• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.624-627
• /
• 2002

A study on machining electrode for LEO(Light Emitted Diode) mold with shaped end-mill is presented. The electrode machining by shaped end-mill has been used for maximizing the productivity in manufacture of semiconductor mold. However, it has not been researched systematically for many difficulties such as the making of shaped end-mill, generation of tool path due to distinctive tool geometry, and so on. Tool path is generated on the shaped end-mill geometry and cutting force to provide accurate and efficient machining of electrode. The verification program can drive enhancement of productivity, selecting cutting conditions from experiment function of cutting force. Also, compensation of tooting and machina error can make the electrode accurate by modifying tool path. Therefore, the research on machining with shaped end-mill can contribute to enhancement of accuracy and productivity in building semiconductor mold.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.616-619
• /
• 2002

The z-map structure is widely used for NC tool path verification as it is very simple and fast in calculation of Boolean operations. However, if the number of the x-y grid points in a z-map is increased to enhance its accuracy, the computation time for NC verification increases rapidly. To reduce this computation time, we proposed a NC verification method using 3-D graphic acceleration hardwares. In this method, the z-map of the resultant workpiece machined by a NC program is obtained by rendering tool swept volumes along tool pathos and reading the depth buffer of the graphic card. The experimental results show that this hardware-based method is faster than the conventional software-based method.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.197-205
• /
• 2015

Bladed disk (BLISK) is a vital part in jet engines with a complicated shape which is exclusively machined on a five-axis machine and requires high accuracy of machining. Poor quality of tool orientation (e.g., false tool positioning and unsmooth tool orientation transition) during the five-axis machining may cause collision and machine vibration, which will debase the machining quality and in the worst case sabotage the BLISK. This paper presents a reference plane based algorithm to generate a set of smoothly aligned tool orientations along a tool path. The proposed method guarantees that no collision would occur anywhere along the tool path, and the overall smoothness is globally optimized. A preliminary simulation verification of the proposed algorithm is conducted on a BLISK model and the tool orientation generated is found to be stable, smooth, and well-formed.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.187-194
• /
• 2002

A study on machining electrode for LED (Light Emitted Diode) mold with shaped end-mill is presented. The electrode machining by shaped end-mill has been used for maximizing the productivity in manufacturing semiconductor mold. However, it has not been researched systematically for many difficulties such as the making of shaped end-mill, generation of tool path due to distinctive tool geometry, and so on. Tool path is generated on geometry of the shaped end-mill and cutting force to provide accurate and efficient machining of electrode. The verification program can drive enhancement of productivity, selecting cutting conditions from experiment function of cutting force. Also, compensation of tooling and maching error can make the electrode accurately by modifying tool path. Therefore, the research on machining with shaped end-mill can contribute to enhancement of accuracy and productivity in building semiconductor mold.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.801-805
• /
• 2000

This paper presents a new method of tool path optimization. A NC verification model based Z-map was utilized to obtain chip load in feed per tooth. This developed software can regenerate a NC program from cutting condition and the NC program that was generated in CAM. The regenerated NC program has not only all same data of the ex-NC program but also the new feed rates in every block. The new NC data can reduce the cutting time and manufacture precision dies with the same chip load in feed per tooth. This method can also prevent tool chipping and make constant tool wear. This paper considered the effects of acceleration and deceleration in feed rate change.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.51-56
• /
• 2006

This paper proposes a control algorithm, which is verified experimentally, for aspherical surface grinding and polishing. The algorithm provides simultaneous control of the position and interpolation of an aspheric curve. The nonlinear formula for the tool position was derived from the aspheric equation and the shape of the tool. The function was partitioned at specific intervals and the control parameters were calculated at each control section. The position, acceleration, and velocity at each interval were updated during the process. A position error feedback was introduced using a rotary encoder. The feedback algorithm corrected the position error by increasing or decreasing the feed speed. In the experimental verification, a two-axis machine was controlled to track an aspherical surface using the proposed algorithm. The effects of the control and process parameters were monitored. The results demonstrated that the maximum tracking error with tuned parameters was at the submicron level for concave and convex surfaces.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.84-94
• /
• 1991

In order to achieve high accuracy of teaching and increase productivity using industrial robots in polishing process of dies, an off-line task programming system was developed on IBM-PC/386 under WINDOWS 3.0 operating system. The internal structure and the machematical basis of CAMPoli are described. Surface modeling technique of polishing dies with sculptured surfaces is introduced by poing data interpolation methodology through the use of CL-data transmitted from conventional CAM system. Tool selection, polishing speed, polishing pressure and kinds of tool motions can be determined and selected by user specified polishing variables. Task creation and verification of polishing path via computer graphics simulation of polishing tool can be done by the menu- driven function of CAMPoli system. Post-processing module is attached to generate robot language. Some simulation results are provided as verification means of the system.

• The KIPS Transactions:PartD
• /
• v.15D no.1
• /
• pp.99-106
• /
• 2008

Recently developed compilers perform some optimizations in order to speed up the execution time of source program. These optimizations require the reordering of the sequence of program statements. This reordering does not give any problems in a single-threaded program. However, the reordering gives some significant errors in a multi-threaded program. State-of-the-art model checkers such as JavaPathfinder do not consider the reordering resulted in the optimization step in a compiler since they just consider a single memory model. In this paper, we develop a new verification tool to verify Java source program based on Java Memory Model. And our tool is capable of handling the reordering in verifying Java programs. As a result, our tool finds an error in the test program which is not revealed with the traditional model checker JavaPathFinder.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2011

5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of cutter path and cutter posture at a cutter contact point. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various cutter paths, cutter postures types. Also, in order to increase the efficiency of 5-axis machining, it is necessary to minimize the cutter posture changes and create a continuous cutter path while avoiding interference. This study, by using an MC-space algorithm for interference avoidance and an MB-spline algorithm for continuous control, is intended to create a 5-axis machining cutter path with excellent surface quality and economic feasibility. finally, this study will verify the effectiveness of the suggested method through verification processing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.961-964
• /
• 1995

For geometric accuracy in the net shape machining, the problem of tool deflection should be resolved in some fashion. In particular, this is crucial in finish cut operation where slim tools are used. The purpose of this paper is to verify the validity and effectiveness of the prediction model of the machined surface. Experimental results are presented for the cut of steel material with HSS endmill of diameter 6mm on machining center. The results shows that 1) the machining error due totool deflection is serious even in the low cutting load, 2) by using the mechanistic simulation model with experimental coefficients, the machining error was predicted with maximum prediction error of 10% which was significantly reduced to the desired level by the path modification method.