• Computers and Concrete
• /
• v.6 no.3
• /
• pp.253-268
• /
• 2009

This study aims to develop a cost-based high-performance concrete (HPC) mix optimization system based on an integrated approach using artificial neural networks (ANNs) and genetic algorithms (GA). ANNs are used to predict the three main properties of HPC, namely workability, strength and durability, which are used to evaluate fitness and constraint violations in the GA process. Multilayer back-propagation neural networks are trained using the results obtained from experiments and previous research. The correlation between concrete components and its properties is established. GA is employed to arrive at an optimal mix proportion of HPC by minimizing its total cost. A system prototype, called High Performance Concrete Mix-Design System using Genetic Algorithm and Neural Networks (HPCGANN), was developed in MATLAB. The architecture of the proposed system consists of three main parts: 1) User interface; 2) ANNs prediction models software; and 3) GA engine software. The validation of the proposed system is carried out by comparing the results obtained from the system with the trial batches. The results indicate that the proposed system can be used to enable the design of HPC mix which corresponds to its required performance. Furthermore, the proposed system takes into account the influence of the fluctuating unit price of materials in order to achieve the lowest cost of concrete, which cannot be easily obtained by traditional methods or trial-and-error techniques.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.5
• /
• pp.251-258
• /
• 2014

This paper proposes an efficient token flow design methodology for a decoder in the MPEG Reconfigurable Media Coding (RMC) framework. The MPEG RMC framework facilitates a decoder to be configured with a set of modules called functional units (FUs) that are connected by tokens. Such a modular design philosophy of the MPEG RMC framework enables the reusability and reconfigurability of FUs. One drawback of the MPEG RMC framework is that the decoder performance can be affected by increasing the token transmissions between FUs. The proposed method improves the design of the FU network in the RMC framework toward real-time decoder implementation. In the proposed method, the merging of FU, the separation of token flow, and the merging of token transactions are applied to minimize the token traffic between FUs. The experimental results of the MPEG-4 SP decoder show that the proposed method reduces the total decoding time by up to 77 percent compared to the design of the RMC simulation model.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.8-14
• /
• 2007

In the product design process computer-aided engineering and optimization tolls are widely utilized in order to reduce the total development time and cost. Since several simulation tools are involved in the process, information losses, omissions, or errors are common and the importance of seamless information exchange among the tools has been increased. In this work, ISO STEP standards are adopted to represent the neutral format for structural analysis and optimization. The schema of AP209 defined the information of finite element analysis is used and the new schema is proposed to describe the information of structural optimization based on the STEP methodology. The schema is implemented by EXPRESS, information modeling language, and ST-Developer is employed to generate C++ classes and STEP Rose Library by using the schema denoted. To substantiate the proposed approach, the information access interfaces of the finite element modeling software (FEMAP), structural optimization software(GENESIS) and in-house topology optimization program are developed. Examples are shown to validate the information exchange of finite element analysis and structural optimization using STEP standards.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.809-813
• /
• 2010

Although the goals of HL7 Version 2(V2) and Version 3(V3) are identical, the concepts of the implementation and technological basis are different; this makes their versions inconvertible. This problem interrupts technological innovation advanced from V2 to V3 and has been raised as a new type of barrier in the field of medical information system. This study intends to develop software to convert V2 to V3 which can be utilized in the actual medical environment. Since it is practically difficult to develop the whole tools that automatically change total V2 messages into V3 messages, this article has designed, implemented, and tested the software that allows mapping between V2 and V3 which function as tools. In order to test this program, it has used ADT^A03 of five V2 messages to generate V3 messages. It is expected that the result of this research will be one of the new methods allowing conversion between V2 and V3.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.15-16
• /
• 2015

Measuring sensor, equipment, ICT facilities and their software have relatively short life time comparing to constructional structure so that we should exchange or fix them continuously in the process of maintenance and management. In this paper, we propose a novel design of integrated maintenance, management, and measuring monitoring system applying the concept of mobile cloud. For the sake of disaster prevention for constructional structures such as bridge, tunnel, and other traditional buildings in the village of local heritage, we analyze status of these structures in the long term or short term period as well as disaster situations. Collecting data based on mobile cloud and analyzing future expectations based on probabilistic and statistical techniques, we implement our integrated monitoring system for constructional structures to solve these existing problems. Final results of this design and implementation are basically applied to the monitoring system for more than 10,000 structures spread over national land in Korea. In addition, we can specifically apply the monitoring system presented here to a bridge of timber structure in Asan Oeam Village and a traditional house in Andong Hahoe Village to watch them from possible disasters. Total procedure of system design and implementation as well as development of the platform LinkSaaS and application services of monitoring functions implemented on the platform. We prove a good performance of our system by fulfilling TTA authentication test, web accommodation test, and operation test using real measuring data.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1267-1276
• /
• 1997

In this paper, the optimal model for specific test data was selected autimatically among sofware reliability growh models bassed on NAPP(Non Homogeneous Posission Preocess), and in result the tool for the reliability estimating scales was implemented.Whith the implemented tool, software optimal rekiability estimating scales(total expected number errors, error detection rate, expected number of errors remaining in the sortware, reliability, ete) could be predicted. By the reliability estimating scales gained form this, sofware development and projecr management could be applied. In order to test the optimal of the implemented tool, the comparicon with other paper and analization was done by using actual error data.

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.1-6
• /
• 2017

According to Gartner, the size of the global health care industry in 2020 is expected to reach $ 850 billion, which is 15 percent of the total IoT market. The health care market is growing a lot lately, and many people are looking for a fitness center to build a healthy body. Sometimes, they exercise the wrong way by exercising exercise in the wrong way. Even though it is recommended to use the exercise, it is problematic to know how to use it or not to use it. It is becoming a problem. This paper designed the NFC fitness center customized for the fitness center that users use to improve the previously presented problem.

• Publications of The Korean Astronomical Society
• /
• v.9 no.1
• /
• pp.101-110
• /
• 1994

We have investigated intensively an optical telescope with 76cm diameter and CCD camera system in astronomical observatory of Kyung Hee university, in order to maximize instrumental functions of our observational equipments and to construct a more reliable photometric system. And computer softwares AUTO DOME, KH CCD and KH PHO for astronomical image observations and their automatic photometries with high accuracy have been made for observers w use our observational system conveniently and efficiently. Throughout careful examinations of these programs, it has been proved that the observing time by our program is shorter than that by manual operations, so that, fast and accurate observations can be executed with ease. For open cluster NGC 7063 observed with S/N value of 350 or more by KH PHO, we have found the magnitude measurements of 11 object stars would show 0.007 magnitude difference, comparing with magnitude data from IRAF/APPHOT. From automatic photometry of eclipsing binary, AB And observed by our software, total 220 data points with good quality have been acquired during 8 hours and so we could make a better light curve than that obtained from any observational results by domestic photoelectric photometry system.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1234-1239
• /
• 2003

In the product design process computer-aided engineering and optimization tools are widely utilized in order to reduce the total development time and cost. Since several simulation tools are involved in the process, information losses, omissions, or errors are common and the importance of seamless information exchange among the tools has been increased. In this study ISO STEP standards are adopted to represent the neutral format for CAE/CAO information exchange. The schema of AP209 is used to define the information of finite element analysis and the new schema is proposed to describe the information of structural optimization based on the STEP methodology. The schema is implemented by EXPRESS, information modeling language, and ST-Developer is employed to generate C++ classes and STEP Rose Library by using the schema denoted. To substantiate the proposed approach, the information access interfaces of the finite element modeling software (FEMAP), structural optimization software (GENESIS) and in-house topology optimization program are developed. Examples of the size optimization of a three-bar truss and topology optimization of a MBB beam are shown to validate the information exchange of finite element analysis and structural optimization using STEP standards.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.41-59
• /
• 2018

In the study, investigation of fiber- reinforced composite materials that can be an alternative to conventional steel was performed by finite element analysis with the help of software. Steel and composite materials have been studied on a four axle truck chassis model. Three-dimensional finite element model was created with software, and then analyzes were performed. The analyses were performed for static and dynamic/fatigue cases. Fatigue cases are formed with the help of design spectra model and fatigue analyses were performed as static analyses with this design spectra. First, analyses were performed for steel and after that optimization analyses were made for the AS4-PEEK carbon fiber composite and Eglass-Epoxy fiber composite materials. Optimization of composite material analyzes include determining the total laminate thickness, thickness of each ply, orientation of each ply and ply stacking sequence. Analyzes were made according to macro mechanical properties of composite, micromechanics case has not been considered. Improvements in weight reduction up to %50 provided at the end of the composite optimization analyzes with satisfying stiffness performance of chassis. Fatigue strength of the composite structure depends on various factors such as, fiber orientation, ply thickness, ply stack sequence, fiber ductility, ductility of the matrix, loading angle. Therefore, the accuracy of theoretical calculations and analyzes should be correlated by testing.