• Title/Summary/Keyword: topping time

Search Result 21, Processing Time 0.019 seconds

INFLUENCE OF TOPPING TIME AND HEIGHT ON THE NONVOLATILE ORGANIC AND HIGHER FATTY ACID CONTENTS OF TOBACCO LEAVES (잎담배의 적심시기와 정도에 따른 엽중 비휘발성유기산 및 지방산의 함량변화)

  • 정기택;강서규
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.6 no.2
    • /
    • pp.169-178
    • /
    • 1984
  • This study was conducted to investigate the influence of the topping time and height on the nonvolatile organic and higher fatty acid contents and the correlation among acid contents of tobacco plants. Within the topping time, the flowering (normal) stage of topping was the lowest in total analyzed acid (TAA), total nonvolatile organic acid (TNOA) and magic acid contents of NC2326, however, the highest in those of Burley 21 on 30 days after budding. Total higher fatty acid (THFA) and linoleic acid contents tended to be low with normal stage of topping. The lower the topping height, the lower the TAA, THFA and linoleic acid contents in middle and upper leaves (or NC2326 and Burley 21 were observed. On the other hand, the lower the topping height, the lower the TNOA and malic acid contents in middle and upper leaves for Burley 21 and upper leaves for NC2326 were found. There was a significant positive correlation between magic acid and TNOA contents. Similarly, TAA content showed a significant positive correlation with TNOA, oxalic acid and citric acid contents. But there was a negative correlation between malic acid and THFA contents. There were highly positive correlations among oleic acid, linoleic acid and THFA contents, respectively.

  • PDF

Topping Effect on Growth and Yield of Soybean Growth in Paddy Field

  • Cho, Jin-Woong;Park, Moon-Soo;Lee, Jung-Joon;Lee, Mi-Ja;Jung D. So;Kim, Tae-Soo;Lee, Sang-Bok
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.48 no.2
    • /
    • pp.96-102
    • /
    • 2003
  • This study was conducted to determine the effects of two plant populations (28 and 14 plants per $m^2$) and two toppings in conventional plant population (28 plants per $m^2$) on soybean (Glycine max L. cv. Pungsannamulkong) cultivated in the paddy field. The two topping time were taken at 6$^{th}$ to 7$^{th}$ and 8$^{th}$ to 9$^{th}$ trifoliolate leaf stages in the conventional plant population. Experimental design for growth data was a randomized complete block with three replications, and samples were taken at R1 (July 31), R3 (August 19), R5 (September 2) and R7 (September 23) growth stages. The branch number of soybean was relatively higher in the low plant population (14 plants per $m^2$) and with the topping at the 6$^{th}$ to 7$^{th}$ leaf stage, in the conventional plant population (28 plants per $m^2$), and with topping at the 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage in descending order. The highest average branch length of soybean was observed in the low population and the longest branch length was observed from the soybean with topping at the 6$^{th}$ to 7$^{th}$ leaf stage. The leaf number per plant was decreased in order of in the low population, with the topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage, with the topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage, and in the conventional population. The leaf area was high in the low population and with topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage and was relatively low in the conventional population and with the topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage in soybean. The dry weight of leaves and branches was high in the low population and with the topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage and was relatively low in the conventional population and with topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage. The leaf number per plant was high in the low population and with topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage and was relatively low in the conventional population and with topping at 8$^{th}$ to 9$^{th}$ trifoliolate leaf stage. The grain yield per 10a was high with the topping at 6$^{th}$ to 7$^{th}$ trifoliolate leaf stage.

Changes of Nitrogenous Compound According to the Topping Stage and Harvesting Time in Burley Tobacco(Nicotiana tobacum L.) (버어리종 잎담배 순지르기 시기와 수확시기에 따른 질소화합물의 변화)

  • Jang, Soo-Won;Kim, Jae-Hyun;Park, Chang-Jin;Kim, Yoon-Ha;Lee, In-Jung
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.56 no.2
    • /
    • pp.146-150
    • /
    • 2011
  • A large amount of nitrogenous compounds are found in burley tobacco and are responsible for peculiar aroma during smoking. Excess in nitrogen or its compounds such as total nitrogen and proteins in burley tobacco gives a strong pungency and make its taste bad. The present study has focused on improving quality of Burley tobacco by regulating topping and harvesting time of leaf to reduce nitrogen compounds in Burley tobacco. In addition, the early-stage of flower topping had lower level of nitrogenous compound, such as total nitrogen and protein nitrogen, and total tobacco-specific nitrosamine (TSNA) contents compared to the button-stage and full flower-stage topping. Also, the contents of nicotine got significantly decreased while the ether extract was increased as the period of topping got delayed. Regarding the brightness among the colors of cured leaves, the color at the full flower-stage topping was the brightest, and there was no particular difference in red and yellow colors. The harvesting amount was decreased as the period of topping got delayed and there was no significant difference between the topping treatments in terms of the exterior quality. As the harvesting time delayed, the total nitrogen, protein nitrogen, nitrate nitrogen, and ammonium nitrogen were decreased while the nicotine contents got increased. Also, the total TSNA contents were decreased as the harvesting time delayed. However, ether extract was increased. Among the colors of cured leaves, the brightness and degree of yellow color were significantly increased as the harvesting time delayed, and there was no particular difference in the degree of red color. The harvesting amount was decreased along with the delayed harvesting time; however, the harvest of the matured and mellow leaves was higher in terms of price, compared to that of the immature leaves. For the reduction of nitrogenous compound and TSNA contents in Burley tobacco, the topping was examined to be more effective in terms of improvement in chemical contents and quality regardless of the decreased harvesting amount.

Effect of Topping Method on the Quality Components of Flue-cured Tobacco (연초의 적심방법이 품질구성형질에 미치는 영향)

  • Lee, Jong-Doo;Han, Jong-Koo;Ban, Yu-Son;Lee, Jung-Duk
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.1
    • /
    • pp.23-30
    • /
    • 1988
  • This experiment was carried out to obtain the basic information for the improving of leaf quality by topping time and depth in flue-cured tobacco. Development of palisade parenchyma and spongy parenchyma were in order of button stage>early flower stage>late flower stage by topping time, and were in order of 4th leaf topping from floral axis>2nd leaf topping from floral axis>floral axis by topping depth. When 2nd leaf from floral axis were topped at late flower stage in A grade field and at early flower stage in B grade field, total sugar to nicotine ratio ralating to organoleptic characteristics were desirable as 9.0 and 9.7, and petroleum ether extract contents relating flavor of flue-cured tobacco were high as 9.9% and 8.4%, respectively. In ecological tissue, percentage of direct effect on quality were 43.2% in palisade parenchyma. 26.5% in spongy parechyma. 17.7% in tissue ratio, 6.7% in leaf thickness, 3.1% in intercellular space, 2.8% in leaf type and in chemical components, were 40.6% in nicotine. 35.7% in T-sugar/nicotine, 10.0% in total sugar, 7.0% in T-nitrogen/nicotine, 4.6% in total nitrogen, 2.1% in petroleum ether extract. The optimum topping depth were desirable at topping under second leaf from floral axis at late flower stage in A grade field and at early flower stage in B grade field for good leaf quality.

  • PDF

Effects of Ethrel on Tobacco-Leaf Maturity -Influences by Different Levels of the Chemical, Soil Nitrogen and Time of the Chemical Application- (Ethrel의 농도, 처리시기 및 질소농도별 시비의 잎담배 성숙에 미치는 영향)

  • 정병화
    • Journal of Plant Biology
    • /
    • v.17 no.1
    • /
    • pp.15-21
    • /
    • 1974
  • The most commonly grown economical and flue-cured tobacco cultivar Yellow Special A was used in pot-culture tests in order to study Ethrel (2-chloroethyl phosponic acid) effects on accelerating maturity of tobacco leaves in relation to the most adequate level of the chemical useful for field growing, nitrogen level in soil for the most pronounced response, and the most suitable spray period during the growth stages of pre-, post- and topping periods. The following conclusions, thus, were obtained from the present studies; 1. 500ppm Ethrel spray was reconfirmed to be adequate in the practical applications, although the extent of yellow-ripening of tobacco leaves was increased as the Ethrel level increased. The highest leevel treated resulted in causing chemically damaged lesions on leaves and early defoliation. 2. Ethrel-treated leaves showed deeper yellowish tinge to them than those without treatment, while different levels of the chemcial had less influence on the tinge. 3. An adequate level of nitrogen supply to plants favored the Ethrel response, whereas either very low or high level of nitrogen in the soil lowered the chemical effect on accelerating the yellow-ripening. When carbohydrates versus total nitrogen ratio became relatively high, the condition brought out some outstanding Ethrel effects. 4. Chlorophyll level of leaves increased as soil applications of nitrogen level increased, and that also increased carotenoid level of the tobacco leaves. Ethrel-treated leaves showed deeper orange tinge than those without treatment, while the highest level of nitrogen application showed the deepest orange tinge to tobacco leaves. 5. Pre-topping treatment (12 days before topping and flowering) resulted in almost no Ethrel response, and that treatment right on the day of topping, showed response of yellow-leaf ripening at nearly bottom-half leaves of a tobacco plant. The post-topping treatment (12 days after topping) made plants showing full response of Ethrel from bottom to the top leaves of tobacco plant in accelerating the leaf maturity. 6. The extent of Ethrel responses on accelerating yellow-ripening of tobacco leaves was discussed for the modifying influences brought about by certain environmental factors. Discussions were also made about the possible practical applications (particularly for pre-rice planting) and quality difference that may be caused by such growth environments.

  • PDF

The Studies on Harvesting Time of Stalk Cutting in Burley Tobacco (버어리종의 대말림 수확시기에 관한 연구)

  • Bae, Seong-Guk;Han, H.C.;Choo, H.G.
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.14 no.2
    • /
    • pp.144-150
    • /
    • 1992
  • This study was carried out to investigate the effect of yield and quality on the harvesting time and methods of stalk cutting in Burley Tobacco.3 harvesting methods and 4 harvesting times of stalk cutting were compared to priming. The yield and quality were high when cut the stalk after second priming in stalk curing. It was also desirable that cut the stalk after second priming in stalk curing. It was also desirable that cut the stalk on 30 days after topping for standard fertilization(N-P2O5-K2O= 17.5-17.5-35.0kg/10a) plot, and 30-35 days after topping for 30% increased fertilization.

  • PDF

Effects of the Topping Methods on Yield and Quality of Flue-Cured Tobacco (적심방법이 잎담배의 수량 및 품질에 미치는 영향)

  • Kwon, K.H.;Ban, Y.S.;Lee, J.D.;Roh, J.Y.
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.27 no.2
    • /
    • pp.155-162
    • /
    • 1982
  • This study was conducted to investigate the effects of topping time and degree on the characteristics of three tobacco varieties, and to establish the early topping (Button stage) method at Eumseong Experiment Station, Korea Tobacco Research Institute in 1979-1980. The results are summarized as follows; yield increased in the plots of By 104, topping at button stage and under first leaf from floral axis. Quality was good in the plot topped at button stage and under first leaf from floral axis. Price per l0a was highest in the plot topped at button stage and under first leaf from floral axis.

  • PDF

Effects of the amount, time and form of nitrogen fertilization on the growth and Alkaloid formation in flue-cured Tobacco. (질소비료의 시비량.추비시기.형태가 담배의 생육및 Alkaloid 생성에 미치는 영향)

  • 이경민;변주섭
    • Journal of the Korean Society of Tobacco Science
    • /
    • v.4 no.1
    • /
    • pp.51-59
    • /
    • 1982
  • This experiment was conducted to investigate the effects of fertilization level, additional dressing time and form of nitrogen on the growth and formation of Alkaloid in flue-cured tobacco. The results are abstracted as follows. Length and width of harvested leaves, area of a leaf, leaf area per plant, number of harvested leaves, weight of a leaf, and leaf weight of a plant were larger in the $NO_3$-N plot than $NH_4$-N plot. Length, width and area of the middle leaves increased by additional dressing on 7 days before topping, but the dry weight Per unit leaf area of those was decreased. Leaf shape was broaden in additional dressing plots in comparison with 100% of basal dressing plot, but there is no difference among the additional dressing plots. And the smallest leaf shape index was shown at upper leaves in 100% of basal dressing Plot. Leaf weight of a Plaint was the highest in 12kg/10a Plot among $NO_3$-N form and in 12kg/10a plot among $NH_4$-N form. Total Alkaloid content was higher in $NH_4$-N plot between fertilization forms, and highest in 15kg/10a plot among fertilization levels and at the position of middle and upper leaves in the plot of 7 days before topping among additional dressing times.

  • PDF

Solar tower combined cycle plant with thermal storage: energy and exergy analyses

  • Mukhopadhyay, Soumitra;Ghosh, Sudip
    • Advances in Energy Research
    • /
    • v.4 no.1
    • /
    • pp.29-45
    • /
    • 2016
  • There has been a growing interest in the recent time for the development of solar power tower plants, which are mainly used for utility scale power generation. Combined heat and power (CHP) is an efficient and clean approach to generate electric power and useful thermal energy from a single heat source. The waste heat from the topping Brayton cycle is utilized in the bottoming HRSG cycle for driving steam turbine and also to produce process steam so that efficiency of the cycle is increased. A thermal storage system is likely to add greater reliability to such plants, providing power even during non-peak sunshine hours. This paper presents a conceptual configuration of a solar power tower combined heat and power plant with a topping air Brayton cycle. A simple downstream Rankine cycle with a heat recovery steam generator (HRSG) and a process heater have been considered for integration with the solar Brayton cycle. The conventional GT combustion chamber is replaced with a solar receiver. The combined cycle has been analyzed using energy as well as exergy methods for a range of pressure ratio across the GT block. From the thermodynamic analysis, it is found that such an integrated system would give a maximum total power (2.37 MW) at a much lower pressure ratio (5) with an overall efficiency exceeding 27%. The solar receiver and heliostats are the main components responsible for exergy destruction. However, exergetic performance of the components is found to improve at higher pressure ratio of the GT block.

Studies on the Anther Culture of Nicotiana tabacum II (Nicotiana tabacum의 약배양에 관한 연구 II)

  • 한창열
    • Journal of Plant Biology
    • /
    • v.14 no.1
    • /
    • pp.33-35
    • /
    • 1971
  • After topping, axillary buds of haploid plants derived from cultured anthers were treated with 0.4% aqueous solution of colchicine. Due to the high temperature and dry air at the time of treatment, most of the buds perished. A few months after the colchicine application, however, several shoots arose from the places where the dead buds were originally located. These shoots were mostly diploid. Induction of adventive shoots from the colchicine-treatedaxils was supposed to be rather effective method of obtaining diploid shoots from haploid plants. The diploid plants had larger floral organs than the haploid plants, and had good pollen fertility and seed setting. 24 bivalent chromosomes were observed at MI of the PMC's.

  • PDF