• 한국강구조학회 논문집
• /
• 제18권2호
• /
• pp.203-211
• /
• 2006

본 논문에서는 집중 비틂모멘트와 등분포 비틂모멘트가 작용하는 박벽개보의 뒴구속에 대한 영향을 고려할 수 있는 새로운 유효비틀림계수를 제시한다. 상용 유한요소 프로그램의 알고리즘을 바꾸지 않고 순수 비틀림계수 대신에 제안된 비틀림계수를 직접 사용할 수 있다. 유도된 비틀림계수는 순수 비틀림과 뒴 비틀림에 의한 영향을 고려하며 순수 비틀림계수에 보정계수를 곱하여 산정한다. 순수 비틀림의 경우 유도된 계수는 순수 비틀림계수와 일치하게 나타났다. 순수 비틀림을 이용하여 본 연구에서 유도한 유효 비틀림계수는 Elhelbawey 등이 제안한 비틀림계수와 차이를 보여주고 있다. 또한, 유효 비틀림계수를 사용하여 구한 최대비틀림각을 이용하여 부재 내 에 발생하는 전단응력과 다른 연구자의 결과들과 비교, 검토한다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.287-290
• /
• 2008

Resistance to lateral torsional buckling of steel I-girder (open section) is a very important design requirement. But, most studies of steel I-girder with corrugated webs were invested in shear behavior. Untill now, most studies about Lateral torsional buckling of I-girder with corrugated webs have been based on Lindner.J's study (Lateral torsional buckling of beamswith trapezoidally corrugated webs,1990). the study includes that the pure torsional constant of I-girder with corrugated webs $J_{cor}$ doesn't different from that of I-girder with flat webs. This paper pesents pure torsional constant of I-girder with corrugated webs by using finite element anaysis.

• 대한토목학회논문집
• /
• 제32권6A호
• /
• pp.347-354
• /
• 2012

본 연구에서는 Sine 파형 복부판을 갖는 I형 플레이트 거더의 비틂 상수와 �� 상수식을 제안한다. Sine 파형 복부판을 갖는 플레이트 거더는 일반적으로 기하학적 특성에 따라 높은 면외 방향 강성 및 전단강도, 비틂 강성을 갖는다. 특히, 플레이트 I형 거더의 횡-비틂 강도를 산정하는 데 있어서 부재 단면의 비틂 상수 및 �� 상수는 큰 영향을 미치는데, 종래의 수식으로는 Sine 파형 복부판의 이러한 단면상수를 합리적으로 산정하는 데 어려움이 있다. 따라서 본 연구에서는 Sine 파형 복부판의 기하학적 특성을 반영할 수 있는 새로운 제안식을 연구하였다. 쉘 요소를 사용한 I형 플레이트 거더의 순수 비틂 거동에 대한 유한요소해석결과를 통해 파형의 기하학적 특성에 따른 비틂 상수 변화를 분석하고 이를 회귀분석하여 수식을 제안하였다. 이후, 순수 비틂과 �� 비틂이 함께 존재하는 조건에서의 유한요소해석 결과를 통해 �� 상수 계산식을 제안하였다. 이 두 제안식은 단순 지지된 Sine 파형 복부판을 갖는 I형 플레이트 거더의 횡-비틂 좌굴해석 결과를 토대로 검증되었다. 본 연구에서 제안한 두 수식을 통해 Sine 파형 복부판을 갖는 I형 플레이트 거더의 중요한 두 단면 상수를 명확히 계산할 수 있고, 이를 통해 정확한 횡-비틂 좌굴 강도를 손쉽게 계산할 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.585-588
• /
• 2008

Resistance to lateral torsional buckling of steel I-girder (open section) is a very important design requirement. But, most studies of steel I-girder with corrugated webs were invested in shear behavior. Until now, most studies about Lateral torsional buckling of I-girder with corrugated webs have been based on Lindner.J's study. the study includes that the pure torsional constant of I-girder with corrugated webs doesn't different from that of I-girder with flat webs. This paper pesents pure torsional constant I-girder with sinusoidally corrugated webs by using finite element analysis.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.94-100
• /
• 2009

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, a closed form equation to predict spring constant of the sleeve spring and torsional characteristic of the torsional vibration damper was proposed to calculate stiffness of the damper and verified their availability through the finite element analysis. The theoretical values have a good agreement with the results obtained by the finite element analysis. The results obtained from the equation derived enable the designers in actual fields to be more efficient.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1471-1481
• /
• 2009

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, the closed form equations to predict the spring constant of a sleeve spring and the torsional characteristics of the torsional vibration damper are proposed to calculate stiffness of the damper and verified their availability through the finite element analysis and experiments. And the stability of the sleeve spring torsional vibration damper is verified by analyzing the inner star and outer star, which are the core parts of the damper, and 2-roll bending process is proposed to manufacture sleeve spring. The program to calculate the initial radius including spring-back effect is developed, and the FEA method to analyze elasto-plastic problem was verified through analysis of 90$^{\circ}$bending process. The results of the analysis are in good agreements with those of the experiments. The newly proposed method can be used as an advanced technique that remarkably curtails cost of production and replaces the conventional forming.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.11-16
• /
• 2012

In this paper, the authors formulate the sensitivity analysis algorithm for the natural frequency of a torsional shafting by expanding the transfer stiffness coefficient method. The basic concept of the present algorithm is based on the transfer of sensitivity stiffness coefficient, which is the derivative of stiffness coefficient with respect to design parameter, at every node from the first node to the last node in analytical model. The effectiveness of the present algorithm is confirmed by comparing the results of the sensitivity analysis and those of the reanalysis for the natural frequencies of a torsional shafting with a constant cross section. In numerical calculation, the design parameter is the diameter of the shaft element of the torsional shafting.

• 대한토목학회논문집
• /
• 제41권3호
• /
• pp.201-208
• /
• 2021

본 논문에서는 하부수평브레이싱 설치에 따른 무도상 철도판형교의 횡방향 및 비틀림거동에 관한 영향을 검토하였다. 우선 하부브레이싱의 부재 배치 형태가 다른 해석모델을 대상으로 하여 열차하중에 의한 횡방향변위를 비교 검토하여 가장 효율적인 하부 브레이싱의 배치에 대하여 검토하였다. 다음으로는 하부브레이싱을 설치한 2주형 철도판형교의 비틀림거동에 대해 검토를 수행하였다. 또한, FEM 해석결과로부터 구한 비틀림상수와 상부와 하부수평브레이싱을 등가두께로 치환하여 폐합단면으로 하는 철도판형교의 비틀림상수를 비교하였고, 교량의 지간길이와 하부브레이싱의 단면적의 영향을 검토하였다. 이와같은 해석결과를 기초로 본 연구에서는 횡좌굴모멘트와 비틀림상수비와의 관계곡선을 제시하였고 비틀림보강이 필요한 철도판형교의 범위를 제안하였다.

• 소음진동
• /
• 제5권1호
• /
• pp.75-83
• /
• 1995

The fluctuation of the engine torque appears to be the major source of the torsional vibration of the automotive driveline. The reduction of this torsional vibration has become a significant problem, due to an increase in the fluctuation of the torque of recent light weighted and high powered engines, along with the requirements of higher performance. The torsional vibration of the automotive driveline can be reduced by smoothing the fluctuation by adjusting the torsional characteristics of the clutch-disc. This paper presents an experimental and theoretical research on the clutch-disc torsional characteristics for the reduction of the torsional vibration at driving. The effects of clutch-damper on diminishing the torsional vibration were investigated experimentally. A dynamic model for the automotive driveline was developed, and the engine torque of the model were evaluated with experimental data. By executing a simulation using the model, it has become possible to obtain the clutch-disc torsional characteristics and the clutch-disc torsional characteristics for reducing the torsional vibration has been suggested. The results are as follows: (1) By exceuting simulations using nonlinear model of four degrees of freedom, a design technique to determine the clutch-disc torsional characteristics for reducing the torsional vibration at driving was developed. (2) The influence of barious torsional characteristics of the clutch has been studied in examining design parameters, which indicates that the domain to minimize the torsional vibration at driving depends on the characteristics of the clutch-damper, i. e., spring constant and hysteresis.

• Coupled systems mechanics
• /
• 제6권1호
• /
• pp.55-74
• /
• 2017

The evaluation of torsional effects on multistory buildings remains an open issue, despite considerable research efforts and numerous publications. In this study, a large number of multiple test structures are considered with normally distributed topological attributes, in order to quantify the statistically derived relationships between the torsional criteria and response parameters. The linear regression analysis results, depict that the center of twist and the ratio of torsion (ROT) index proved numerically to be the most reliable criteria for the prediction of the modal rotation and displacements, however the residuals distribution and R-squared derived for the ductility demands prediction, was not constant and low respectively. Thus, the assessment of the torsional parameters' contribution to the nonlinear structural response was investigated using artificial neural networks. Utilizing the connection weights approach, the Center of Strength, Torsional Stiffness and the Base Shear Torque curves were found to exhibit the highest impact numerically, while all the other torsional indices' contribution was investigated and quantified.