• The Korean Journal of Ecology
• /
• 제13권1호
• /
• pp.1-8
• /
• 1990

Effects of mycorrhizal infection on the growth of bell pepper (Capsicum annuum) and corn (Zea mays) seedlings have been studied by comparing plants grown in sterilized soil/sand mixtures to plants grown in sterilized soil/sand mixtures with topping the original non-sterile field soil. The original nonsterile field soil, which were taken from the bell pepper field, contained a high level of endmycorrhizal spores. After seven weeks, the shoot height of inoculated plants was increased by 110% in bell pepper, and 90% in corn compared with the control plants. The average above-ground biomass of inoculated plant was increased by 88% in bell pepper and 71% in corn compared with the control plants. The shoot-root ratios in bell pepper and corn were 2.7 and 1.8 for the control plants, and 4.3 and 2.7 for the treatment plants, respectively. Phosphorus level in inoculated plant was higher than that of the control plant. However, nitrogen contents were similar between the control and the treatment plants. The control plants didi not form vesicular-arbuscular mycorrhizae during the experimental period.

• 한국연초학회지
• /
• 제13권1호
• /
• pp.27-35
• /
• 1991

These studies were conducted to investigate the changes of starch, sugar and nicotine content in relation to maturity and cultural conditions and correlation between growth characteristics and chemical components in order to improve the leaf quality. The results were summarized as follows; 1. Nicotine content, total nitrogen content and the ratio of total nitrogen to nicotine of the green leaf were increased with heavier fertilizer, wider planting space and lower topping, whereas starch, total sugar and the ratio of sugar to nicotine were decreased. 2. Starch content, sugar content and the ratio of total sugar to nicotine(T-S/Nic) in the cured leaf were decreased with milder planting space, less application of MH and delaying harvesting date. 3. It was estimated that 58.1% of starch of the harvested leaf was converted into sugar of the cured leaf, and also they were significantly correlated each other.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.56-59
• /
• 2004

This paper presents the consideration of design guideline for underground HCS system, composite spancrete slab, under axial and bending force. Serviceability design requirements for continuous composite spancrete slab subjected axial force, which are allowable stress and deflection, are compared. Flexural strengths are evaluated by design guideline using strain-compatibility method. The results showed that stresses of spancrete and topping concrete, especially at the ends of beam, have much effect on design loads. Maximum service loads for tested specimens are proposed by allowable stress.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.205-207
• /
• 2006

Since a humanoid robot inherently suffers from instability and always risks tipping itself over, or topping to the ground, it is necessary to ensure high stability and reliability of walk. An unexpected ground condition is one of the principal factors of instability. This paper proposes a walk stabilization method consisting of a Fuzzy algorithm and geometry under uneven terrain. The ground reaction forces that are measured by the FSR sensors on the sole are used to check the ground condition and the robot posture. The effectiveness of proposed method is verified by computer simulations.

• 한국강구조학회 논문집
• /
• 제15권4호통권65호
• /
• pp.467-474
• /
• 2003

일반적인 합성보는 콘크리트 슬래브와 H형강 철골보 사이에 작용하는 수평전단력을 쉬어코넥터로 긴결하여 휨내력 및 강성을 증가시킨 구조다. H형강대신 U형 철골을 사용하고 그 속에 콘크리트를 채운 새로운 형태의 합성보 시스템이라 할 수 있는 T형 합성보의 구조 특성을 실험에 의해 분석하고, 기존의 합성보 설계이론을 토대로 내력평가를 하는 데 그 목적이 있다. 또한 T형 합성보의 구조설계 및 시공에 필요한 기초자료를 제시하고자 한다.

• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.41-46
• /
• 2011

This study investigated the changes in performance and operating characteristics of an F-class gas turbine according to the change of working fluid from air to carbon dioxide. The revised gas turbine is the topping cycle of the semi-closed oxy-fuel combustion combined cycle. With the same turbine inlet temperature, the $CO_2$ gas turbine is expected to produce about 85% more power. The main contributor is the greater compressor mass flow and the added oxygen flow for the combustion. Compressor pressure ratio increases about 50%. However, the gas turbine efficiency reduces about 10 %. Modulation of inlet guide vane to reduce the compressor inlet mass flow, the major purpose of which is to reduce the compressor inlet Mach number, was also performed.

• 한국연초학회지
• /
• 제3권2호
• /
• pp.103-108
• /
• 1981

This experiment was carried out to investigate effects of soil moisture content on the growth of tobacco plant at early stage after transplanting. Soil moisture was controlled to be 30%, 45%, 60%, 75% and 90% of the maximum water holding capacity (38.7%), and treated for 10, 20 and 30 days. Budding flowering and topping were delayed in the 30% and 45% treatment where soil moisture was deficient. Plant height, number of leaves, and length and width of the largest leaf were the best in the 75% treatment for 10 days, and development of the root and top was the best also in the same treatment. As the duration of low soil moisture treatment prolonged, intercellular space , became small. Nitrogen and potassium of the cured leaf showed the highest value in 30% and 45% treatments. Nicotine content of the cured leaf was high in the 90% treatment, and reducing sugar content of that was high in the 75% treatment for 10 days.

• 한국연초학회지
• /
• 제22권1호
• /
• pp.39-44
• /
• 2000

This study was carried out to obtain the basic information about the sucker producing characteristics of certain burley tobacco varieties(Nicotiana tabacum L. var. burley) at Suwon and Chonju Experiment Station, Korea Ginseng & Tobacco Research Institute in 1999. The number and weight of suckers for 12 varieties or breeding lines were investigated three times, 45 days after transplanting for ground sucker, 10 days after topping, and 10 days after maleic hydrazide(MH) applying for upstalk sucker. KB 103 and KB 9416-1 produced less ground suckers and upstalk suckers than other entries did. KB 9210-8 produced less ground suckers and (Male sterile TC 612 x KB 108)F$_1$ also produced less upstalk suckers than other entries did. There was no differences among entries in sucker production at 10 days after MH treatment. Between the weight of total sucker and days to flower revealed the negative correlation, but not significant. The low sucker producing entries described above could be used as a parental line in the breeding program for the low sucker producing variety.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.105-110
• /
• 2008

Most high rise buildings have been constructed with steel structure systems with metal deck floors and concrete topping. Since the mass of the metal deck floor system is relatively thinner than that of the concrete floor system and due to the larger span compared to other floor systems, vibration serviceability problems are frequently occurred. Most of vibration problems are induced by the movement of humans. A walking load function was proposed for the better estimation of composite deck floor vibration based on site measurements in this paper.

• Elastomers and Composites
• /
• 제2권1호
• /
• pp.31-36
• /
• 1967

As a series of the studies of thin rubber coated fabrics, the experiments were concentrated on the investigation of the physical properties of the surface and back coated fabrics with natural and synthetic rubber. Cotton poplin and nine other cotton shootings were used as a base fabric and both sides of fabric, face and back, were coated by means of topping or spreading process. The physical properties of finished material were broadly investigated especially in view of the quality requirements of the poncho.