmercury concentration was calculated by the difference between the value of total mercury and mercury (II). Mercury (II) and methylmercury cations were completely recovered from water with a preconcentration factor of 100 (for 1 L solution.) Relative standard deviation at Hg L ${\mu}gL^{-1}$ level 1.7%(n=8) and the limit of detection was 0.11 ${\mu}gL^{-1}$. The procedure was applied to spring water, well water and seawater and accuracy was assessed through recovery experiments.

• 한국식품영양과학회지
• /
• 제27권2호
• /
• pp.268-274
• /
• 1998

The traditional kanjang has been prepared by mixing meju and 18% saline solution, and fermenting for 60 days. The traditional kanjang is very salty and inferior in flavor and taste comparing with commercial fermented soy sauce. To improve the quality of traditional kanjang, Zygosaccharomyces rouxii H-62, a flavor-related mutant, was inoculated during fermentation. It was found that the addition of Z rouxii helped to improve the organoleptic quaity of traditional kanjang. The optimal condition for preparing traditional kanjang was to use 5L of 15.5% saline solution per meju. Meju must be cut into 12 pieces to get a proper total nitrogen and pure extract content. The optimal fermentatin temperature was 3$0^{\circ}C$. The prepared kanjang contained over 0.8% total nitrogen and 6.0% pure extract after 60 days of fermentation.

• 전자공학회논문지B
• /
• 제30B권7호
• /
• pp.1-13
• /
• 1993

In this paper, the problems of the conventional special-purpose array processor such as the deficiency of flexibility have been investigated. Then, a new modified methodology has been suggested and applied to obtain the common solution of the three typical App algorithms like SP(Shortest Path), TC(Transitive Closure), and MST(Minimun Spanning Tree) among the various APP algorithms using the similar method to obtain the solution. In the newly proposed APP parallel algorithm, real-time Processing is possible, without the structure enhancement and the functional restriction. In addition, we design 2-demensional bit-parallel low-triangular systolic array processor and the 1-PE in detail. For its evaluation, we consider its computational complexity according to bit-processing method and describe relationship of total chip size and execution time. Therefore, the proposed processor obtains, on which a large data inputs in real-time, 3n-4 execution time which is optimal o(n) time complexity, o(n$^{2}$) space complexity which is the number of total gate and pipeline period rate is one.

• 대한안전경영과학회지
• /
• 제13권3호
• /
• pp.107-114
• /
• 2011

Traveling salesman problem is to minimize the total cost for a traveling salesman who wants to make a tour given finite number of cities along with the cost of travel between each pair them, visiting each cities exactly once before returning home. Traveling salesman problem is known to be NP-hard, and it needs a lot of computing time to get the optimal solution, so that heuristics are more frequently developed than optimal algorithms. This study suggests a hybrid parallel genetic algorithm(HPGA) for traveling salesman problem The suggested algorithm combines parallel genetic algorithm, nearest neighbor search, and 2-opt. The suggested algorithm has been tested on 7 problems in TSPLIB and compared the results of existing methods(heuristics, meta-heuristics, hybrid, and parallel). Experimental results shows that HPGA could obtain good solution in total travel distance minimization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2678-2680
• /
• 2001

We develop a total solution system for applications, which is called a data processing module system(DPMS), based on ASP, PDF, JAVA, and MSSQL. The DPMS system provides a realtime telematic guidance in the fields of application, recruiting, and management. The user documents the PDF file on the Web browser and store the file in DB for correction. The DPMS discovered the difficulties in data input due to 2 byte problem of Korean language. This result leads to the usage of Korean language as well as others. Test results through free-charge access confirm that the DPMS outperforms the conventional systems based on ASP with HTML in view of simplicity and confidentiality.

• Journal of Chest Surgery
• /
• 제18권4호
• /
• pp.598-604
• /
• 1985

One hundred consecutive patients with the Tetralogy of Fallot underwent total correction at National Medical Center during the period 1977 to 1984, Oct. During this study period, we adopted more active policy towards reconstruction of right ventricular outflow tract across pulmonary valve. The mortality was 48% for patients less than 15 kg and 19% in patients above 15kg. Initially Bretschneider`s solution was used as cardioplegia, which was replaced by St. Thomas` solution since 1983, Jan. After then overall mortality dropped to 9% compared to 45% of initial learning period. Heart block occurred In 11 patients, 10 of whom died of combined low cardiac output syndrome. Pure low cardiac output syndrome was noted in 18 patients, most of whom responded to medical measures well except 4 patients. Recently sepsis of Serratia marcescence, which occurred explosively during several months to open heart surgery patients, attacked 3 tetralogy patients resulting in 2 hospital deaths. Our experience has shown that body weight, choice of cardioplegia and accumulation of experience as well as advance of operative and postoperative techniques are still important factors affecting survival rate at initial learning period.

• Bulletin of the Korean Chemical Society
• /
• 제11권2호
• /
• pp.144-149
• /
• 1990

Conformational free energy calculations using an empirical potential function (ECEPP/2) and the hydration shell model were carried out on the sulfonylurea herbicides of bensulfuron methyl (Londax) and metsulfuron methyl (Ally). The conformational energy was minimized from starting conformations which included possible combinations of torsion angles in the molecule. The conformational entropy of each conformation was computed using a harmonic approximation. To understand the hydration effect on the conformation of the molecule in aqueous solution, the hydration free energy of each group was calculated and compared each other. It was found that the low-free-energy conformations of two molecules in aqueous solution prefer the overall folded structure, in which an interaction between the carbonyl group of ester in aryl ring and the first amido group of urea bridge plays an important role. From the analysis of total free energy, the hydration and conformational entropy are known to be essential in stabilizing low-free-energy conformations of Londax, whereas the conformational energy is proved to be a major contribution to the total free energy of low-free-energy conformations of Ally.

• Coupled systems mechanics
• /
• 제8권5호
• /
• pp.459-471
• /
• 2019

This paper presents post-buckling analysis of a functionally graded beam under hygro-thermal effect. The material properties of the beam change though height axis with a power-law function. In the nonlinear kinematics of the post-buckling problem, the total Lagrangian approach is used. In the solution of the problem, the finite element method is used within plane solid continua. In the nonlinear solution, the Newton-Raphson method is used with incremental displacements. Comparison studies are performed. In the numerical results, the effects of the material distribution, the geometry parameters, the temperature and the moisture changes on the post-buckling responses of the functionally graded beam are presented and discussed.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.433-441
• /
• 2019

In this paper, geometrically nonlinear static analysis of laminated composite beams is investigated under hygrothermal effect. In the solution of problem, the finite element method is used within the first shear beam theory. Total Lagrangian approach is used nonlinear kinematic model. The geometrically nonlinear formulations are developed for the laminated beams with hygro-thermal effects. In the nonlinear solution of the problem, the Newton-Raphson method is used with incremental displacement. In order to verify of obtained formulations, a comparison study is performed. The effects of the fiber orientation angles, the stacking sequence of laminates, temperature rising and moisture changes on the nonlinear static displacements and configurations of the composite laminated beam are investigated in the numerical results.

• Earthquakes and Structures
• /
• 제26권2호
• /
• pp.163-174
• /
• 2024

Dynamic equilibrium equations for finite element analysis were derived for the free field one-dimensional shear wave propagation through the horizontally layered soil deposits with the elastic half-space. We expressed Rayleigh's viscous damping consisting of mass and stiffness proportional terms. We considered two cases where damping matrices are defined in the total and relative displacement fields. Two forms of equilibrium equations are presented; one in terms of total motions and the other in terms of relative motions. To evaluate the performance of new equilibrium equations, we conducted two sets of site response analyses and directly compared them with the exact closed-form frequency domain solution. Results show that the base shear force as earthquake load represents the simpler form of equilibrium equation to be used for the finite element method. Conventional finite element procedure using base acceleration as earthquake load predicts exact solution reasonably well even in soil deposits with unrealistically high damping.