• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.108-114
• /
• 2012

Escalation method examining the changes in price index has been widely utilized in public construction projects. The previous escalation method determined estimated changes in price based on the average unit price of contract items over a period of time. In relation to this method, the issue has been raised that the fluctuation rates of previous method show different trends compared with other related price indices, as the influence of the small group of contract items with large unit prices overwhelms the others. This research suggested an improved escalation method which estimates the fluctuation rate by examining the changes in CCI (construction cost index) and applies it to the total amount or the partial amount deducted for labor cost in price escalation for previous bid price method. To verify the improvement, a case study is conducted on an educational facility, and the fluctuation rate was estimated in two different base periods (short term, long term). The results over the long term showed similar tendencies to those of related price indices, as well as significant differences in fluctuation rates compared to those of the previous method.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.45-57
• /
• 2015

Objectives: This study aims to compare the physicochemical characteristics, toxicological data with Occupational Exposure Limits (OELs) of chemicals under the Occupational Safety and Health Act(OSHA) regulated by the Ministry of Employment and Labor of Korea. Methods: Information on chemicals which have OELs on physicochemical characteristics and toxicological data was collected using Material Safety Data Sheet(MSDS) from Korea Occupational Safety and Health Agency(KOSHA) and the Korea Information System for Chemical Safety Management(KISChem) in 2014. Statistical analyses including correlation and simple regression were performed to compare the OELs with chemical characteristics including molecular weight, boiling point, odor threshold, vapor pressure, vapor density, solubility and octanol-water partition coefficient(OWPC) and toxicological data such as median lethal dose($LD_{50}$) and median lethal concentration($LC_{50}$). Results: A total of 656 chemicals have OELs under OSHA in Korea. The numbers of chemicals which have eight-hour time weighted average(TWA) and short term exposure limits(STEL) are 618 and 190, respectively. TWA was significantly correlated with boiling point and STEL was only correlated with vapor pressure among physicochemical characteristics. Solubility and OWPC between "skin" and "no skin" substances which indicate skin penetration were not significantly different. Both $LD_{50}$ and $LC_{50}$ were correlated with TWA, while the $LC_{50}$ was not with STEL. As health indicators, health rating and Emergency Response Planning Guidelines(ERPG) rating as recommended by the National Fire Protection Association(NFPA) and American Industrial Hygiene Association(AIHA) were associated with OELs and reflect the chemical hazards. Conclusions: We found relationships between OEL and chemical information including physicochemical characteristics and toxicological data. The study has an important meaning for understanding present regulatory OELs.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.23-31
• /
• 1988

A total of 320 Larix leptocepzs Trees growing in Kyonggi and Kangwon Province were examined to estimate tree volume and height with DBH and age. The criteria of selecting the "best" regression equation were based on coefficient of determination, $R^2$, adjusted standard error, I, and the ease of application. From the results obtained in this study, the method of estimating tree volume and height with DBH and age showed the following advantages ; 1. Since no measurement of tree height is needed, it saves time and labor in forest survey. 2. It has the ease of application because age is determined directly in artificial forests. 3. Volume and height can be estimated more easily and accurately with DBH and age than other methods.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.3
• /
• pp.156-161
• /
• 2011

Objectives: Tetrahydrofuran (THF) is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. THF has been used as a solvent and a precursor for various syntheses of polymers. However, THF is known to irritate to the eyes, skin and mucus membranes. Overexposure by inhalation, ingestion or skin contact may produce nausea, dizziness, headaches, respiratory irritation and possible skin burns. The purpose of this study is to evaluate of the worker exposure and characteristics of workers in the workplaces that use or manufacture THF. Methods: Sixteen factories in Korea, which manufacture or use THF, were selected for this study and a total of 130 air samples including 104 time-weighted average (TWA) samples and 26 short-term exposure limit (STEL) samples, were collected. Air samples were collected with charcoal tube (100mg/50mg) and analyzed by gas chromatograph/flame ionization detector(GC/FID). Results: The TWA concentration of THF was 16.05ppm (GM) at PS script printing, 2.32ppm (GM) at PVC stabilizer, 1.03ppm (GM) at Lithium triethylborohydride, 0.63ppm (GM) at Polytetramethylene ether glycol(PTMEG), 0.42ppm (GM) at Manufacturing THF, 0.13ppm (GM) at Glue and 0.12ppm (GM) at synthetic rubber/resins. Two out of sampes for PS script printing exceeded 50ppm as 8-hour exposure limit of MOEL. The short term exposure to THF was 54.77ppm (GM) at PS script printing, 17.10ppm (GM) at PTMEG, 13.76ppm (GM) at Manufacturing THF, 2.86ppm (GM) at Lithium triethylborohydride, 0.87ppm (GM) at synthetic rubber/resins and 0.13ppm (GM) Glue. We found that the highest exposure process for both the TWA and STEL samples was PS script process. Two samples exceeded 100ppm as short term exposure limit of Ministry of Employment and Labor(MOEL). Conclusions: Characteristic of STEL concentration for THF is considerably different from TWA concentration in workplaces because workers could exposure high concentration of THF in a moment when they work irregularly schedule. So exposure controls for momentary works have to be prepared, and considered the skin absorption and inhale of THF.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.1
• /
• pp.73-85
• /
• 2017

The purpose of this study is to investigate the effect of career uncertainty and career education on entrepreneurship and entrepreneurial intention of potential entrepreneur in Korea. A total number of 381 potential entrepreneurs responded to the questionnaire. The collected data were analyzed by SPSS Statistics 22. The results of the empirical analysis are as follows: First, career uncertainty did not have a significant effect on entrepreneurial intention. Second, career uncertainty had a negative(-) effect on entrepreneurship. Third, career education had a negative(-) effect on entrepreneurial intention. Fourth, career education did not have a significant effect on entrepreneurship. Fifth, career uncertainty had a negative(-) effect on self-determination. Sixth, self-determinism was found to fully mediate the relationship between career uncertainty and entrepreneurial intention. Seventh, self-determination was found to fully mediate the relationship between career uncertainty and entrepreneurship. Based on these results, it is necessary to expand and strengthen the scope of career education of students by lowering the uncertainty of career and reinforcement of intrinsic motivation through self-determination in order to improve student's entrepreneurship and entrepreneurial intention. At the same time, institutional efforts to include entrepreneurship education in career education should be concurrently accompanied by efforts to improve self-determination of potential entrepreneurs.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.6
• /
• pp.55-66
• /
• 2011

The purpose of this study was to develop an efficient process in the design and construction of a 1:5 scale 10-story R.C. apartment building model for an earthquake simulation test. The reduction ratio of the specimen was determined by the size ($5m{\times}5m$) and pay load (600kN) of the available shaking table and the availability of model reinforcements. For efficiency and quality control of the reinforcement work, prefabrication was used. Construction was conducted in two steps, the wall in one step, and another step for the slab, because it was impossible to remove the formwork of a wall if the walls and slabs in a story were constructed in one step. The slip form construction method was used repetitively for walls. The formwork of a wall was made with veneer and acryl plate on each side, so it was possible to check the quality of the concrete placing. To construct this model, it took roughly six months with five full-time research assistants, for a total of 602 man days of labor in construction.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.357-364
• /
• 1988

By implementing epoch-making policies for industrial promotion, the national economy has made a remarkable development. As a result of such economic growth, industrial accidents and occupational diseases have become a serious problem in Korean society. In the presidential order for the execution of the Korean Labor Standard Law, neuritis and other diseases stemming from health impairments due to vibrations in industrial processes are designated to be dealt with as vibration diseases. In the case of vibration disease, industrial accident compensation is not effectively paid. In order to investigate the vibration hazards of rock-drill operation, the authors studied the subjective symptoms and performed physical function tests on a total of 79 persons (vibration exposed group) who used rock-drills, and 39 persons (control group) who did not use rock-drills at anthracite mines. The results of the physical function test were as follosws : 1. The right hand was more affected by white finger than the left hand. 2. Independent variables such as duration of rock-drill operation, age, drinking and smoking were indentified as statistically significant factors for the occurrence of white finger. 3. In the pain sense threshold, the group with Raynaud's phenomenon showed a statistically higher level than that of the control group. 4. The skin temperature of the group with Raynaud's phenomenon was lower than that of the control group. The recovery time of skin temperature aftr cooling was delayed compared with the value of the control group.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.111-121
• /
• 2007

Diagnosis and Prediction of urban industrial structure is a key subject for establishment of sustainable urban development plan. By this time, studies of industry-related urban spatial structure have been concentrated on measurement of space distribution by industry type mainly using data about urban industries or total worker numbers. Now, status of workers become an important issue so this study analyzed qualitative change of urban industrial structure in the view of space using work status classification system. For that, data for work status in 1994 and 2004 were collected in towns and villages, and space analysis units were coincided based on change data between 1994 and 2004. Then, it analyzed spatial distribution pattern of employment through qualitative standard called work status using GIS. The analysis results by work status type of Busan industrial structure in GIS circumstance were as below. First, traditional labor intensive industries met a limit and service and wholesale/retail sale industries went to be poor livelihood. Therefore, Busan's employment rate should be decreased and worker numbers were statistically increased, however, irregular and non-wage workers were suddenly increased. So, it was determined that the quality of employment in Busan area came down. Second, a traditional downtown area has dwindled; on the other hand, employment has been increased in new town or new industrial complex and in the area developed services rather than the manufacturing industry. It is expected that the result of this study may be meaningful as data to prepare for longterm industrial development plan through qualitative evaluation called work status as well as to make behavior pattern of industrial structure which is basis of urban development.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2016

Although chemical fertilizers have a quick effect and broad applicability to agricultural fields, they have caused many problems like increasing soil acidity or decreasing soil organic matters. Environmental-friendly agriculture has been attempted in various ways such as organic agriculture, natural farming, low input and sustainable agriculture. The common interest of all environmental-friendly systems is to decrease burden to agricultural environment by low input of agricultural labor and materials. This study was conducted to estimate overwintering capacity and genetic distance among Chinese Milk Vetch (Astragalus sinicus, CMV) collections based on morphological characteristics and AFLP (Amplified fragment length polymorphism) analysis. Furthermore, the effect of CMV as green manure was observed in mix-cultured paddy fields with rice, sesame and sweet-potato. An another objective of this study was also to compare the pattern of weed occurrence in paddy fields with or without CMV and different rice transplanting times. The CMV collected from Paju district in central region of Korea was successively occurring through self-reseeding without artificial management. However, there was no noticeable difference in growth habit between Paju native CMV and introduced CMV from China which is currently used in farm fields. On the basis of multi-dimensional scaling and tree analyses, there are no significant difference of agricultural growth characteristics among Paju and chinese collections only excepting leaf angle and root length. The flowering time of Gurye collection was fast for 1 week as compared to other collections. AFLP that was commonly used for plant classfication, was applied to exam the genetic variation of CMV collections. Total 579 PCR products and 336 polymorphic fragments were generated using 8 primer pairs.

• The Journal of the Korean Society for Microbiology
• /
• v.3 no.1
• /
• pp.15-23
• /
• 1968

For the effective control of Syphilis, many investigators have developed a more rapid, simple and economical screening serological test which is adequately sensitive and specific. To fulfill the requirements of a more rapid serologic test for syphlis, a substitute for the conventional serum specimen was needed since considerable time and labor are involved in the processing of blood to serum. Burdon suggested the use of plasma in the serologic tests for syphilis as a substitute for serum. He noticed that plasma was more sensitive than serum in the Kline and Kahn tests, and attributed this to the presence of more antibody-like substance, "reagin" in plasma than in serum. However, to make plasma sufficiently sensitive, it was necessary to inactivate plasma by heating at a temperature of $56^{\circ}C$ for about 30 minutes. Heating of plasma resulted in the precipitation of fibrinogen which made centrifugation necessary to obtain dear plasma. Since the chief disadvantage to the use of unheated plasma(or serum) was a reduction in sensitivity of results-which probably was due to a labile factor such as complement-Portnoy et al began to consider rapid chemical methods of inactivation of plasma(or serum). They experienced that choline chloirde was shown to be anticomplementary which suggested its use as an inactivating agent for unheated plasma(or serum). In 1959 Portnoy et al reported the Rapid Plasma Reagin(RPR) Test for syphilis which is a more rapid, economical and simple. But still this test has many disadvantages as a rapid performing, field and office procedure, because it requires the usual laboratory equipments such as centrifuge, rotating machine, microscope etc. To substitute these disadvantages of the RPR test, in 1962, Portnoy et al developed the Rapid Plasma Reagin(RPR) card test for syphilis, which has the following advantages: a) Simplicity and rapidity of performance, b) Requires no laboratory equipments, c) Stable antigen suspension, d) Adequate sensitivity and specificity. This RPR card test can be used as a rapidly performing and screening test in field investigation, outpatient clinics, small laboratories and hospitals doing limited syphilis serology, and predonor in blood bank. Private clinic which has limited laboratory equipment and technic for syphilis serology can also use this RPR card test as a tool in the rapid diagnosis of syphilis. It was thought that this RPR card test is a useful tool in Korea for private physician and mass survey for syphilis diagnosis. But Portnoy patented the reagents needed for the performing the RPR card test. Therefore authors developed newly the reagents and according to Portnoy's method evaluated the newly developed. RPR card test compared with the VDRL, Kolmer CF, and RPCF tests. The RPR card and VDRL tests were performed plasma and serum from the total 1,132 cases. Among these 1,131 cases, 521 were syphilis suspected laboratory specimens, and 611 were syphilis unsuspected healthy young men. After screening with these two tests, the RPR card and VDRL tests, reactive specimens to the above one or both tests were retested by the Kolmer CF and RPCF tests.