• Journal of the Korean Society of Costume
• /
• v.57 no.4 s.113
• /
• pp.9-17
• /
• 2007

Somatotype is human body shape and physique type which can be classified not only by the size, but also by the shape or posture of the body. Postural variations in the alignment of the back, shoulder, and neck can have an adverse effect on the fit of garments designed to hang from the shoulders. There have been some previous studies about the lateral upper torso by analyzing photographic measurements. In this study, 3D body scan images were used to classify the side somatotype of upper lateral method even though they are major data in the classification of upper torso. This study focused on following objective.; 1) To apply new and developing technology into the apparel industry analyzing 3D body scan images. 2) To classify upper laterla torso using the data through the new improver technology, 3D body scanner. 3) To propose basic materials for well fitted garments for each type of figure. The test subjects for this study were two hundreds nine female aged 19 years and up who were recruited in Cornell university body scan research team. Seventeen Variables(12 angles, 5 lengths) out of 3D body scan data were measured based on these landmarks and applied to analyze. The result of factor analysis indicated that 6 factors were extracted through factor analysis and orthogonal rotation by the method of Varimax and those factors comprise 62.5% of total variance. And the somatotype of upper body is classified into 3 types of figures according to cluster analysis; Bent forward posture, Straight posture, Swayback posture. Future study could be addressed about the somatotype of body by the age group based on the large database with wide variety of age.

• Fashion & Textile Research Journal
• /
• v.17 no.3
• /
• pp.447-461
• /
• 2015

The purpose of this study is to develop a torso pattern that is highly representative for the proper body shape of women in their thirties. Size data of the women with age of 30 through 39 from the database of Size Korea 2004 were used for the study. In order to develop a master pattern which will be used as the benchmark for grading of research group, 4 existing torso block drafting methods were compared based on the data gathered and the block with the highest evaluation score was utilized as a reference point. For the analysis, data was divided into four types, only the data of 138 subjects which were evaluated at least by four or more experts as valid were used for the study. The major results can be summarized as follow. The women of bust girth of 91cm and height of 160cm which was turned out to be representative type of research group were used as standard measurement for the purpose of reflecting not only curve length of the 3D analysis measurement but also the difference between front and back thickness to the pattern. Dart locations were set based on front and back torso ease, shoulder area revisions, front sagging length 1.5cm and cross section crevice length analysis. According to the experts' appearance evaluation of the pattern was found to be better than the control pattern which was regarded as the best among 4 patterns created based on existing torso block drafting methods.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.1
• /
• pp.67-80
• /
• 2002

An efficient torso pattern has been developed to cope with the future trend of order-based, individualized production like the E.C.(Electronic Commerce) in the apparel industry, and to make a database foundation of automatic garment pattern drafting. For this purpose, a non-contact three-dimensional anthropometric measurement system was used to provide a lot of accurate body data for better individual fit, and an automatic pattern drafting system that can easily generate various size patterns and construct a pattern database has been developed too. The subjects of this research were 18 to 24 year-old women whose data had been gathered through the Korean national investigation of anthropometry for industrial standards in 1997 and various body shapes were analyzed by the measurements. And a special software system has been developed to verify the validity of newly proposed drawing rules. The results of sensory evaluation for appearance and moving fitness of the new torso pattern showed a significant improvement in individual fit even for the figures with large deviation from standard shape compared with the results of the traditional one.

• Journal of the Korean Society of Costume
• /
• v.38
• /
• pp.279-288
• /
• 1998

The purpose of this paper was to find out obese women's respective characteristics of torso body shape. The subjects were 132 obese women for direct measurement and were 101 obese women for indirect measurement, age of 20~59. The criterial of obesity base on Rohrer index($\geq$1.6) and busts girth ($\leq$90). The results were as follows : 1) In comparison with the average body shapes in common body types, in 30's was bigger in the bust and waist girth than the different age groups. 2) According to the difference in the basic girth(bust and waist girth, hip and bust girth, hip and waist girth) the body types were classified 2 groups. Types 1 was large bust and slightly curved from waist to hip. Type 2 was large hip and larger in the curve from waist to hip than type 1.

• The Korean Journal of Community Living Science
• /
• v.22 no.1
• /
• pp.53-61
• /
• 2011

We have made knitwear in a different way from the typical woven pattern; it does not have the dart, even for women's tops. The purpose of this research was to compare the fit and appearance of the torso pattern for circular knitted fabric between virtual try-on garments and real garments. First, a woman in her 20's was scanned by a 3D body scanner, and thus producing a virtual avatar. I prepared knit patterns and created a torso pattern appropriate for circular knitted fabric. Next, I measured the body size of the avatar. The 2D patterns for the torso and sleeves were developed using the Yuka Super ALPHA : Plus. The 3D virtual garments were made from the imported 2D patterns and were then tried on the 3D virtual avatars. Finally, the fit of the real garments and the virtual garments was compared. While the shape of the virtual try-on garments were similar to the real garments, the folding and sagging were different. This study found the length was the same as woven wear. However the actual bust size and the clothing size were the same which is not a typical characteristic of woven wear. In the case of hem measurement, more space was needed than actual body size but less space was needed than in woven patterns.

• The Research Journal of the Costume Culture
• /
• v.30 no.6
• /
• pp.828-841
• /
• 2022

This study aims to develop a fitted torso pattern suitable for males in their forties and fifties who are obese-a group that accounts for more than fifty percent of men in this age group-using a 3D virtual fitting program. Size Korea's 2022 data for obese males in their forties and fifties is utilized for this study. In terms of the research method, a 3D program (CLO 3D) is used to implement the target group's various body types and to apply fitted torsos that enable verification and evaluation of the pattern's fit and ease. The characteristics of fitted torso patterns for obese bodies are as follows: the front centerline is a profile line; shoulder darts are added by reflecting waist-abdominal protrusion in the front panel; and shoulder, arm, waist, and center-back darts are constructed for the back panel. For obese bodies, the minimum circumference ease amounts should be approximately 6-7cm for the chest, 6cm for the waist, and 6-7cm for the hips. Based on an evaluation of the virtual fit of the developed fitted torso pattern, the data shows that a pattern (foundation) such as this is well suited for obese body types with an average of 4.67/5 points for reverse triangular obesity, an average of 6.67/7 points for log obesity, and an average of 6.69 points for the ease amount.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2024

This study investigated the usage and product conditions of clothing companies and online dummy companies for the development of fitting dummy for South Korean women's wear in their 50s and 60s. These women-targeted apparel companies mainly used nude-sized torso type and torso crotch type made of FRP material. The frequency of use of the dummies was high, while the user satisfaction was moderate. Users expressed dissatisfaction with the inaccurate reflection of the body shape according to the KS sizing system and the measurements such as the front and back intercye, upper arms, abdomen, crotch, and waist back length. Upon survey, 73.7% of the respondents answered that development of the dummy and the appropriate age for it is 50 to 54, and they preferred the torso crotch form. In the production of online dummy companies, the torso crotch type and torso type were most widely produced, and polyurethane, FRP, and recycled paper materials were used. The size of dummy was expressed in numerical type, and 6, 7, 8, 9, 10, 12, 14, 16, 18 and 44, 55, 66, 77, 88 were being produced. Even models of the same size had significant deviation, especially in the waist circumference. Also, there was no dummy reflecting 25%~75% center interval to the KS garment sizing standards of women in their 50s and 60s. Therefore, it is desperately necessary to develop a fitting dummy for KS clothing sizing system that reflect their body sizes and shapes.

• Journal of the Korean Home Economics Association
• /
• v.33 no.6
• /
• pp.255-268
• /
• 1995

The purpose of this study is to provide basic information for elderly women's clothing construction and to develop dress form that can reflect the characteristics of their bodies. Three hundred twenty subjects, between the ages of 60∼85, were chosen and the data were collected from 59 anthropometric measurements of each subject. Data were analyzed by factor analysis of principal component model, cluster analysis, analysis of variance and duncan test. The results are as follows : 1. A decrease in height, an enlargement of the waist and abdomen area, and a dropped bustline are characteristics of elderly women. The upper-torso droops as a ge increase 2. Seven factors were extracted from anthropometric measurements. Factor components were obesity, height, shoulder shaper, the center front bodice length, the center back bodice length, the bust and neck shape, the degree and level of scapular protusion. 3. After analyzing seven factors, four types were categorized.

• Korean Journal of Human Ecology
• /
• v.16 no.3
• /
• pp.577-585
• /
• 2007

This research aimed for 20 latter man whose body shape of torso alters remarkably to develop nipper pattern of running type considered characteristic of body shape of 20 latter man to keep rather balanced body shape against middle age when body shape changes extremely. 1. running type nipper pattern design. Pattern of running, lining and nipper were designed by flattening surface shell. A basis line of running pattern is completed by applying reduction ratio after 3 times of modification & complement based on surface shell. Nipper pattern is designed with design line set by a plaster cast based on running pattern line. Lining pattern is designed with lining design line set by a plaster cast based on running type outside material and nipper pattern. 2. Functional evaluation of research and commercial nipper. Functional inspection through dress test was applied 5point evaluation method and the result of functional inspection on the sight of a wearer is that research nipper(running reduction ratio 15%, nipper reduction ratio 18%) averaged more 4.8point but commercial nipper averaged less 1.8point in the aspect of 20 items such as wear sensibility, motional function and external appearance aesthetic. Research running type nipper scored high in order of motional function, looks of side, back, front and whole and wear sensibility. Functional inspection in the point of view of an observer is that research nipper(running reduction ratio 15%, nipper reduction ratio 18%) averaged over 4.8point and commercial nipper averaged under 1.9point in 17 items of external appearance beauty. Research running type nipper marked high in order of looks of back, whole, front and side.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.2
• /
• pp.224-236
• /
• 2020

In this study, the 4th (1997) and 6th (2013) direct measurements of Size Korea compared the changing shape of women between the ages of 12 and 18. Comparing the items of height and length, the height and shoulder height were significantly reduced, the waist height was not significantly different, and the height of the upper hip was significantly increased, resulting in a smaller upper torso ratio and a higher lower torso rate. The width and thickness associated with human obesity, the circumference items and obesity levels often increased significantly with the change of the times, indicating that the overall body size was increased and that the chest area was changed to a cylindrical shape with changes in the breast equilibrium. Comparing agespecific measurements with graphs analyzing the trend of change in growth, the results showed that the change in 1997 was minimal since age 14; however, a continuous increase was achieved in 2013 that corresponded to the age at which growth is complete. The results of these studies are expected to be used as basic data to predict pattern design, body implementation, and trends in shape changes for young women.