• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.411-418
• /
• 1999

Generally PI controller is used in the servo system, But the time response of the system which is designed by the PI control scheme is deviated from the desired time response by the system parameter variation or the perturbation like the torque disturbance. LMFC(Linear Model Following Controller) is used to make the response of the system follow that of the model even though the parameter variation or the perturbation exists. In this paper, the design method which uses auxiliary model to construct the robustness enhancer in LMFC is proposed. And this robustness enhancer is designed by robust control theory. The proposed method has facter convergence time against low frequency torque disturbance than LMFC. The results are verified by SIMULINK simulation and experiments.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.576-578
• /
• 1994

In this. paper, a new technique to estimate both the instantaneous speed and disturbance load torque using a low precision shaft encoder in very low speed range is proposed. To detect the instantaneous speed and disturbance load torque, the Kalman filter which is an optimal full order estimator is used. Experimental results conform the validity of the proposed estimation technique. The effects of parameter variations are discussed, and it is verified that the system is robust to the modeling error.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.6
• /
• pp.531-536
• /
• 2002

This paper investigates the problem of the speed controller of conventional speed sensorless stator flux-oriented(SFO) induction motor drive, and proposes a robust speed controller to solve the conventional problem. In the proposed method, a robust speed controller for speed sensorless SFO system Is designed by taking advantage of disturbance torque observer and using feedforward.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.279-282
• /
• 2004

This paper presents load torque observer that is used to deadbeat load torque observer in the induction motor position control system. The simulation has been obtained by simulink. A digital control is composed by trigger method in the continuous block diagram. The results show that proposed system has good effectiveness for the disturbance in induction servo motor system.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.175-178
• /
• 2002

In a conventional speed sensorless Stator Flux Oriented(SFO) induction machine drive system, the estimated speed is delayed in transients by the use of a low pass filter(LPF). To prevent extreme overshoot caused by this delay, PI controller gains should be small, which consequently is greatly affected by disturbance torque. In this paper, by taking advantage of disturbance torque observer and feedforward control, robust speed controller is designed for speed sensorless SFO system. The proposed method is verified by the simulation results.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.351-354
• /
• 1987

In this paper, an adaptive control scheme is applied to the speed control system of a synchronous AC servo motor. The adaptive control system using Ioannou's modified adaptation law is shown to be robustly stable in the presence of current control error and load torque disturbance. The computer simulation demonstrates the rapid compensation of rotor speed deviation due to load torque disturbance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.932-938
• /
• 2009

As a stringing troy wire is installed by manual operation, it is necessary to scheme the automatic system for stringing troy wire. To accomplish a task of this kind, in this paper an approach to designing controllers for the hybrid Position/Tension control of a stringing troy wire is presented. Position control system is designed based on equation of dc motor and motion equation of robot, it is controlled by feedback with a detected speed dc motor. Tension control system is designed based on equation of ac servomotor for generating torque and dynamic equation of a troy wire, it is controled by feedback with a detected tension. The control parameters is determined by simulation in independence operation of each system. To suppress a mutual interference that the disturbance occur in operating of two task at same time. Dynamic hybrid control is proposed by feed forward compensator with a disturbance accelerator and a step torque at start. The operation of proposed system is simulated and experimented, results is verified the utilities.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.272-276
• /
• 1996

This study deals with the speed control of an overcentered variable-displacement hydraulic motor on a constant pressure network, which is noted for its high system efficiency fast dynamic response and energy recovery capability. The speed control characteristics of the conventional cascade PI controller are largely affected by load-torque disturbances. To obtain robust speed control despite torque disturbances, the load torque is estimated by an observer based on a mathematical model and compensated for by a feedforward loop. It is shown by experiment that robust speed control may be obtained with the proposed controller. The experimental data agree fairly well with the theoretical analysis.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.4
• /
• pp.513-523
• /
• 2012

For precisely regulating the speed of a permanent magnet synchronous motor system with unknown load torque disturbance and disturbance inputs, an LMI-based sliding mode control scheme is proposed in this paper. After a brief review of the PMSM mathematical model, the sliding mode control law is designed in terms of linear matrix inequalities (LMIs). By adding an extended observer which estimates the unknown load torque, the proposed speed tracking controller can guarantee a good control performance. The stability of the proposed control system is proven through the reachability condition and an approximate method to implement the chattering reduction is also presented. The proposed control algorithm is implemented by using a digital signal processor (DSP) TMS320F28335. The simulation and experimental results verify that the proposed methodology achieves a more robust performance and a faster dynamic response than the conventional linear PI control method in the presence of PMSM parameter uncertainties and unknown external noises.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.301-308
• /
• 2015

In this paper, we propose an LTBC (Low Tension and Load Balance Control) scheme to improve a coiling shape control by reduction the tension fluctuation by the torque disturbance in the down coiler process of hot strip mills. The proposed controller is a combination of an LTC to control the overload at load-on in the mandrel and an LBC to regulate the load balance of the upper and bottom pinch roll. A tension calculation model is suggested with the concept of the tension deviation. The effectiveness of the proposed control scheme is verified from simulation under a disturbance of the pinch roll torque. Using a field test, we show that the performance of the shape and tension control is improved by the LTBC control.