• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.58-71
• /
• 2015

Objectives: The aims of this study were to investigate the classification system of chemical substances in the Occupational Safety and Health Act(OSHA) and Chemical Substances Control Act(CSCA) and to compare several health indices (i.e., Time Weighted Average (TWA), Lethal Dose ($LD_{50}$), and Lethal Concentration ($LC_{50}$) of chemical substances by categories in each law. Methods: The chemicals regulated by each law were classified by the specific categories provided in the respective law; seven categories for OSHA (chemicals with OELs, chemicals prohibited from manufacturing, etc., chemicals requiring approval, chemicals kept below permissible limits, chemicals requiring workplace monitoring, chemicals requiring special management, and chemicals requiring special heath diagnosis) and five categories from the CSCA(poisonous substances, permitted substances, restricted substances, prohibited substances, and substances requiring preparation for accidents). Information on physicochemical properties, health indices including CMR characteristics, $LD_{50}$ and $LD_{50}$ were searched from the homepages of the Korean Occupational and Safety Agency and the National Institute of Environmental Research, etc. Statistical analysis was conducted for comparison between TWA and health index for each category. Results: The number of chemicals based on CAS numbers was different from the numbers of series of chemicals listed in each law because of repeat listings due to different names (e.g., glycol monoethylether vs. 2-ethoxy ethanol) and grouping of different chemicals under the same serial number(i.e., five different benzidine-related chemicals were categorized under one serial number(06-4-13) as prohibited substances under the CSCA). A total of 722 chemicals and 995 chemicals were listed at the OSHA and its sub-regulations and CSCA and its sub-regulations, respectively. Among these, 36.8% based on OSHA chemicals and 26.7% based on CSCA chemicals were regulated simultaneously through both laws. The correlation coefficients between TWA and $LC_{50}$ and between TWA and $LD_{50}$, were 0.641 and 0.506, respectively. The geometric mean values of TWA calculated by each category in both laws have no tendency according to category. The patterns of cumulative graph for TWA, $LD_{50}$, $LC_{50}$ were similar to the chemicals regulated by OHSA and CCSA, but their median values were lower for CCSA regulated chemicals than OSHA regulated chemicals. The GM of carcinogenic chemicals under the OSHA was significantly lower than non-CMR chemicals($2.21mg/m^3$ vs $5.69mg/m^3$, p=0.006), while there was no significant difference in CSCA chemicals($0.85mg/m^3$ vs $1.04mg/m^3$, p=0.448). $LC_{50}$ showed no significant difference between carcinogens, mutagens, reproductive toxic chemicals and non-CMR chemicals in both laws' regulated chemicals, while there was a difference between carcinogens and non-CMR chemicals in $LD_{50}$ of the CSCA. Conclusions: This study found that there was no specific tendency or significant difference in health indicessuch TWA, $LD_{50}$ and $LC_{50}$ in subcategories of chemicals as classified by the Ministry of Labor and Employment and the Ministry of Environment. Considering the background and the purpose of each law, collaboration for harmonization in chemical categorizing and regulation is necessary.

• (The) Research of the performance art and culture
• /
• no.37
• /
• pp.187-221
• /
• 2018

The style of performance to contemporary nongak is not fixed in a specific period of time, but in conjunction with the total change in society that has occurred during its long time from traditional society to the modern times. It is important to recognize that the traditional performance art forms that we see and feel today, including nongak, are constantly interacting with the times and are a change in the design that has been shaped in the past. Now, we must get rid of the negative idea that there is some fixed prototype in Nongak. Also, the value and the need for preservation of current Nongak should not be evaluated according to the ' pure genealogy of village descent, ' which was possible only in villages with small population movements long ago. If can get rid of the stereotypes, can greatly expand the view that we read the values of a certain Nongak. Looking away from a few of these traditional fixed perceptions can significantly broaden the view of reading the winning values of some farmers ' songs. In this regard, this report determined the performing style and nature of Changwon's Toichon-noangak through a structural analysis of the Toichon-noangak in contemporary, and discussed the significance of the transmittion of Toichon-noangak. Changwon Toichon Nongak started out as an even-present ritual performance based on the religious nature of the village community and actively exchanged with the economic, social and cultural foundations of the Republic of Korea, which began to accumulate in the modern changes. Generally, the performance style of village Nongak has a combination of characteristics according to the ritual, Dure(collective labor), entertainment, and these three functions. Toichon Nongak is also a village Nongak style and in which of ritual nongak and village entertainment nongak are connected in parallel as one in the big total structure. The origin, background, purpose, and style of towing of Toichon noangak demonstrates that the Toichon noangak is originally ceremonial noangak derived from a prayer style of Dongje. Then, various factors influences are interacting with Toichon noangak within the orbit of modern society, such a style of playing, popular nongak, is believed to have undergone an extended change. Overall, Toichon nongak performance style can be called nongak, which maintains traditional customs and it also has the changed characteristics according to the times of village society.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2019.09a
• /
• pp.5-5
• /
• 2019

The objectives of this paper are (i) to analyze past trends and future directions of rice production, consumption and trade across the world and (ii) to discuss emerging challenges and future directions in the global rice industry. Rice is a staple food of over half of the world's 7.7 billion people. It is an important economic, social, political, and cultural commodity in most Asian countries. Rice is the $1^{st}$ most widely consumed, $2^{nd}$ largely produced, and $3^{rd}$ most widely grown food crop in the world. It was cultivated by 144 million farms in over 100 countries with harvested area of over 163 million ha producing about 745 million tons paddy in 2018. About 90% of the total rice is produced in Asia. China and India, the biggest rice producers, account for over half of the world's rice production. Between 1960 and 2018, world rice production increased over threefold from 221 to 745 million tons (2.1% per year) due to area expansion from 120 to 163 million ha (0.5% per year) and paddy yield increase from 1.8 to 4.6 t/ha (1.6% per year). The Green Revolution led massive increase in rice production prevented famines, provided food for millions of people, reduced poverty and hunger, and improved livelihoods of millions of Asians. The future increase in rice production must come from yield increase as the scope for area expansion is limited. Rice is the most widely consumed food crop. The world's average per capita milled rice consumption is 64 kilograms providing 19% of daily calories. Asia accounted for 84% of global consumption followed by Africa (7%), South America (3%), and the Middle East (2%). Asia's per capita rice consumption is 100 kilograms per year providing 28% of daily calories. The global and Asian per capita consumption increased from the 1960s to the 1990s but stable afterward. The per capita rice consumption is expected to decline in Asia but increase outside Asia especially in Africa in the future. The total milled rice consumption was about 490 million tons in 2018 and projected to reach 550 million tons by 2030 and 590 million tons by 2040. Rice is thinly traded in international market because it is a highly protected commodity. Only about 9% of the total production is traded in global rice market. However, the volume of global rice trade has increased over six-fold from 7.5 to 46.5 million tons between the 1960s and 2018. A relatively small number of exporting countries interact with a large number of importing countries. The top five rice exporting countries are India, Thailand, Vietnam, Pakistan, and China accounting for 74% of the global rice export. The top five rice importing countries are China, Philippines, Nigeria, European Union and Saudi Arabia accounting for 26% of the global rice import. Within rice varieties, Japonica rice accounts for the highest share of the global rice trade (about 12%) followed by Basmati rice (about 10%). The high concentration of exports to a few countries makes international rice market vulnerable to supply disruptions in exporting countries, leading to higher world prices of rice. The export price of Thai 5% broken rice increased from 198 US$/ton in 2000 to 421 US$/ton in 2018. The volumes of trade and rice prices in the global market are expected to increase in the future. The major future challenges of the rice industry are increasing demand due to population growth, rising demand in Africa, economic growth and diet diversification, competition for natural resources (land and water), labor scarcity, climate change and natural hazards, poverty and inequality, hunger and malnutrition, urbanization, low income in rice farming, yield saturation, aging of farmers, feminization of agriculture, health and environmental concerns, improving value chains, and shifting donor priorities away from agriculture. At the same time, new opportunities are available due to access to new technologies, increased investment by the private sector, and increased global partnership. More investment in rice research and development is needed to develop and disseminate innovative technologies and practices to overcome problems and ensure food and nutrition security of the future population.

• Korean Journal of Weed Science
• /
• v.13 no.4
• /
• pp.210-233
• /
• 1993

The herbicide has become indispensable as much as nitrogen fertilizer in Korean agriculture from 1970 onwards. It is estimated that in 1991 more than 40 herbicides were registered for rice crop and treated to an area 1.41 times the rice acreage ; more than 30 herbicides were registered for field crops and treated to 89% of the crop area ; the treatment acreage of 3 non-selective foliar-applied herbicides reached 2,555 thousand hectares. During the last 25 years herbicides have benefited the Korean farmers substantially in labor, cost and time of farming. Any herbicide which causes crop injury in ordinary uses is not allowed to register in most country. Herbicides, however, can cause crop injury more or less when they are misused, abused or used under adverse environments. The herbicide use more than 100% of crop acreage means an increased probability of which herbicides are used wrong or under adverse situation. This is true as evidenced by that about 25% of farmers have experienced the herbicide caused crop injury more than once during last 10 years on authors' nationwide surveys in 1992 and 1993 ; one-half of the injury incidences were with crop yield loss greater than 10%. Crop injury caused by herbicide had not occurred to a serious extent in the 1960s when the herbicides fewer than 5 were used by farmers to the field less than 12% of total acreage. Farmers ascribed about 53% of the herbicidal injury incidences at their fields to their misuses such as overdose, careless or improper application, off-time application or wrong choice of the herbicide, etc. While 47% of the incidences were mainly due to adverse natural conditions. Such misuses can be reduced to a minimum through enhanced education/extension services for right uses and, although undesirable, increased farmers' experiences of phytotoxicity. The most difficult primary problem arises from lack of countermeasures for farmers to cope with various adverse environmental conditions. At present almost all the herbicides have"Do not use!" instructions on label to avoid crop injury under adverse environments. These "Do not use!" situations Include sandy, highly percolating, or infertile soils, cool water gushing paddy, poorly draining paddy, terraced paddy, too wet or dry soils, days of abnormally cool or high air temperature, etc. Meanwhile, the cultivated lands are under poor conditions : the average organic matter content ranges 2.5 to 2.8% in paddy soil and 2.0 to 2.6% in upland soil ; the canon exchange capacity ranges 8 to 12 m.e. ; approximately 43% of paddy and 56% of upland are of sandy to sandy gravel soil ; only 42% of paddy and 16% of upland fields are on flat land. The present situation would mean that about 40 to 50% of soil applied herbicides are used on the field where the label instructs "Do not use!". Yet no positive effort has been made for 25 years long by government or companies to develop countermeasures. It is a really sophisticated social problem. In the 1960s and 1970s a subside program to incoporate hillside red clayish soil into sandy paddy as well as campaign for increased application of compost to the field had been operating. Yet majority of the sandy soils remains sandy and the program and campaign had been stopped. With regard to this sandy soil problem the authors have developed a method of "split application of a herbicide onto sandy soil field". A model case study has been carried out with success and is introduced with key procedure in this paper. Climate is variable in its nature. Among the climatic components sudden fall or rise in temperature is hardly avoidable for a crop plant. Our spring air temperature fluctuates so much ; for example, the daily mean air temperature of Inchon city varied from 6.31 to $16.81^{\circ}C$ on April 20, early seeding time of crops, within${\times}$2Sd range of 30 year records. Seeding early in season means an increased liability to phytotoxicity, and this will be more evident in direct water-seeding of rice. About 20% of farmers depend on the cold underground-water pumped for rice irrigation. If the well is deep over 70m, the fresh water may be about $10^{\circ}C$ cold. The water should be warmed to about $20^{\circ}C$ before irrigation. This is not so practiced well by farmers. In addition to the forementioned adverse conditions there exist many other aspects to be amended. Among them the worst for liquid spray type herbicides is almost total lacking in proper knowledge of nozzle types and concern with even spray by the administrative, rural extension officers, company and farmers. Even not available in the market are the nozzles and sprayers appropriate for herbicides spray. Most people perceive all the pesticide sprayers same and concern much with the speed and easiness of spray, not with correct spray. There exist many points to be improved to minimize herbicidal phytotoxicity in Korea and many ways to achieve the goal. First of all it is suggested that 1) the present evaluation of a new herbicide at standard and double doses in registration trials is to be an evaluation for standard, double and triple doses to exploit the response slope in making decision for approval and recommendation of different dose for different situation on label, 2) the government is to recognize the facts and nature of the present problem to correct the present misperceptions and to develop an appropriate national program for improvement of soil conditions, spray equipment, extention manpower and services, 3) the researchers are to enhance researches on the countermeasures and 4) the herbicide makers/dealers are to correct their misperceptions and policy for sales, to develop database on the detailed use conditions of consumer one by one and to serve the consumers with direct counsel based on the database.

• Journal of Intelligence and Information Systems
• /
• v.23 no.2
• /
• pp.39-70
• /
• 2017

Data-drive analytics techniques have been recently applied to public surveys. Instead of simply gathering survey results or expert opinions to research the preference for a recently launched product, enterprises need a way to collect and analyze various types of online data and then accurately figure out customer preferences. In the main concept of existing data-based survey methods, the sentiment lexicon for a particular domain is first constructed by domain experts who usually judge the positive, neutral, or negative meanings of the frequently used words from the collected text documents. In order to research the preference for a particular product, the existing approach collects (1) review posts, which are related to the product, from several product review web sites; (2) extracts sentences (or phrases) in the collection after the pre-processing step such as stemming and removal of stop words is performed; (3) classifies the polarity (either positive or negative sense) of each sentence (or phrase) based on the sentiment lexicon; and (4) estimates the positive and negative ratios of the product by dividing the total numbers of the positive and negative sentences (or phrases) by the total number of the sentences (or phrases) in the collection. Furthermore, the existing approach automatically finds important sentences (or phrases) including the positive and negative meaning to/against the product. As a motivated example, given a product like Sonata made by Hyundai Motors, customers often want to see the summary note including what positive points are in the 'car design' aspect as well as what negative points are in thesame aspect. They also want to gain more useful information regarding other aspects such as 'car quality', 'car performance', and 'car service.' Such an information will enable customers to make good choice when they attempt to purchase brand-new vehicles. In addition, automobile makers will be able to figure out the preference and positive/negative points for new models on market. In the near future, the weak points of the models will be improved by the sentiment analysis. For this, the existing approach computes the sentiment score of each sentence (or phrase) and then selects top-k sentences (or phrases) with the highest positive and negative scores. However, the existing approach has several shortcomings and is limited to apply to real applications. The main disadvantages of the existing approach is as follows: (1) The main aspects (e.g., car design, quality, performance, and service) to a product (e.g., Hyundai Sonata) are not considered. Through the sentiment analysis without considering aspects, as a result, the summary note including the positive and negative ratios of the product and top-k sentences (or phrases) with the highest sentiment scores in the entire corpus is just reported to customers and car makers. This approach is not enough and main aspects of the target product need to be considered in the sentiment analysis. (2) In general, since the same word has different meanings across different domains, the sentiment lexicon which is proper to each domain needs to be constructed. The efficient way to construct the sentiment lexicon per domain is required because the sentiment lexicon construction is labor intensive and time consuming. To address the above problems, in this article, we propose a novel product reputation mining algorithm that (1) extracts topics hidden in review documents written by customers; (2) mines main aspects based on the extracted topics; (3) measures the positive and negative ratios of the product using the aspects; and (4) presents the digest in which a few important sentences with the positive and negative meanings are listed in each aspect. Unlike the existing approach, using hidden topics makes experts construct the sentimental lexicon easily and quickly. Furthermore, reinforcing topic semantics, we can improve the accuracy of the product reputation mining algorithms more largely than that of the existing approach. In the experiments, we collected large review documents to the domestic vehicles such as K5, SM5, and Avante; measured the positive and negative ratios of the three cars; showed top-k positive and negative summaries per aspect; and conducted statistical analysis. Our experimental results clearly show the effectiveness of the proposed method, compared with the existing method.

• KDI Journal of Economic Policy
• /
• v.13 no.1
• /
• pp.65-113
• /
• 1991

Korea's rapid economic growth of the past thirty years was led by extremely fast export growth under extensive government intervention. Until very recently, the political regimes were authoritarian and oppressed human rights and labor movements. Because of these characteristics, many inside and outside Korea are under the impression that the rapid economic growth was made possible by the government's relentless push for export growth through industrial targetjng. Whether or not the government intervention was pivotal in Korean economic growth is an important issue because of its normative implications on the role of government and the degree of economic policy intervention in a market economy. A good example of industrial targeting policy in Korea is the "Heavy and Chemical Industry (HCI)" policy, which began in the early 1970s and lasted for one decade. Under the HCI policy the government intervened in resource allocation through preferential tax, trade, and credit and interest rate policies for "key industries" which included iron and steel, non-ferrous metals, shipbuilding, general machinery, chemicals, and electronics. This paper investigates the effects of. the HCI policy on the efficiency of capital and the export competitiveness of manufacturing industries. For individual three-digit KSIC (Korea Standard Industrial Classification) industries and for two industry groups, one favored by HCI Policy and the other not, this paper: (1) computes capital intensities and discusses the impact of the HCI policy on the changes in the intensities over time, (2) estimates the capital efficiencies and examines them on the basis of optimal condition of resource allocation, and (3) compares the Korean and Taiwanese shares of total imports by the OECD countries as a way of weighing the effects of the policy on the industries' export competitiveness. Taiwan is a good reference, as it did not adopt the kind of industrial targeting policy that Korea did, while the Taiwanese and Korean economies share similar characteristics. In the 1973-78 period, the capital intensity rose rapidly for the "HC Group" the group of industries favored by the policy, while it first declined and later showed an anemic rise for the "Light Group," the remaining manufacturing industries. Capital efficiency was much lower in the HC Group than in the Light Group, at least until the late 1970s. This paper acribes these results to excess investments in the favored industries and concludes that growth could have been faster in the absence of the HCI policy. The Korean Light Group's share in total imports by the OECD was larger than that of its Taiwanese counterpart but has become much smaller since 1978. For the HC Group Korea's market share was smaller than Taiwan's and has declined even more since the mid-1970s. This weakening in the export competitiveness of Korea's industries relative to Taiwan's lasted until the mid-1980s. This paper concludes that the HCI policy had either no positive effect on the competitiveness of the Korean manufacturing industries or negative effects.

• Journal of dental hygiene science
• /
• v.4 no.3
• /
• pp.117-126
• /
• 2004

For a month of September, 2004, a questionnaire regarding dental hygiene was distributed to 165 workers of Ulsan area. A total of 125 questionnaire were analyzed: 102 collected of the distributed 165 pieces, and 23 questionnaires reported by patients of a dental clinic in Dong-gu, Woolsan. The result is as follows; (1) Labor workers of Ulsan have thought that they are in good dental health, 44.1% of respondents, following by those who they believe they are in moderate health and those who they think are in poor condition. 89.0% of total workers have experienced dental treatment. (2) Regarding the location of dental treatment, 85.0% of respondents have pointed out dental hospitals and clinics, while 3.9% have indicated that they had treatment from unlicensed dentists. Specifically, workers in their 40s over have ever experienced dental treatment by unlicensed dentists. Those who think they are in poor dental condition have tended to have more dental treatment by unlicensed dentists. (3) Regarding the reason that they put off the treatment, 59.1% of respondents have indicated that they have no time to have the treatment, following by economic burden and the lack of confidence in dentists. When they have tooth aches or the gum ache, 60% of respondents have suggested that they endure the ache or take a medicine to alleviate the pain, showing a lower understanding of early dental treatment. (4) Regarding the reason why they are unwilling to go to dentists, respondents have revealed the anxiety against pain, 50.4%, following by the difficulty of scheduling and unsatisfied services. (5) 47.2% of respondents have brushed their teeth 3 times everyday, following by those who have done it 2 times a day and those one a day. Regarding how to brush the teeth, most of respondents have brushed their teeth in the upper, lower, and the both side, 61.4%. The younger respondents and those who think they are in good dental health have tended to brush their teeth up and down. (6) Regarding the cause of the gum disease, 67.7% of respondents have thought that it is caused by poor dental hygiene, following by natural occurrence due to age, hereditary nature, and physical predisposition. (7) 67.7% of respondents have experienced dental scaling, while 32.3% of them have had no experience in it. 53.5% of workers have thought that scaling may not be recommended since they have the teeth scaled periodically once they had dental scaling, a higher rate than 46.5% who think scaling is good for the gum health.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.3 no.2
• /
• pp.100-111
• /
• 1983

The research results reported herein had the objectives to understand and analyze the present problems of saemaeul woodland joint cattle grazing system in Kang Won Do and to take steps of improvement. The study results on actual management conditions, problems analyzed and improvement plan of total 208 joint cattle grazing area which was established 105 area in 1981 and 103 area in 1982 were summarized as follows: 1. the effectiveness of joint cattle grazing projects 1) Average daily weight gain of cattle during joint cattle grazing period was 0.4kg, showing higher daily than the conventional feeding of 0.33kg. 2) Increase of total farm income over the conventional feeding system were \1,031,357,320 during the grazing period from May to October in 1982 by adapting the 208 joint cattle grazing system, of which effectiveness of weight gain was \293,075,300 and labor saving was \543,838,750. 3) According to the results of questionaire investigation from 208 joint cattle grazing area, effectiveness of joint cattle grazing system over the conventional system were (1) labor saving, (2) feed cost saving, (3) reduced diseases, (4) increase of number of feeding, (5) inspiration of joint endeavor, (6) effect of more gain, (7) easiness of feeding and feed cost savings. 2. Problems of joint cattle grazing system. 1) Shortages of grass were a problem at second year of joint cattle grazing period due to the low regrowth rate of wild grass. 2) Proper land for woodland joint cattle grazing is belonging to land of Government ownership and it is very hard to get the permission from office of forestry for cattle grazing purpose. 3) It is also difficult to find a proper time of breeding in grazing area by the difficulty of estrus detection. 4) There are a difficulty to give a proper vaccination and medical examination for the grazing cattle. 3. Improvement plans for woodland joint cattle grazing projects. 1) Obtain sufficient roughages by hoof cultivation and oversowing pasture from the second year of joint cattle grazing period. 2) In order to increase the beef production and to use for a calf production area, Government should arrange that all proper grazing land of Government owned in Kang Won Do convert into woodland joint cattle grazing area. 3) Make a good reproductive record by mixed grazing with a excellent breeding cow in a remote area. And carry out the collective artificial insemination with synchronous puberty induced by injection of puberty stimulation hormone. 4) Make a preventive injection for blackleg, twice medication of fasciola hepatica in a year, and spray and medication of tick insecticide. 4. A policy towards upbringing of woodland joint cattle grazing area. 1) Government should thoroughly investigate about a proper land for woodland joint cattle grazing from all forests. 2) When the area is suitable for the woodland joint cattle grazing, though it is national forest or restricted area, government should make it possible to establish a grazing area. 3) On the proper land foe joint cattle grazing in the remote place, Government should support for the road construction and electric fence equipments by using of national funds. 4) There should be an administrative consideration for well promotion of the project that make woodland joint cattle grazing suitable to the characteristics of Kang Won Do. 5) In order to improve the reproduction record, Government should reform the insufficiency of artificial insemination in the joint cattle grazing area. 6) In order to maintain a proper price of cow, Government should carry out the price plan. 7) When there is any request for grassland formation in the woodland joint cattle grazing area, Government should permit it with preference.

• Research in Community and Public Health Nursing
• /
• v.14 no.2
• /
• pp.190-199
• /
• 2003

This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.