• Journal of Oral Medicine and Pain
• /
• v.44 no.1
• /
• pp.40-44
• /
• 2019

Third molar extraction, one of the important surgical treatments commonly practiced in dentistry, presents various symptoms after surgery ranging from temporary or mild symptoms to permanent or severe complications. However, oral burning pain, dysesthesia, parageusia, dry mouth, headache and pain in multiple teeth are not the common symptoms that patients often complain after dental extraction. Here, the authors report two cases who presented acute neuropathic symptoms mentioned above in the orofacial regions following third molar extraction. At the initial examination, the healing of the tooth sockets of two patients was normal. One patient was diagnosed as megaloblastic anemia associated with Vitamin $B_{12}$ deficiency and was referred to the Department of Hematology for assessing the underlying etiology of anemia. The laboratory test for the other patient revealed microcytic anemia related to iron deficiency. The patient with iron deficiency anemia was successfully treated with iron supplement. These two cases suggest that anemia, as an underlying systemic disease, may be a rare etiology explaining acute onset of peripheral neuropathy in the orofacial regions after third molar extraction and should be considered in the assessment of patients who report neuropathic symptoms after dental extraction.

• Restorative Dentistry and Endodontics
• /
• v.14 no.1
• /
• pp.173-177
• /
• 1989

As widely known major cause of tooth discoloration is red blood cell in dentinal tubules after tooth trauma and extirpation. Hemoglobin in the red cells easily conbine with hydrogen sulfide and change natural tooth color into dark brown. To confirm and compare the effect of bleaching agents test material was made as fellows: No. 40 paper points were soaked in blood and put into the oven for 24 hours to dry. Dried paper points were again soaked in diluted yolk by distilled water for a minute and kept the points for a week to get fully sulfide. Hydrogen peroxide (25%), Sodium hypochlorite (2%), Sodium hyposulfate (2%), Sodium perborate and mixture of Hydrogen peroxide (25%) and Sodium perborate were employed as bleaching agents. About 0.2ml of each medicaments were put into the small test tubes and blood soaked paper points were gently placed vertically with the apex downward and kept 24 hours in the oven ($37^{\circ}C$). Every 24 hours the medicaments were renewed at 24 and 48 hours. Following are the results of the study: 1. Significant bleaching effect was found on the case of hydrogen peroxide (25%) after 24 hours. The area above 2mm from apex also fully bleached after 48 hours. 2. A mixture of hydrogen peroxide and sodium perborate treated case showed moderate effect at 24 hours and significant effect at 48 hours. High portion of the point (above 2mm) was bleached satisfactory at 72 hours. 3. The effect of sodium perborate at 48 hours showed moderate and significant at 72 hours. 4. Sodium hypochlorite and sodium hyposulfate were weak agent in bleaching. At 72 hours case revealed moderate effect and influenced on high portion of the point very weak effect.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.729-733
• /
• 2004

Tooth avulsion usually causes inflammatory root resorption and ankylosis, and ankylosis cause severe functional and esthetic problems, especially in childhood. A 7-year-old female visited the Dept. of Pediatric Dentistry, Yonsei University with the chief complaint of avulsive trauma to the upper right incisor which was left dry for 40 minutes. Tooth was irrigated with saline and replanted immediately and splinted. Anti bacterial agent and anti inflammatory agent were prescribed. After 4 months of replantation slight external root resorption and apical radiolucency was seen at radiographic examination, therfore pulp extirpation and calcium hydroxide($Vitapex^{TM}$) canal filling were carried out. After 16 months, root canal was filled with gutta-percha, and bleaching treatment was done. Treatment results were satisfactory both esthetically and functionally for 8 years and 5 months.

• Imaging Science in Dentistry
• /
• v.54 no.3
• /
• pp.289-295
• /
• 2024

Purpose: This study examined the influence of metal artifact reduction (MAR), the application of sharpening filters, and their combination on the diagnosis of horizontal root fracture (HRF) in teeth adjacent to a zirconia implant on cone-beam computed tomography (CBCT) examinations. Materials and Methods: Nineteen single-rooted teeth (9 with HRF and 10 without) were individually positioned in the right central incisor socket of a dry human maxilla. A zirconia implant was placed adjacent to each tooth. Imaging was performed using an OP300 Maxio CBCT (Instrumentarium, Tuusula, Finland) unit with the following settings: a current of 8 mA, both MAR modes(enabled and disabled), a 5×5 cm field of view, a voxel size of 0.085 mm, and a peak kilovoltage of 90 kVp. Four oral and maxillofacial radiologists independently evaluated the CBCT scans under both MAR conditions and across 3 levels of sharpening filter application (none, Sharpen 1×, and Sharpen 2×). Diagnostic metrics were calculated and compared using 2-way analysis of variance (α=5%). The weighted kappa test was used to assess intra- and inter-examiner reliability in the diagnosis of HRF. Results: MAR tool activation, sharpening filter use, and their combination did not significantly impact the area under the receiver operating characteristic curve, sensitivity, or specificity of HRF diagnosis (P>0.05). Intra- and inter-examiner agreement ranged from fair to substantial. Conclusion: The diagnosis of HRF in a tooth adjacent to a zirconia implant is not affected by the activation of MAR, the application of a sharpening filter, or the combination of these tools.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.3
• /
• pp.93-102
• /
• 2018

Angiogenesis is one of the essential processes that occur during wound healing. It is responsible for providing immunity as well as the regenerative cells, nutrition, and oxygen needed for the healing of the alveolar socket following tooth extraction. The inappropriate removal of formed blood clots causes the undesirable phenomenon of alveolar osteitis (AO) or dry socket. In this review, we aimed to investigate whether enhanced angiogenesis contributes to a more effective prevention of AO. The potential pro- or anti-angiogenic activity of different materials used for the treatment of AO were evaluated. An electronic search was performed in the PubMed, MEDLINE, and EMBASE databases via OVID from January 2000 to September 2016 using the keywords mentioned in the PubMed and MeSH (Medical Subject Headings) terms regarding the role of angiogenesis in the prevention of AO. Our initial search identified 408 articles using the keywords indicated above, with 38 of them meeting the inclusion criteria set for this review. Due to the undeniable role of angiogenesis in the socket healing process, it is beneficial if strategies for preventing AO are directed toward more proangiogenic materials and modalities.

• Advances in materials Research
• /
• v.9 no.3
• /
• pp.189-202
• /
• 2020

The objective of the present work is to investigate the effect of cutting parameters (Vc, fz and ap) on tool life and the level of vibrations velocity in the machined part during face milling operation of hardened AISI 52100 steel. Dry-face milling has been achieved in the annealed (28 HRc) and quenched (55 HRc) conditions using multi-layer coating micro-grain carbide inserts. Statistical analysis based on the Response surface methodology (RSM) and ANOVA analysis have been conducted through a plan of experiments methodology using a reduced Taguchi table (L9) in order to obtain engineering models for tool life and vibration velocity in the workpiece for both heat treatment conditions. The results show that the cutting speed has a dominant influence on tool life for both soft and hard part. Cutting speed and feed per tooth is the most significant parameters for vibration levels. Comparing the experimental values with those predicted by the developed engineering models of tool life and levels of vibrations velocity, a good correlation has been obtained (between 97% and 99%) in annealed and hard conditions.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.283-294
• /
• 1993

The friction of orthodontic appliances is recogonized to be detrimental to tooth movement. The purpose of this study was to determine the magnitude of frictional force changes between bracket$(018'\times025'\;solt)$ and orthodontic wires(stainless steel, cobalt-chromium, and $\beta-titanium$, $017'\times0.25'$ rectangular) with time. The wire was secured in the bracket slot with a elastomeric ligature. Frictional forces were measured by universal testing machine. The following conclusions were obtained. 1. The frictional forces under dry condition were greater than those in saliva. 2. The frictional forces produced by cobalt-chromium wire were less than those generated by stainless steel and $\beta-titanium$ wire. 3. The frictional forces increased progressively with time, and the amount of increase on first two weeks was greater than on last two weeks. 4. The change of frictional force under dry condition was greater than in artificial saliva.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.153-161
• /
• 2004

This study investigated that the effect of rewetting agent on dentinal microtensile bond strength(${\mu}TBS$). Human molars were sectioned to expose the superficial dentin surfaces. Samples were divided into two groups according to type of adhesives-Single Bond (S) and One-Step (0)], and again subdivided into five groups by different dentin surface treatment-dry for 15s (D), blot dry (BD) or dry for 15s, and rewet with different rewetting agents [distilled water (DW), Gluma Desensitizer (GD) and Aqua-Prep (AP)] for 30s. After application of adhesive, composite resin was built up on the bonding surface. Each tooth was sectioned to obtain stick with $1\textrm{mm}^2$ cross sectional area and the ${\mu}TBS$ was determined by EZ test. In the S group, the mean ${\mu}TBS$ of GD, AP, and BD group was significantly higher than that of DW and D group (p < 0.05), In the O group, the mean, ${\mu}TBS$ of AP, GD, BD and DW group was significantly higher than that of D group (p < 0.05). The data suggested that Gluma Desensitizer and Aqua-Prep could be successfully used as rewetting agents, and Distilled water could be acceptable in aceton based adhesive system only.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.2
• /
• pp.179-185
• /
• 2022

The purpose of this study is to provide basic data on the negative factors of oral health in masks and the importance of oral health management according to the use of masks to prevent novel coronavirus infection (COVID-19). From May 3 to 31, 2021, 232 adults aged 20 to 59 across the country were surveyed and statistically analyzed. As for the mask selection, 63.9% of men and 61.3% of women chose the KF_94 mask for both men and women, and it was found that the older they were, the more they chose the KF_94 mask. Self-recognition of dry mouth and bad breath due to wearing a mask showed that the group wearing a cotton mask felt high dry mouth, and there was a statistically significant difference. There was a significant positive correlation between mask type, dry mouth(r=.142, p<.05), and age(r=.234, p<.01). There was a significant positive correlation between mask wearing time and age(r=.158, p<.05), and it was found to be negatively correlated according to occupation, and was statistically significant(r=-.472, p< .01). Dry mouth had a statistically significant positive correlation with bad breath(r=3.04, p<.01) and age(r=.224, p<.01).

• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.1-7
• /
• 2020

Purpose: This study was performed to evaluate the magnitude of artifacts produced by gutta-percha and metal posts on cone-beam computed tomography (CBCT) scans obtained with different tube currents and with or without metal artifact reduction (MAR). Materials and Methods: A tooth was inserted in a dry human mandible socket, and CBCT scans were acquired after root canal instrumentation, root canal filling, and metal post placement with various tube currents with and without MAR activation. The artifact magnitude was assessed by the standard deviation (SD) of gray values and the contrast-to-noise ratio (CNR) at the various distances from the tooth. Data were compared using multi-way analysis of variance. Results: At all distances, a current of 4 mA was associated with a higher SD and a lower CNR than 8 mA or 10 mA (P<0.05). For the metal posts without MAR, the artifact magnitude as assessed by SD was greatest at 1.5 cm or less (P<0.05). When MAR was applied, SD values for distances 1.5 cm or closer to the tooth were reduced (P<0.05). MAR usage did not influence the magnitude of artifacts in the control and gutta-percha groups(P>0.05). Conclusion: Increasing the tube current from 4 mA to 8 mA may reduce the magnitude of artifacts from metal posts. The magnitude of artifacts arising from metal posts was significantly higher at distances of 1.5 cm or less than at greater distances. MAR usage improved image quality near the metal post, but had no significant influence farther than 1.5 cm from the tooth.