• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.11-18
• /
• 2008

The purposes of this study were to examine the effect of 35% Carbamide Peroxide(CP) bleaching agent on the changes in physical and chemical characteristics of tooth. The effect of bleaching agent on enamel was analyzed using Hardness test, SEM and EDS. The microhardness between bleached groups after bleaching showed statistically significant difference according to the paired t-test. The bleached enamel surface showed apparent morphological changes compared to the enamel, which was stored in distilled water only. The difference of the total mineral contents for the distilled water and Carbamide Peroxide did not show statistical significance. These results demonstrated that bleaching using 35% Carbamide Peroxide were adversely affects application time of experimental group and may the safety of using these agents for a short time in dentist-monitored bleaching.

• Journal of the Korea Convergence Society
• /
• v.6 no.5
• /
• pp.165-171
• /
• 2015

This in vitro study compared the effect of bleaching agent modified by the addition of $TiO_2$ catalyst converged bleaching agent. Nonvital teeth samples were assigned to four group(n=6) according to the bleaching agent: 10% carbamide peroxide(CP) bleaching agen, 10% CP with 10% $TiO_2$ catalyst, 20% CP bleaching agent and 20% CP with 20% $TiO_2$ catalyst. Changes in enamel color were evaluated on minutes 30, 60, 180, 300 and 420. It was found that 20% CP with 20% $TiO_2$ catalysis increased the whiteness and overall color value and showed significantly brightened. The teeth bleaching time was reduced with $TiO_2$ catalyst converged bleaching agent. This result will contribute to development of the teeth bleaching agent.

• Journal of dental hygiene science
• /
• v.21 no.2
• /
• pp.96-103
• /
• 2021

Background: We aimed to investigate the effect of Citrous limon extract (CLE) on oxidative stress-induced cytotoxicity and nitric oxide (NO) generation and the tooth bleaching effect of CLE as a substitute for hydrogen peroxide (H₂O₂) and determine the feasibility and application of CLE as a safe and effective natural tooth bleaching agent. Methods: The protective effect of CLE on H₂O₂-induced cytotoxicity in Raw264.7 macrophages was investigated by the MTT assay. The inhibitory effect of CLE on the generation of H₂O₂-induced NO was confirmed by the NO assay, and the changes in inducible nitric oxide synthase (iNOS) protein expression were confirmed by western blotting. Stained bovine teeth were treated with/without 15% and/or 35% CLE and H₂O₂, 15% sodium bicarbonate (NaHCO₃) for 3 hours, and were irradiated with/without bleaching light (BL) for 15 minutes. The color change of the treated bovine tooth surface was measured using a colorimeter. Results: The viability of Raw264.7 cells treated with each concentration of CLE and 500 μM H₂O₂ significantly increased as CLE increased, and NO generation and iNOS protein expression were significantly reduced in cells treated with 300 ㎍ CLE+/500 μM H₂O₂+ and 300 ㎍ CLE+/500 μM H₂O₂+/150 ㎍ NaHCO₃+. The bleaching effect of 35% CLE+ was higher than that of 15% CLE+ and 15% NaHCO₃+, and the effect was similar to that of 15% H₂O₂+. The 35% CLE+/15% NaHCO₃+ showed the greatest bleaching effect and was higher than that of the groups irradiated with the BL. The greatest bleaching effect was observed with 35% CLE+/15% NaHCO₃+, followed by 35% H₂O₂+/BL+. Conclusion: CLE inhibited oxidative stress-induced cytotoxicity and NO generation in Raw264.7 cells and, could replace H₂O₂, which causes side effects and risks in teeth breaching treatment. It showed greatest teeth bleaching effect when combined with NaHCO₃. CLE is an effective and safe natural tooth bleaching substitute.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.353-360
• /
• 2012

The purpose of this study was to evaluate tooth color and microhardness after 15% carbamide peroxide(CP) bleaching treatments with/without potassium nitrate and fluoride(PF), which were used home bleaching. Thirty tooth specimens were obtained from thirty premolar and were randomly divided into three groups: 1, untreated controls(Distilled water): 2, treatment with 15% CP bleaching agent; 3, treatment with 15% CP bleaching agent (contained 3% potassium nitrate and 0.11% fluoride). All groups were treated 6h per day for 14 days then immersed in distilled water. Changes in enamel color were evaluated on Baseline and Day 14. Microhardness were evaluated on Baseline, Days 7 and 14. All the bleached enamel specimens revealed increased whiteness without control group. Groups 2 and 3 showed significantly decreased enamel microhardness compared to control group. On Day 7, Groups 2-3 showed significantly decreased enamel microhardness compared to control group and respective baseline data. The percentage microhardness loss(PML) look at Day 7 and 14 for Group 1, respectively, there was little difference between 1.7 and 0.8. However, Group 2 was 21.9 and 3.5, Group 3 was 16.7 and 1.4 as a baseline and Day 7 were significantly different (p<0.05). The PML of group 2 was significantly highest than that of group 3 on Day 7. As a result, the data indicate that the addition of PF did not influence the whitening efficacy of the bleaching agent negatively. PF-containing bleaching agent reduce the percentage microhardness loss. PF-containing tooth bleaching your teeth with a whitening effect can be reduced by decreasing the hardness of enamel.

• Restorative Dentistry and Endodontics
• /
• v.46 no.4
• /
• pp.47.1-47.9
• /
• 2021

Objectives: This study aimed to use a laboratory model to evaluate the efficacy of an experimental bleaching agent. Materials and Methods: The model used human extracted molars that were treated and measured for bleaching efficacy. Teeth (n = 50) were distributed into 5 groups: Negative control (NC): immersion in water for 8 hours; Nanofibers (NFs): Experimental titanium dioxide nanofibers with stirring and light activation for 8 hours; Whitestrips (WS): Crest 3D White Glamorous White Whitestrips, 2 applications daily for 30 minutes, 14 days; 1% hydrogen peroxide (HP) standard: 1% hydrogen peroxide for 8 hours; and 30% HP standard: 30% hydrogen peroxide for 8 hours. Instrumental measurements were performed using a spectrophotometer. Results were recorded at baseline, 1-day post-bleaching, and 1-week post-bleaching. Kruskal-Wallis procedure was used to determine differences in color change. Pearson correlation was used to evaluate the relationship between visual and instrumental measurements. Tests of hypotheses were 2-sided with alpha = 0.05. Results: There was no significant difference in color parameters (L1, a1, b1, and shade guide units [SGU]) at baseline (p > 0.05). There was a significant difference among the groups for overall color change (ΔE^*ab) and change in shade guide units (ΔSGU) at 1-day and 1-week post-bleaching (p < 0.05). The higher the HP concentration, the higher the color change as expressed in ΔSGU and ΔE^*ab. The negative control exceeded the perceptibility threshold of ΔE^* = 1.2 regardless of time point. NFs showed a decrease in chroma, but were not statistically different compared to the negative control. Conclusions: The laboratory model was successful in screening an experimental bleaching agent.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.451-469
• /
• 2002

The purpose of this study was to estimate the effect of a bleaching agent on tooth surfaces and to evaluate the resin bond strength according to different surface treatments on bleached teeth. To prepare for the experimental samples, first, extracted human third molars were used and the body portions of the crowns were cut into four equal-sized specimens. Next, each specimen was mounted in an plastic bottle with self-cured resin and highly polished to have them reveal the enamel or dentin surfaces. Then, the enamel(E) and dentin(D) specimens were divided into four ; 1) non-bleached, laser-treated(NBLA) group 2) bleached, laser-treated(BLLA) group 3) non-bleached, acid-treated(NBAC) group and 4) bleached, acid-treated(BLAC) group. Here, $opalescence^{(R)}$ (10% carbamide peroxide) was used for bleaching agent. The treated specimens were observed by confocal laser scanning microscopy and bonded with composite resin for shear bond test. The following results were obtained from this experiment : 1. Compared with the ENB group, the EBL group was shown be dyed about $20{\mu}m$ deeper with rhodamine B. The DBL group appeared to be caved in at the entry part of the dentinal tubules, was dyed about $20{\mu}m$ deeper and $5{\mu}m$ wider in diameter, compared with the DNB group. 2. In comparison with the EBLAC group, the ENBAC group looked evenly bonded with the resin, while the DNBAC group, compared to DBLAC group, was observed to have its resin tags penetrated about $50{\mu}m$ deeper. Other than those, however, no observable differences between ENBLA and EBLLA group or between DNBLA and DBLLA group were found. 3, At the shear bond test, the ENBAC group was shown to have statistically significant higher shear bond strength than the EBLAC group(p<0.05). No statistically significant differences between the ENBLA and the EBLLA groups were observed(p>0.05). 4. At the shear bond test, the DNBAC group was shown to have statistically significant higher shear bond strength than the DBLAC group(p<0.05). No statistically significant differences between the DNBLA and the DBLLA groups were observed(p>0.05). The in vitro observations above suggest that tooth-bleaching procedure brings a certain change on enamel and dentin surfaces and it weakens the shear bond strength with composite resin when the bleached tooth was acid-treated.

• Restorative Dentistry and Endodontics
• /
• v.31 no.2
• /
• pp.79-85
• /
• 2006

To evaluate the effect of vital tooth bleaching agent and alcohol pretreatment on dentin bonding, flat dentin windows were produced on the buccal side of the crowns of fifty-five extracted, human premolars. A bleaching gel, $Opalescence^{(R)}$ with 10% of carbamide peroxide (Ultradent Product, USA) was daily applied on the teeth of three experimental groups for six hours for 10 consecutive days, while teeth of a control group were not bleached. After 6 hours of bleaching gel application the specimens were washed and stored in saline until the next day application. After application of $One-step^{(R)}$ dentin bonding agent (Bisco, USA), $Z-250^{(R)}$ resin (3M-ESPE, USA) was bonded to dentin with a mount jig. Shear bond strength was measured with an Instron machine (Type 4202, Instron Corp., USA) after 24 hours. The results were analyzed using one-way ANOVA and Duncan's multiple range test at p < 0.05. Immediate bonding group showed significantly lower bond strength than un-bleached control group (p < 0.05). Ethanol-treated group showed significantly higher bond strength compared to immediate bonding group (p < 0.05). However, the bond strength of the ethanol treatment group was lower than that of the un-bleached control group (p < 0.05). There were no significant difference in shear bond strength between the 2-week delayed bonding group and the ethanol-treated group (p > 0.05) and between delayed bonding group and un-bleached control group (p > 0.05). In the condition of the present study. it seems that alcohol pretreatment after bleaching procedure can reduce the adverse effect of vital bleaching agent on dentin bonding.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.1
• /
• pp.19-29
• /
• 2018

Objectives: Despite a rise of an interest in tooth whitening, diverse problems are being caused in case of hydrogen peroxide that is being used as a tooth bleaching agent. Thus, the aim was to examine tooth whitening effectiveness using natural products as a plan for supplementing this. Methods: As a result of having measured a tooth color through using VITA Easyshade V after having developed toothpaste with the application of extracts such as Citrus Peels, Mulberry (Morus alba L.) Root Bark, strawberry, and lemon, and then having used it for 10 weeks, they are as follows. Both upper and lower 6 anteriors mostly got brighter. Results: A statistically significant difference was shown especially in the right canine (p=0.015), in the right central incisor (p=0.007), and in the left central incisor (p<0.001). In consequence of having measured a color change, the tooth got brighter gradually in the higher extract content and in the lengthier use time. In case of canine, it got less bright compared to other teeth. In the outcome of evaluating sensuality, most of the questions were indicated to be high in case of using a whitening toothpaste for 10 weeks. But in what "there is no stickiness in the mouth, the stickiness was more felt in the use up to 5 weeks, but was improved in 10 weeks. Conclusions: The bleaching effectiveness was proved by developing a toothpaste with the application of natural extracts. A short-term effect cannot be seen like a whitening agent of using hydrogen peroxide. But there is a continuous effect in consideration of tooth-brushing more than 3 times a day.

• Restorative Dentistry and Endodontics
• /
• v.43 no.3
• /
• pp.32.1-32.11
• /
• 2018

Objectives: This study evaluated the effects of a bleaching agent on the composition, mechanical properties, and surface topography of 6 conventional glass-ionomer cements (GICs) and one resin-modified GIC. Materials and Methods: For 3 days, the specimens were subjected to three 20-minute applications of a 37% $H_2O_2$-based bleaching agent and evaluated for water uptake (WTK), weight loss (WL), compressive strength (CS), and Knoop hardness number (KHN). Changes in surface topography and chemical element distribution were also analyzed by energy-dispersive X-ray spectroscopy and scanning electron microscopy. For statistical evaluation, the Kruskal-Wallis and Wilcoxon paired tests (${\alpha}=0.05$) were used to evaluate WTK and WL. CS specimens were subjected to 2-way analysis of variance (ANOVA) and the Tukey post hoc test (${\alpha}=0.05$), and KH was evaluated by one-way ANOVA, the Holm-Sidak post hoc test (${\alpha}=0.05$), and the t-test for independent samples (${\alpha}=0.05$). Results: The bleaching agent increased the WTK of Maxxion R, but did not affect the WL of any GICs. It had various effects on the CS, KHN, surface topography, and the chemical element distribution of the GICs. Conclusions: The bleaching agent with 37% $H_2O_2$ affected the mechanical and surface properties of GICs. The extent of the changes seemed to be dependent on exposure time and cement composition.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.3
• /
• pp.473-481
• /
• 2010

Objectives : To evaluate the effect of fluoride application on the color and microhardness of bleached enamel and compare it to that of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) application. Methods : Twenty freshly extracted human adult molar were each sectioned into halves, the specimens divided and treated according to five experimental groups: Group 1, treatment with 10% carbamide peroxide (CP) bleaching agent; Group 2, treatment with 10% CP followed by a 1.23% fluoride gel application; Group 3, treatment with 10% CP followed by a 2.23% sodium fluoride varnish application; Group 4, treatment with 10% CP followed by a 0.11% sodium fluoride gel application; Group 5, treatment with 10% CP followed by a CPP-ACP gel application. All groups were treated 6 h per day for 14 days then immersed in distilled water for 2 weeks. Changes in enamel color were evaluated on Baseline and Day 14. Microhardness were evaluated on Baseline, Days 7 and 14. Statistical analysis was performed using one-way ANOVA and post-hoc Tukey tests. Results : All the bleached enamel specimens revealed increased whiteness and overall color value. Group 1 showed the lowest microhardness values than that of Groups 2, 3, 4 and 5. In all groups, the hardness of tooth after bleaching showed a significant decrease in the microhardness as compared with the one prior to tooth bleaching. The specimens treated with remineralizing agents showed relatively less reduction in enamel microhardness than control group. Conclusions : The addition of fluoride and CPP-ACP did not impede the whitening effect. The use of remineralizing agents during bleaching treatment can significantly enhance the microhardness of bleached enamel.