• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.4
• /
• pp.551-562
• /
• 1999

This study was intended to investigate the effect on the human body such as subcutaneous fat thickness the circumference of extremities etc. of the clothing training of putting on thin clothes periodically from the cold period. The subjects were divided into the clothing training group and the non-training group, The training group was asked to wear cool clothes in daily life and to wear the training clothes of T-shirts with half-length sleeves and pants and perform the clothing training for two hours daily three times a week in a cold environment over the period from November to February. The non-training group was asked to lead a life wearing comfortable clothes. Then a comparative experiment was conducted at 15$\pm$1$^{\circ}C$, 50$\pm$5% R, H and 0.25m/sec before and after the clothing training. After the clothing training regardless of gender subcutaneous fat thickness was more increased and total clothing weight per the surface area of the body was decreased in the training group than the non-training group. The training group showed lower skin temperature in the limbs and lower average skin temperature than the non-training group irrespective of gender which proved the effect of the clothing training. The training group was shown to have attendancy toward a greater sense of warmth and a less sense of discomfort which proved the effect of the clothing training.

• Journal of the Korean Home Economics Association
• /
• v.36 no.4
• /
• pp.179-188
• /
• 1998

The purpose of this study was to determine the impact of demographics on body-cathexis and clothing expenditure of elderly men and women. Data were obtained from 50 men and 58 men and 58 women aged 55 years and older through an mail survey. Body-cathexis consisted of five areas of body parts: head/upper body, lower body, height, weight, and torso. Clothing expenditure was measured by the total dollar value of annual personal expenditures on personal apparel, including accessories, such as shoes, and clothing services. Demographics included income, age, education, sex, marital status, and social participation. Data were analyzed using multiple regression. The results showed that there were relationships between body-cathexis and four demographic variables(income, sex, education, and social participation). Elderly men were more satisfied with their bodies than were elderly women. The subjects with higher income, education, and social participation had a higher degree of body satisfaction. Also, there was a significant relationship between income and clothing expenditure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.2
• /
• pp.314-324
• /
• 1997

The purpose of this study was to evaluate the thermoregulatory response level on the heat and cold tolerance with investigating monthly changes of skin temperature in Koreans and to obtain the basal information for standard amount of clothing weight, indoor climate and working condition. Forty eight subjects in 5 age groups (6~11, 12~19, 20~44, 45~64, 65~76 years old) with both sexs were taken from Seoul and Kyunggi probince. All subjects were measured skin temperature, mean skin temperature, Total clothing weight in neutral condition in each month from June 1994 to May 1995. The results obtained are summarized as follows: 1. Skin temperature of all subjects was low on February, March and April, and was high on June, July and August. Temperatures of the torso (forehead and abdomen) and the lower limbs (leg and foot) were remarkably different. In general, most of skin temperatures except of hand, thigh and foot were higher in males. 2. Mean skin temperature was 0.5'c higher in males than female with ranging 32.5~34.5$^{\circ}C$ in males and 32.1~34.1$^{\circ}C$ in females. Also, mean skin temperature of 6~11 age group were higher than that of 45~ 64 age group in both sexs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.8
• /
• pp.1386-1397
• /
• 2001

The purpose of this study was to classify and analyze the somatotype of early middle-aged women and to provide its total data for clothing construction, and to improve clothing culture. The subjects were 277 early middle-aged women between 35 and 44 years old. Data were collected through anthropometry and photometry and analyzed by factor analysis, cluster analysis and discriminant analysis. The results were as follows; 1. The result of factor analysis indicated that 10 factors were extracted through factor analysis and those factors comprised 86.13 percent of total variance. 2. Using factor scores, cluster analysis was carried out and the subject were classified into 4 cluster. Type 1 is tall, slim, and X type in front. Type 2 is standard height and weight, short upper body, and hip-protruded on the side. Type 3 is standard height, thin, H type in front, back and hip are clearly protruded, and lean-back type on the side. Type 4 is standard height, fat, and long upper body. 3. According to the stepwise discriminant analysis, the 8 important iems is classifying the somatotype of early middle-aged women are as follows : bust girth, back length hip breadth-waist breadth, back protruded point depth(back)-back waist depth(back), hip tangent tilt, hip depth(back) waist dapth(back), bust depth-waist depth, and cervical hight, The correct classification rate for these items is as exact as 83.20%.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.52-61
• /
• 2023

This study aimed to present data for the development of a shoe which is suitable for plus-size men (BMI 25kg/m² or higher) and to analyze the characteristics of each type of foot. The results of the study are as follows. To assess foot shape in relation to weight gain, participants were categorized into normal weight, overweight, and obese weight groups, according to their BMI indexes. Those in the normal weight group exhibited a smaller value than the overweight or obese weight group in all items. As a result of the cluster analysis, by type of foot, of the obese men category, men were classified into four BMI index groups: members of the type 1 group had a BMI index of 157 (18.4% of total sample), while for type 2 the figure was 213 (25.0% of sample), for type 3 it was 259 (30.4%), and for type 4 it stood at 224 (26.3% of total sample). Those from the type 1 group had thin ankles with narrow toes and flattened sides. Type 2 group members had thick ankles with well-developed outer feet and thick sides. Those within the type 3 group had medium-thick ankles with narrow feet but wide inner feet. Finally, those in the type 4 group had feet with a slanted side, as well as thick ankles, wide feet, and flat sides. Among these categories, the type 3 group members indicated the highest distribution.

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.81-88
• /
• 2018

Air and ultra lightweight aerogels were used to lighten the weight of the firefighters' protective clothing. In order to lighten the firefighters' protective clothing composed of 3 layers (outer shell, mid-layer, lining), it was most effective to replace the lining which occupied the largest weight in the total weight with the new materials. Thermal protective performance tests were carried out on flame (ASTM D 4108), radiant heat (KS K ISO 6942) and mixing heat (KS K ISO 17492) of flame and radiation. When the lining felt was replaced with an air layer, the air layer must be at least 3 mm to meet the KFI and ISO standards for the thermal protective performance. However, even if the thickness of the air layer increased to 10 mm, the thermal protective performance was lower than that of the existing products. When the felt was replaced with aerogels, the TPP rating (ASTM D 4108) satisfied the KFI standard at the 2 mm thickness of the aerogels. When the thickness of the aerogels was 3 mm, the TPP rating was improved about 140% compared to the existing products. It was confirmed that not only weight reduction but also thermal protective performance was improved by use of aerogels. However, due to the fragile nature of aerogels, a method of fixing them to a constant thickness between layers constituting a firefighters' protective clothing should be considered in the future.

• Korean Journal of Human Ecology
• /
• v.18 no.1
• /
• pp.145-155
• /
• 2009

The purpose of this study is to examine the university students' awareness and attitudes on functional clothing materials, and to explore the effects of subjects' characteristics on the relationship between their attitudes to and images of the functional clothing materials. A total of 500 questionnaires were distributed to university students and 409 of which were used in data analysis. The data were statistically analyzed by frequency, factor analysis, reliability analysis, correlation analysis, t-test, ANOVA. The results were as follows: students thought that the first and foremost 'function' of functional clothing materials is their light-weight. The functions that consumers practically demanded are water-repellency and high absorbency & quick drying. It showed that students have an image that functional clothing materials have special, good and satisfactory qualities. Goretex and Coolmax were the most selected as brands of functional clothing materials which students knew. Attitudes to functional clothing materials revealed positively in the cognitive, behavioral and affectional attitudes. The attitudes had no significant differences according to sex and their major, but they had significant differences by subjects' amount of allowance, frequency of sports participation and sports ability. In other words, the more amount of allowance they get, the more frequently students do exercise, and the higher sports ability they have, the more positive attitude they have. The study says, in conclusion, that their conception of functional clothing materials has positive relations with their attitudes toward them.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.8 s.145
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.40-44
• /
• 2006

This study is on the brassiere of reduce clothing pressure. To set the measurements of bras for women in their 20s, considering the comfortableness in wearing and tightness, this paper conducted a questionnaire survey concerning breasts and bras as well as measurements of body and contact surface pressure. As a result of comparing the discrepancies between the lower chest circumferences of the body and the bra, it was revealed that 67.0% were wearing one that was bigger than the body size. Most of them mentioned 'feeling of tightness' as a reason(60.4%), which suggests there are problems of the total length and elasticity in the process of making bras. The favorite bra types are wire type(57.9%), mold type(24.3%), and strapless type(10.4%).it is recommended that the total length of lower chest circumference be increased. The result and the recommendations of this study are as follows: First, the total length of brassiere be increased by 5cm from the current patterns in the process of manufacturing. Second, elasticity of the lower-side tapes be extended from 120% to 170%.