• Restorative Dentistry and Endodontics
• /
• v.28 no.6
• /
• pp.485-490
• /
• 2003

Complete understanding of the exterior and interior structure of the tooth would be prerequisite to the successful clinical results, especially in the restorative and endodontic treatment. Although three-dimensional reconstruction method using x-ray microtomography could not be used in clinical cases, it may be the best way to reconstruct the morphologic characteristics of the tooth structure in detail without destructing the tooth itself. This study was done to three dimensionally reconstruct every teeth in the arch in order to increase the understanding about the endodontic treatment and to promote the effective restorative treatment by upgrading the knowledge of the tooth morphology. After placing tooth between the microfocus x-ray tube and the image intensifier to obtain two-dimensional images of each level. scanning was done under the condition of 80 keV, $100{\;}\mu\textrm{m}$, 16.8 magnification with the spot size of $8{\;}\mu\textrm{m}$. Cross-section pixel size of $16.28{\;}\mu\textrm{m}$ and 48.83 cross-section to cross-section distance were also used. From the results of this study, precise three dimensional reconstructed images of every teeth could be obtained. Furthermore, it was possible to see image that showed interested area only, for example. enamel portion only, pulp and dentin area without enamel structure, pulp only, combination image of enamel and pulp, etc. It was also possible to see transparent image without some part of tooth structure. This image might be used as a guide when restoring and preparing the full and partial crown by showing the positional and morphological relationship between the pulp and the outer tooth structure. Another profit may be related with the fact that it would promote the understanding of the interior structure by making observation of the auto-rotating image of AVI file from the various direction possible.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.488-496
• /
• 2004

The purpose of the present study was to investigate the relationship of dental crowding to tooth size and arch dimension in Korean subjects. Two groups of dental casts with Class I molar relationship, were selected on the basis of crowding. One group, consisting of 82 pairs of study cast (29 males and 53 females), exhibited at least 7 millimeters of crowding in each arch. A second group, consisting of 82 sets of study cast (37 males and 45 females), exhibited normal occlusion with little or no crowding. Mesiodistal tooth diameters, and buccal and lingual dental arch widths were measured and compared between the crowding and normal occlusion groups. Significant differences were observed between the two groups not only in arch widths but also in tooth sizes. The results of the present study suggest that both extraction and expansion can be used as a treatment approach for the crowding cases.

• Proceedings of the Korean Society of Veterinary Clinics Conference
• /
• 2006.05a
• /
• pp.210-210
• /
• 2006

• Tribology and Lubricants
• /
• v.28 no.1
• /
• pp.27-32
• /
• 2012

Oval gears are typical kinds of non-circular gears and are widely used in flow meters. This paper presents a tooth profile design of an oval gear according to the curvature of the pitch curve. The length of the pitch oval is divided by the number of teeth and the curvature of the divided points is obtained. The tooth profile is designed on the circle of the curvature as if it is the pitch circle of a gear. The teeth of the oval gear have the same module and pressure angle, but the pitch circle of each tooth differs in size. Thus, the teeth on the divided points of the pitch oval are different in shape. This type of oval gear will improve the meshing properties.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.2
• /
• pp.173-179
• /
• 2009

Dentigerous cyst is an odontogenic cyst which occurs in unerupted tooth crown. After the crown formation, enamel epithelium remnants surrounded continuously proliferates and it forms effusionfluid cyst and expands due to increased internal osmotic pressure. Treatments of cysts are mainly enucleation, marsupialization and de-compression. When deciding the way of treatment, the age of a patient, the anatomical circumstances, the region of lesion and the size of cyst should be considered. Marsupialization is that some parts of internal cystic wall would be converted into oral mucosa if the cyst is large size and is concerned about neighboring anatomic structure. It can be accompanied by enucleation later and eruption of related tooth can be possible. If there is a limitation of spontaneous tooth eruption, eruption of tooth can be induced by orthodontic apparatus. There were 3 patients had dentigerous cyst and underwent marsupialization, their impacted teeth had preserved and had induced eruption, all showing satisfactory results.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.101-107
• /
• 2011

Analytical solution of micro-scale milling process is presented in order to suggest available machining conditions. The size effect should be considered to determine cutting characteristics in micro-scale cutting. The feed per tooth is the most dominant cutting parameter related to the size effect in micro-scale milling process. In order to determine the feed per tooth at which chips can be formed, the finite element method is used. The finite element method is employed by utilizing the Johnson-Cook (JC) model as a constitutive model of work material flow stress. Machining experiments are performed to validate the simulation results by using a micro-machining stage. The validation is conducted by observing cutting force signals from a cutting tool and the conditions of the machined surface of the workpiece.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.2
• /
• pp.79-84
• /
• 2022

Objectives: The purpose of this study was to evaluate risk factors and symptoms in cemento-osseous dysplasia (COD) patients. Materials and Methods: In this study, 62 patients who were diagnosed histologically with COD were investigated from 2010 to 2020 at the author's institution. We compared clinical and radiological characteristics of symptomatic and asymptomatic patients. The factors were sex, age, lesion size, site, radiologic stage of lesion, apical involvement, sign of infection, and history of tooth extraction. Statistical analysis was performed using Fisher's exact test and the chi-square test. Results: COD was more prevalent in female patients. With the exception of three cases, all were focal COD. The majority of patients presented with symptoms when the lesion was smaller than 1.5 cm in size. Symptoms were observed when the apex of the tooth was included in the lesion or there was a local infection around the lesion. The history of tooth extraction and previous endodontic treatment were evaluated, and history was not a significant predictor for the onset of symptoms. Conclusion: In this study, risk factors associated with symptomatic patients were size of lesion, apical involvement, and local infection.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.64-75
• /
• 2019

The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns). The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown. The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor. The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns. Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.33-50
• /
• 1984

The purpose of this study was to investigate whether the ashed tooth powder is utilized as an alternative material of the implant to recovery the bony defect. For this purpose its biocompatibility was evaluated comparing to the synthetic calcium phosphate compounds, such as Syntograft and Calcitite, as well as the vacuum firing porcelain (Ceramco Inc.) which is anticipated to use as a matrix to aid sintering. Bony defects to exposure the bone marrow, $3{\times}5$ mm in size, were created in the right and left tibias of fifteen rabbits, and then the ashed tooth powder at $950^{\circ}C$, the porcelain powder, Syhtograft and Calcitite were inserted in the defects of twelve rabbits of the experimental group and the blood clot only was filled in the defects of three rabbits of the control group. The experimental and control rabbits were sacrificed at 1st, 2nd 3rd week after implantation and the histologic examination was performed. The ashed tooth powder in order to make the needed form of the implant was molded using the cylindrical mold 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$ and the ashed tooth powder was sintered at $1100^{\circ}C$ for 1 hour and the mixture of the porcelain powder and the ashed tooth powder at the weight ratio of 7:3, 6:4, 5:5, 4:6 were molded in the same manner and were sintered at $925^{\circ}C$. From this sintered material, square shaped implants were prepared in the dimension of $2{\times}4{\times}6mm$. The prepared implants were surgically placed in the subperiosteum of lateral surfaces of the right and left mandibular bodies. The dogs were sacrificed at 4 weeks, and then the specimens were examined using the light and scanning electron microscopes. The results of this study were obtained as follows: 1. Any inflammatory response was not noted after implanting of the ashed tooth powder, Syntograft, Calcitite and the porcelain powder during the whole experimental period after implantation. 2. Induction of the new bone formation was significantly shown in the ashed tooth powder, Syntograft and Calcitite. 3. The more the porcelain powder was contained in the implants, the more the porosity was and the bigger the pore size was under the scanning electron microscope. And there was ingrowing of the fibrous connective and the osteoid tissue. 4. The osteoid tissues were found to be directly fused to the implant of the ashed tooth powder, and the mixture implant of the porcelain powder and the ashed tooth powder at the weight ratio of 4:6 under the light and scanning electron microscopes.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.759-772
• /
• 1994

Orthodontists have experienced the treatment of cases with three lower incisors. Occasionally a lower incisor was either congenitally missing or so seriously damaged by injury or disease that its removal presented the best prospect for the patient. Sometimes the intentional extraction of a lower incisor is needed to produce enhanced functional and esthetic results with minimal orthodontic manipulation. Such cases have unfavorable anterior tooth size discrepancies and present difficulties in achieving good occlusal results. However such difficulties can be overcome by the sensible diagnosis and treatment plan. Three different cases are presented and the conclusions are listed. 1. It is important for orthodontist who tries to treat three lower incisor cases to measure and calculate accurately the degree of deviation of tooth size and morphology and the anterior tooth size ratio. 2. A diagnostic setup model should be made to determine whether the incisor extraction is appropriate and space closure is needed or not. It is the best way to be sure that the occlusal results, including overbite and overjet, will be acceptable and how far the degree of midline deviation is. It also shows the amount of interproximal reduction to achieve an acceptable occlusal result. 3. The class I relationship between the upper canine and the lower one must be obtained to establish the canine rise during eccentric movement by the concept of mutually protective occlusion. It also helps to maintain the stable occlusal result.