• Quality Improvement in Health Care
• /
• v.8 no.2
• /
• pp.208-217
• /
• 2001

Background : The objective of this study is proving the basic data for developing a management system for the discharges against medical advice(AMA) by identifying the characteristics of the AMA patients of an university hospital for 10 years. Methods : By using discharge abstract data base, we divided the total discharges(435,254) into two groups, discharge against medical advice and discharge with discharge order. We confirmed the characteristics of AMA group by analyzing discharge abstract data of the both groups by SAS software V6.12 and $x^2$ test. Medical records of AMA patients in the year 2000 were reviewed to identify the reasons for AMA which we couldn't extract from discharge abstract DB. Result : The total number of AMA for 10 years were 9,358(2.15%) and the AMA rate has been continuously decreased for 10 years. Male, admission through emergency room, discharges admission via other hospital, patients without operation during hospitalization, discharges in hopeless or not improved condition showed higher AMA rate. The AMA rate was higher as the age of the patients was higher, and the average length of stay was longer in AMA patients than in those with discharge order. The AMA rate in psychiatry was highest(14.3%) and it was higher in surgery departments than those of medical or other sections. The AMA rate varied by attending physicians even in the same department and it was statistically significant. Patients with the principal diagnosis of "medical observation and evaluation for suspected diseases" showed the highest AMA rate(15.5%), and that of schizophrenia or psychosis was the nest. One hundred twenty-one patients(19.5%) out of 622 AMA in 2000 discharged against medical advice for transfer to order health care facilities. Among them 71 patients(58.7%) discharged with their medical care information, such as copies of medical record, medical certificates, summaries, etc. Written oath of the patients discharged AMA was filed in their medical records in 466 cases(74.9%) although some of them were incomplete. Conclusion : Characteristics of AMA discharge could be used as the basic data in developing a system to manage the patients who have risk factors to leave the hospital against medical advice. By reducing number of patients leaving the hospital against medical advice we can increase satisfaction of medical providers and consumers.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.62-62
• /
• 2003

과학위성 1호에는 위성의 임무를 수행하기 위하여 광학계, 구조부, 및 전자부 등 여러가지 부품들이 실장되는데, 그 중 전자부의 가장 중요한 부품 중의 하나인 인쇄회로기판(Printed Circuit Board, PCB)의 우주환경에서의 특성 대해서 논의하고자 한다. Solder Resistor(Solder Mask)의 화학성분이 위성체가 작동하는 우주환경에서 위성체 임무수행 시 발생할 수 있는 out-gassing으로 인해 위성체가 본연의 임무 실패라는 결과를 초래할 수 있다 NASA 및 ESA의 Out-gassing에 관한 규정과 TRW에 의한 KOMSAT에 사용된 재료의 진공상태의 Outgassing에 관한 내용에 의하면, 재료의 진공상태와 Out-gassing은 America Society for Testing and Materials에서 제시한 ASTM E959 기준에 따라 제작된다. 일반적으로 우주 환경에서 광학계나 전자부의 원활한 동작을 위해서는 인쇄 회로 기판의 총 질량손실(Total Mass Loss, TML)은 1.00%을 넘지 말아야 하며, 휘발성 응축 질량 (Collected Volatile Condensable Mass, CVCM)은 0.1% 미만이어야 한다. Total Mass Loss(TML) 방법은 대기중에서 측정한 질량과 진공 조건에서 변화되는 질량을 측정함으로써 진공조건에서의 탈기체 특성을 측정하는 방법이다. 본 연구에서는 Solder Resistor(Solder Mask)의 탈기체 측정을 위한 진공챔버의 측정방법 및 진공 형성 과정을 기술하고 실제 과학위성1호에 장착될 시료를 예로 들어 인쇄회로기판에 입힌 Solder Resistor(Solder Mask)가 우주환경인 진공상태에서 위성체 부품의 작동 시 발생할 수 있는 탈기체되는 정도를 질량의 변화분으로 측정하여 위성체가 우주 환경에서 본연의 임무를 안전하게 수행할 있는지를 검증하였다.부분이다.다.향을 해석하고 시뮬레이션 하였다.Device Controller)는 ECU로부터 명령어를 받아서 arm 및 safe 상태에 대한 텔리 메트리 데이터를 제공한다 그리고, SAR(Solar Array Regulator)는 ECU로부터 Bypass Relay 및 ARM Relay에 관한 명령어를 받아 수행되며 그에 따른 텔리 메트리 데이터를 제공한다. 마지막으로 EPS 소프트웨어를 검증하는 EPS Software Verification을 수행하였다 전력계 소프트웨어의 설계의 검증 부분은 현재 설계 제작된 전력계 .소프트웨어의 동작 특성 이 위성 의 전체 운용개념과 연계하여 전력계 소프트웨어가 전력계 및 위성체의 요구조건을 만족시키는지를 확인하는데 있다. 전력계 운용 소프트웨어는 배터리의 충ㆍ방전을 효율적으로 관리해 3년의 임무 기간동안 위성체에 전력을 공급할 수 있도록 설계되어 있다this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을 고려한 GMMAL 작업순서문제를 해결하기 위한 연구가 수행되어야 할 것이다.로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응$\lrcorner$과 $\ulcorner$표현$\lrcorner$의 성격과 형태를 외형상으로

• Journal of Distribution Science
• /
• v.13 no.11
• /
• pp.79-92
• /
• 2015

Purpose - The aim of this study is to develop an empirical model of the effects of traditional market service quality factors on customer value, relationship quality, and behavior. The specific objectives of the study are as follows: 1) to classify study objects into cultural tourism markets and non-cultural tourism markets as well as to verify the differences in service quality among the two markets and, 2) to present practical service marketing methods that fit with the characteristics of the traditional markets by amending the five quality evaluation items of SERVQUAL (a multiple-item scale for measuring service quality)to suit the characteristics of the traditional markets and establish the relationship among customer value, relationship quality, and behavior intention. Research design, data, and methodology - The study methods of empirical investigation are as follows. First, this study selected for a study object the Suwon Paldalmun Gate Market to represent the cultural tourism market, and general traditional markets to represent the non-cultural tourism market. This study also conducted personal interviews in order to increase the response rate and collected a total of 418 responses between March 18, 2014 and April 05, 2014. The total of 418 responses used for this study excluded 14 responses that had either misleading information or missing values. Results - This study verified the perceived differences of service quality based on traditional market specialization through an independent sample t-test. It appeared that the perceived service quality of the cultural tourism market was generally higher than that of the non-cultural tourism market. This study executed a path analysis in order to examine the effects of service quality factors on customer value, relationship quality, and behavior intention. This study also comprehensively analyzed the specialized market and non-specialized market separately. Although there were some differences among the results, the overall results were uniform. It appeared that convenience, reliability, and empathy, among the service quality factors, exerted meaningful effects on customer value. On the other hand, convenience, reliability, responsiveness, and empathy, excluding the tangibles, exerted meaningful effects on the relationship quality. In addition, it appeared that all service quality factors exerted meaningful effects on the customer value, relationship quality, and behavior intention. Therefore, the study verified that all of the hypotheses formulated in the study were generally adopted. Conclusions - The implication of this study may be classified into academic and practical implication as follows. With respect to the academic implication, it seems that this study is among the early studies to verify the differences between the cultural tourism market and the non-cultural tourism market. The practical implication of this study is that the perceived service quality, such as convenience, reliability, responsiveness, and tangibles, excluding empathy, was higher in the cultural tourism market than in the non-cultural tourism market. This means that customer satisfaction is enhanced by governmental aid such as hardware, software, and information and communications technology.

• The Journal of the Korea Contents Association
• /
• v.16 no.5
• /
• pp.420-427
• /
• 2016

The purpose of this study was to identify association between total sleep time and suicidal ideation in adults with mental problems and without. The data were derived from the fifth Korea national health and nutrition examination survey and analyzed using the IBM SPSS Statistics version 21.0 software package considering complex samples analysis. The subjects were 6,199 adults. The rate of suicidal ideation was 13.7% (880 people). 13.3% (846 people) of the subjects had experienced depression and out of whom 43.1% (329 people) have had suicidal ideation. 2.7% (164 people) of the subject had received the mental health counseling, and out of whom 40.2% (63 people) have had suicidal ideation. Comparing to group having sleep over 6 hours of more, the group of short sleep had 1.33 times high risk of suicidal ideation among general adults, 1.92 times high risk of suicidal ideation among group who had experienced depression and, 7.10 times high risk of suicidal ideation among group who had received the mental health counseling. Therefore, these results indicate that general adults with short sleep time as well as adults with depression or mental health problems have to be managed to prevent suicide.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.3
• /
• pp.1-12
• /
• 2011

Large-sized multi-touch screen is usually made using infrared rays. That is because it has technical constraints or cost problems to make the screen with the other ways using such as existing resistive overlays, capacitive overlay, or acoustic wave. Using infrared rays to make multi-touch screen is easy, but is likely to have technical limits to be implemented. To make up for these technical problems, two other methods were suggested through Surface project, which is a next generation user-interface concept of Microsoft. One is Frustrated Total Internal Reflection (FTIR) which uses infrared cameras, the other is Diffuse Illumination (DI). FTIR and DI are easy to be implemented in large screens and are not influenced by the number of touch points. Although FTIR method has an advantage in detecting touch-points, it also has lots of disadvantages such as screen size limit, quality of the materials, the module for infrared LED arrays, and high consuming power. On the other hand, DI method has difficulty in detecting touch-points because of it's structural problems but makes it possible to solve the problem of FTIR. In this thesis, we study the algorithms for effectively correcting the distort phenomenon of optical lens, and image processing algorithms in order to solve the touch detecting problem of the original DI method. Moreover, we suggest calibration algorithms for improving the accuracy of multi-touch, and a new tracking technique for accurate movement and gesture of the touch device. To verify our approaches, we implemented a table-based multi touch screen.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9107-9112
• /
• 2014

Purpose: To investigate and study the relationship between the PLCE1 rs2274223 gene polymorphism and susceptibility to esophageal cancer by meta-analysis. Materials and Methods: The literature was searched in Wanfang, CNKI, PubMed, CBM, Web of Science, MEDLINE, EMBASE, Springer, Elsevier and Cochrane databases from the date of January $1^{st}$ 2004 to April $1^{st}$ 2014 to collect case-control studies on the PLCE1 polymorphism and susceptibility to esophageal cancer. For the population genotype distributions of both esophagus cancer and control groups, their odds ratios (ORs) and 95% confidence intervals (CIs) were taken as effect indexes. Disqualified studies were excluded. Odds ratios of PLCE1 rs2274223 genotype distributions in the group of patients with esophageal cancer and the group of healthy control were calculated. The metaanalysis software, RevMan5.0, was applied for heterogeneity test, pooled OR and 95% confidence intervals. Sensitivity analysis and publication bias were also explored. Results: A total of twelve case-control studies were included, covering a total of 9, 912 esophageal cancer cases and 13, 023 controls were included. The pooled odds ratio of PLCE1 rs2274223 genotype GA vs AA was 1.29 (95%CI=1.17~1.43), p<0.01, GG vs AA was 1.65 (95%CI=1.32~2.05), p<0.01, GG/GA vs AA was 1.30 (95%CI=1.16~1.46), p<0.01 and GG vs GA/AA was 1.48 (95%CI=1.22~1.80), p<0.01. The PLCE1 rs2274223 polymorphism was thus associated with risk of esophageal cancer in all genetic models. In the stratified analysis by ethnicity, and source of controls, no significantly increased risk was observed for white persons. There was no obvious publication bias detected. Conclusions: This meta-analysis showed there was a significantly association between PLCE1 rs2274223 polymorphism and esophageal cancer in yellow race populations. Due to some minor limitations, our findings should be confirmed in further studies.

• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.41-49
• /
• 2012

The objective of this study is for development of the reference Korean female phantom, HDRK-Woman. The phantom was constructed by adjusting a Korean woman voxel phantom to the Reference Korean data. The Korean woman phantom had been developed based on the high-resolution color slice images obtained from an adult Korean female cadaver. There were a total of 39 organs including the 27 organs specified in ICRP 103 for effective dose calculation. The voxel resolution of the phantom was $1.976{\times}1.976{\times}2.0619\;mm^3$ and the voxel array size is $261{\times}109{\times}825$ in the x, y and z directions. Then, the voxel resolution was changed to $2.0351{\times}2.0351{\times}2.0747\;mm^3$ for adjustment of the height and total bone mass of the phantom to the Reference Korean data. Finally, the internal organs and tissue were adjusted using in-house software program developed for 3D volume adjustment of the organs and tissue. The effective dose values of HDRK phantoms were calculated for broad parallel photon beams using MCNPX Monte Carlo code and compared with those of ICRP phantoms.

• Journal of Distribution Science
• /
• v.14 no.7
• /
• pp.71-81
• /
• 2016

Purpose - Because creativity, which is an intangible resource embedded within the company, can offer a competitive advantage, most companies have an interest in promoting creativity among their employees and division(e.g., marketing organization). Creativity renders a sustainable competitive advantage to a firm because it is a strategic resource that is valuable, flexible, rare, and imperfectly imitable or substitutable. Although most companies broadly recognize the importance of creativity, the methods for developing creativity remain elusive. Therefore, the present study investigates how to structure incentives to motivate employees to be more creative and how to develop tools to facilitate creativity. In detail, the present study aimed to examine the relationship between the regulatory focus of marketing organizations(e.g., promotion focus vs prevention focus) and creativity of marketing organizations. In addition, the present study set out to examine the moderating role of interaction of financial reward and creative training in addition to investigating the direct relationship between creativity and regulatory focus in New Product Development(NPD) context. Research design, data, and methodology - The data used to test the hypotheses are drawn from a survey of full time NPD project members(including project manager, designer, engineer, and marketer). The present study utilized data obtained mainly from a database compiled by the Korea Investors Service-Financial Analysis System which provides comprehensive corporate and financial information on firms listed on the Korea Stock Exchange. A study population comprising 1,000 South Korean firms was obtained from this database. We selected 864 firms from the database, and the firms have experiences of new product development project. We collected a total of 162 responses, for a 18.8% response rate. After we excluded 14 questionnaire because of incomplete responses, a total of 148 questionnaire remained(final response rate: 17.1%). Working with a sample of 148 responses in South Korea, hierarchical moderated regression is employed to test research hypotheses(

The relationship between promotion focus and creativity of marketing organization,

The relationship between prevention focus and creativity of marketing organization,

The moderating effect of joint influences(interaction between financial rewards and creativity training) on the relationship between promotion focus creativity of marketing organization,

The moderating effect of joint influences(interaction between financial rewards and creativity training) on the relationship between prevention focus creativity of marketing organization). SPSS 18.0 and AMOS software were used in the data analysis. Results - The empirical study confirmed that promotion focus of marketing organization is positively related to creativity of marketing organization. Also, prevention focus of marketing organization is positively affected to creativity of marketing organization. In addition, the interaction between financial rewards and creativity training moderated the relationship between regularity focus(e.g.), promotion focus vs prevention focus) and creativity of marketing organization. These results suggest that managers can improve the performances of their creative efforts by providing the use of financial rewards and creativity training in combination. Conclusion - Based on results of this study that examine the effects of regulatory focused creative efforts on creativity of marketing organization, promotion focus is helpful with marketing organizations to enhance their service innovation and performance. Prevention focused organization should allow monetary rewards and creativity training to increase their creativity for innovation of new products.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.1
• /
• pp.64-74
• /
• 2016

Objectives: The purpose of this study was to investigate whether chemical exposure among workers has relevance to dyspnea using data from the $3^{rd}$ Korea Working Conditions Survey. Methods: The research subjects were 29,711 wage workers. Chemical exposures consist of four factors, (1) breathing in vapors, fumes, dust and dirt, (2) breathing in organic solvent vapors, (3) handling or touching chemicals, and (4) secondhand smoke. Multiple logistic regression analysis was performed to examine the association between chemical exposure and dyspnea in the last 12months using proc surveylogistic in SAS 9.3 statistical software excluding people who had received a diagnosis of hypertension or obesity that can affect the respiratory distress symptoms(n=27,842). Results: Chemical exposure among workers was associated with dyspnea after adjustment for demographics and job characteristics. Prevalence of dyspnea was 4.9 per 1,000 among men and 5.8 per 1,000. Compared to a total score of 0 points of chemical exposure among workers, a total score of 1, 2-3, and 4 points tended to have increased risk of dyspnea in a dose-response manner for both men (OR=1.43, 1.93, and 4.26; P-for trend=0.002) and women(OR=1.10, 2.81, and 7.70; P-for trend=0.002). Stratified analysis by duration of current job showed that the association between chemical exposure and dyspnea tended to get stronger until 15 years and then disappeared afterwards, which reflects healthy worker survivor effect. Conclusions: We observed significant association between chemical exposure and dyspnea using the data of the $3^{rd}$ Korea Working Conditions Survey. Our results warrants providing knowledge related to chemical exposure, performing prevention activities, and creating various health policies to protect workers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.516-530
• /
• 1999

The current clinical technique for occlusal vertical dimension recording is based on marking the skin reference points on the patient's face and measuring between these points using caliper-like device. And it is difficult to achieve reliable measurements by this technique because of movable soft tissue. The purpose of this study is to reveal the stability of skin reference points by comparing the relative movement between extra-oral skin reference points and intra-oral reference points using X-ray fluoroscope. 10 test subjects were divided into 2 groups : Group I (natural dentition) and Group II (denture-wearer whose vertical dimension was lost) and Group III consists of identical test subjects to Group II with their upper denture removed and record base inserted. Attaching the 3 mm diameter steel ball to nose tip, lower lip, chin and to existing denture (or record base), fluoroscopic examination and recording were taken during 2 jaw opening and closing movements. After subsequent digitization using personal computer, 1219 still pictures with 0.1 second interval were made. Using the 2 dimensional graphic software, measurements between reference points were executed. Dividing the entire jaw movement into 3 ranges (total, 1st half opening, 2nd half opening), rate of movement and relative movement between extra-oral and intra-oral reference points were calculated and statistically analyzed. The results of this study are as follows. 1 Within the same experimental group, no statistical difference was found in the stability of skin reference between lower lip point and chin point during total range of jaw opening and closing movement (p>.05) 2. In the first half range of jaw opening, statistical difference was found between Group I (natural dentition) and Group II (denture wearer) (p<.05) Group I has greater skin reference stability than Group II. 3. In the first half range of jaw opening, statistical difference was found between Group I and Group III (record base wearer) (p<.05). Group I has greater skin reference stability than Group III. 4. In the first half range of jaw opening, no statistical difference was found in the stability of skin reference between Group II and Group III (p>.05). 5. In the second half range of jaw opening, no statistical difference was found in the stability of skin reference between any experimental groups (p>.05). 6. In patients with their occlusal vertical dimension lost, employing other measuring references rather than skin is recommended because of low stability.