• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.159-162
• /
• 2011

스마트그리드는 기존의 전력 생산, 운반, 소비의 과정에 정보통신 기술을 접목하여 에너지 절감 및 전기 품질 향상 등을 제공하는 차세대 전력망으로써 스마트 미터 중심의 AMI, 에너지 관리 시스템, 전기 자동차 및 충전소, 재생에너지, 양방향 정보통신 기술, 배전 자동화 시스템 등으로 구성된다. 이중 미터기, 수용가 전력기기, 근거리 통신기술, 데이터 관리 시스템 등은 "제주도 실증단지구축"사업의 핵심 요소로써, 국내 기업들의 활발한 연구가 이루어지고 있다. 하지만 국내에서 연구되고 있는 스마트그리드 구축과 관련된 소프트웨어들은 외산 솔루션에 기반하고 있거나 자체개발을 통해 이루어지고 있어 기술 지원 부재 및 개발 소요 시간이 길다는 문제점을 가지고 있다. 따라서 본 논문에서는 이러한 문제점을 해결하기 위해 오픈 소스 소프트웨어 기반의 스마트그리드 통합시설관제시스템을 제안하고, 구축하도록 한다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.63-72
• /
• 1999

Many firms have applied flexible manufacturing systems as a means of increasing productivity, profitability, and quality. Therefore, the purpose of this paper is to develop the more efficient justification model through an analytical scoring model with the quantitative factors, flexibility factors, and safety factors under uncertainty. In this paper, the three factors for properly comparing and evaluating of flexible manufacturing systems are presented. Especially, this paper has emphasized the flexibility and safety factor; the one consists of organization assessment, process treatment function, products and products quantity, useful life assesment, and software function, the other presents risk assesment, Y2K problem, safety device analysis, total productive management system, safety management. Finally, a normalized scoring model by the new flexibility and safety factors can be used in real fields for flexible manufacturing systems project selection under uncertainty.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.11a
• /
• pp.139-143
• /
• 2001

Work-related injurieshave become the issue in the twentieth century. Musculoskeletal disorders are the most common work-related injuriesand the most frequent from of work-related i11-health (more than 50％ of total work-related injuries (BLS 1990)). The workers at copy shops have complained of pain in their back, legs, and shoulders. Most of them work for more than 8 hours a day. They have claimed that their pains were associated with repetitive and continuous work over a long term. The purpose of this research is to suggest an ergonomically comfortable redesign of the copy machine. This study was performed by conducting a survey of copy shop workers who have complained of job-related physical pain, and analyzing their working postures. The copy machine was ergonomically modified to reduce the workers' pain. The VIS10N 3000 software was used to analyze the posture. The analysis showed significant difference in the ranges of back and neck motion (p<0.05).

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1303-1308
• /
• 2008

This paper presents effects of impeller geometrical parameters on the performance of a centrifugal pump impeller. The effects of meridional parameters and vane plane development parameters on the performance of the impeller were numerically studied using a commercial CFD code and DOE(design of experiments) software. Geometrical parameters in a method of meridional view and vane plane development were selected and defined to generate the 3D impeller shape. The response variables are defined in a total head and efficiency curve with flow rate. The influences of selected design variables on the various objective functions were examined as a result of the calculation using 2k factorial.

• Korean Journal of Veterinary Research
• /
• v.53 no.2
• /
• pp.73-76
• /
• 2013

The aim of this study was to produce a simple and inexpensive technique for estimating the obturator foramen area (OFA) from young calves based on the hypothesis that OFA can be extrapolated from simple linear measurements. Three linear measurements - dorsoventral height, craneocaudal width and total perimeter of obturator foramen - were obtained from 55 bovine hemicoxae. Different algorithms for determining OFA were then produced with a regression analysis (curve fitting) and statistical analysis software. The most simple equation was OFA ($mm^2$) = [3,150.538 + ($36.111^*CW$)] - [147,856.033/DH] (where CW = craneocaudal width and DH = dorsoventral height, both in mm), representing a good nonlinear model with a standard deviation of error for the estimate of 232.44 and a coefficient of multiple determination of 0.846. This formula may be helpful as a repeatable and easily performed estimation of the obturator foramen area in young bovines. The area of the obturator foramen magnum can thus be estimated using this regression formula.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.529-536
• /
• 2002

The purpose of this paper os to present and discuss some of flow and drain observed in modelling results. Because dredged fill ground of Yul-Chon located in the south coast of Korea is very soft, this ground should be improved after operation of surface stabilization. There are surface stabilization method such as chemical stabilization, desiccation, horizontally vacuum drain, replacement, and geosynthetics. In Yul-Chon, PTM(Progressive Trenching Method) is adopted to provide the necessity condition of surface desiccation. In the case trench in the dredged soft ground is formed by PTM equipment, pore water in the ground is drained through trench. There, drain and desiccation of surface ground increase, and bearing capacity is improved. In this research, when trench in the dredged soft ground is formed by PTM equipment, permeable characteristics and drain efficiency of pore-water are analyzed using SEEP/W software package. Results show variation of total head, pressure head, flux, hydraulic gradient, and flow quantity.

• Structural Engineering and Mechanics
• /
• v.41 no.1
• /
• pp.83-94
• /
• 2012

Assessment of a monumental concrete arch bridge with a total length of 210 meters having three major spans of 30 meters and a height of 65 meters, which is located in an earthquake-prone region in southern part of the country is presented in this study. Three-dimensional finite element model of the bridge was generated using a commercially available general finite element analysis software and based on the outcomes of a series of in-depth acceleration measurements that were conducted on-site, the model was refined. By using the structural parameters obtained from the dynamic and the static tests, calibrated model of the bridge structure was obtained and this model was used for necessary calculations regarding structural assessment and evaluation.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.436-441
• /
• 2001

In this paper, stacker crane is modeled as rigid elements and discrete flexible beam connections by kinematics & dynamics solver package program instead of deriving the equations of motion which describes the total dynamics of the system. For the simulation of structural dynamics, ADAMS, a software for the simulation of multiple rigid body dynamics, is used. Some kinds of works are fulfilled to examine the dynamic characteristics of system. In order to verify the analysis method, the results of simulation and experiment are compared.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2105-2110
• /
• 2004

Plate-fin type recuperators for the gas turbine/fuel cell hybrid power generating system were designed using commercial design software, MUSE. Heat transfer efficiency and total pressure drop in the recuperator were calculated to confirm required recuperator performance. Both counter flow and cross flow type plate-fin recuperators were designed. Results show that the counter flow type has higher efficiency and short core length, but the cross flow type is simpler to construct because the cross flow type does not need additional distributors. Two or three headers for the each recuperator core will be designed and tested to evaluate best header design. The designed recuperators and headers which will be designed later will be constructed, tested, and used in gas turbine/fuel cell hybrid power generating system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.324-345
• /
• 2015

A new procedure for determining properties of thick plate finite elements, based on the modified Mindlin theory for moderately thick plate, is presented. Bending deflection is used as a potential function for the definition of total (bending and shear) deflection and angles of cross-section rotations. As a result of the introduced interdependence among displacements, the shear locking problem, present and solved in known finite element formulations, is avoided. Natural vibration analysis of rectangular plate, utilizing the proposed four-node quadrilateral finite element, shows higher accuracy than the sophisticated finite elements incorporated in some commercial software. In addition, the relation between thick and thin finite element properties is established, and compared with those in relevant literature.