• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.5
• /
• pp.81-90
• /
• 2007

Watershed topographical information is required in hydrologic analysis, supporting efficient hydrologic model operation and managing water resources. Watershed topographical data extraction systems based on desktop GIS are abundant these days placing burdens for spatial data processing on users. This paper describes development of a Web-based Geographic Information Systems that can delineate the Geum River sub-basins and extract watershed topographical data in real time. Through this system, users can obtain a watershed boundary by selecting outlet location and then extracting topographical data including watershed area, boundary length, average altitude, slope distribution about the elevation range with Web browsers. Moreover, the system provides watershed hydrological data including land use, soil types, soil drainage conditions, and NRCS(Natural Resources Conservation Service) curve number for hydrologic model operation through grid overlay technique. The system operability was evaluated with the hydrological data of WAMIS(Water Management Information System) with the government operation Web site as reference data.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.13-26
• /
• 2010

In this paper, a dynamic variable window-based topographical classification method is proposed which has the changeable classification units depending on topographical properties. In the proposed scheme, to im prove the classification efficiency, the unit of topographical classification can be changeable dynamically according to the topographical properties and repeated patterns. Also, in this paper, the classification efficiency and accuracy of the proposed method are analyzed in order to find an optimal maximum decision window-size through the experiment. According to the experiment results, the proposed dynamic variable window-based topographical classification method maintains similar accuracy but remarkably reduce computing time than that of a fixed window-size based one, respectively.

• Journal of Environmental Science International
• /
• v.14 no.1
• /
• pp.33-40
• /
• 2005

The size of minimum order stream has a very sensitive effect on runoff analysis model using the divergence characteristic of stream. Therefore, in this study, the threshold area of minimum order stream has been examined the change characteristic of topographical parameters. The subject basin of the research was the upper basin of the Kumho water gage station which is located in the middle of the Kumho river. The 1:25,000 numerical geography which was constructed $10{\times}10m$ mesh was used. The range of investigation of topographical parameters are number of stream order, length, area, slope, basin relief, sinuosity ratio, drainage density and total stream length etc. It was found from the result of analysis that the threshold value of minimum order stream has a very big effect on topographical parameters of basin. It was found that the threshold area of minimum ord er stream revealed under $0.10km^{2}.$ Furthermore, the parameters showed a serious change except for over $0.10km^{2}.$

• Proceedings of the ESK Conference
• /
• 1997.10a
• /
• pp.260-266
• /
• 1997

The Navigation Streets Map that directly supplies information for a driver plays an important role in Car Navigation System(CNS). Therefore, cause the compatibility, preference, visibility, and readability of the navigation streets map will be hold sway over driver's information acquisition, safety, and performance in CNS, it is important that designer's requirements should be analyuzed for ergonomic design of navigation streets map. Especially, there are differences between the topographical objects marking method and that of the general map in a navigation streets map. Because much information is marked in a narrow space, it is important that the text information should be done in navigation streets map. Also, because it is a important factor to mark the text format for the marking method of the topographical objects, the design requirements will be drawn out through the factor analysis for the text marking method. And when ergonomic designers are doing, this result will be basic research for developing driving simulator of CNS and it will be a ergonomic guideline of navigation streets map.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.44 no.6
• /
• pp.61-70
• /
• 2002

This study was performed to analyze the river fractal characteristics using GIS (Geographic Information System). In this study, topographical factors in river basin were grid-analyzed for each cell size and scale using GIS and regression formula was derived by analyzing correlation among topographical factors and cell size which were calculated here. And, a new rainfall-runoff model which is considering the calculated fractal dimension was developed to apply fur a river basin.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.51-60
• /
• 2001

This study analyzed fractal characteristics of river basin by using GIS. In this study, topographical factors in river basin was grid-analyzed for each cell size by using GIS and regression formula was derived by analyzing correlation among topographical factors and cell size which were calculated here. And, analysis of fractal characteristics of river by using the result calculated from 1) showed that among topographical factors, river length only increases according as cell size increases. The result of calculating fractal dimension for each cell size shows that river length, basin area, and centroidal flow path are 1.028, 1.0026 and 1.0061 respectively.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.289-293
• /
• 2007

Because the current numerical value map and update system in use do not reflect rapidly enough the transformation of topography, their usage are gradually in decrease. Therefore, there is an increasing demand for reception update system of numerical value map which can guarantee the accuracy and up-to-dateness of data. While rapid detection of topographical transformation is essential for rapid updating, the existing research based on remote investigation or direct measurement was difficult to apply efficiently in terms of cost and accuracy. Thereupon, this research aims to present efficient methods of detecting topographical transformations for a frequent real time updating of numerical value map using the topographical transformation and related data inputted in real time into the administrative information system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.6
• /
• pp.1-9
• /
• 2009

Watershed topographical data is essential for the management for water resources and watershed management in terms of hydrology analysis. Collecting watershed topographical and meteorological data is the first step for simulating hydrological models and calculating hydrological components. This study describes a specialized Web-based Geographic Information Systems, Soil Water Assessment Tool model data generation system, which was developed to support SWAT model operation using Web-GIS capability for map browsing, online watershed delineation and topographical and meteorological data extraction. This system tested its operability extracting watershed topographical and meteorological data in real time and the extracted spatial and weather data were seamlessly imported to ArcSWAT system demonstrating its usability. The Web-GIS would be useful to users who are willing to operate SWAT models for the various watershed management purposes in terms of spatial and weather preparing.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.23-33
• /
• 2005

Hydrologic-topographical parameters were extracted using GIS. The use of GIS is more effective and exact than the execution by person. And the purpose of this paper is to extract more efficient size of grid for DEM analysis by applying GIS technology. As a result, when the grid size is less than $100m{\times}100m$ the trend of extracted parameters is similar but when the grid size is over $100m{\times}100m$ the trend of extraction parameters is dispersive. Therefore, it is appropriate to extract hydrologic-topographical parameters the grid size of $100m{\times}100m$ in DEM analysis.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.575-578
• /
• 2005

Topographical images, in case of aerial or satellite images, are usually similar in colors and textures, and complex in shapes. Thus we have to use shape features of images for efficiently retrieving a query image from topographical image databases. In this paper, we propose a shape feature extraction method which is suitable for topographical images. This method, which improves the existing projection in the Cartesian coordinates, performs the projection operation in the polar coordinates. This method extracts three attributes, namely the number of region pixels, the boundary pixel length of the region from the centroid, the number of alternations between region and background, along each angular direction of the polar coordinates. It extracts the features of complex shape objects which may have holes and disconnected regions. An advantage of our method is that it is invariant to rotation/scale/translation of images. Finally we show the advantages of our method through experiments by comparing it with CSS which is one of the most successful methods in the area of shape feature extraction