• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.401-409
• /
• 2014

This research develops tools and strategies for optimizing RC column sections applied in tall buildings. Optimization parameters are concrete strength and section shape, the objective function for which is subject to several predefined constraints drawn from the original structural design. For this purpose, we developed new components for StrAuto, a parametric modeling and optimization tool for building structure. The components receive from external analysis solvers member strengths calculated from the original design model, and output optimized column sections satisfying the minimum cost. Using these components, optimized sections are firstly obtained for each predefined concrete strength applied to the whole floors in the project building. The obtained results for each concrete strength are comparatively examined to determine the fittest sections which will also result in the fittest vertical zoning for concrete strength. The main optimization scenario for this is to search for the vertical levels where the identical optimized sections coincide for the two different concrete strengths in concern, and select those levels for the boundaries where a concrete strength will be changed to another. The optimization process provided in this research is a product of an intensive development designed for a specific member in a specific project. Thus, the algorithm suggested takes on a microscopic and mathematical approach. However, the technique has a lot of potential that it can further be extensively developed and applied for future projects.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.2
• /
• pp.325-330
• /
• 2009

In Korea, medical diagnostic equipments and biochemical examination can not be used in order for diagnosing sub-healthy state or ante-disease state in oriental medicine clinic. So morphic analogical method used in oriental medicine can be a good tool as a disease-predictable signs in order to enable preventive diagnosis and therapy. Therefore the four geometrical subjects; Essence, Pneuma, Spirit, Blood(四科;精氣紳血) and the four taxonomical species; Pisces, Quadruped, Aves, Carapaces(四類;魚走鳥甲) are chosen as morphic models in this paper. The differences of two classifying methods with four subjects and four species were as follows. The diagnostic category was meta-medical and synthetic against medical specific. The diagnostic object was body in contrast with face. They were able to be applicant in psychology and classification of characteristics against diagnostics and therapeutics directly in oriental medicine. The theoretical basis was basic diagrams of four unit-fluids of body and morphological analogy with four animal species respectively. And the therapeutic aims were systemic pathogenesis following five phase theory against congestion and deficiency of Essence, Pneuma, Spirit, Blood. The four subjects and four species are mixed each other practically in clinic. But it should be used limitedly because of the above reasons described and must divide the principal and secondary factors and follow the pathology of principal shape factor. In order to improve the diagnostic value of ante-disease state, the discriminable standards, measurement methods, limit of interrelating interpretation and the criteria of abnormal disproportion were needed to be defined more clearly in advance.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.119-127
• /
• 2020

The purpose of this study is to verify the effect on the creativity and Usability of young Children by applying design education pro young Children gramfor using 3D printer to the kindergarten field and, through the results, to prepare a realistic way to increase the utilization of 3D printer media in infant classrooms. In order to achieve this research purpose, 38 infants aged 5 from G kindergarten located in metropolitan A are divided into each experimental group and comparative group, and from August 2017 to January 2018, data were collected through 15 experiments over a period of about 6 months. As a research tool, in the Korean version of Torrance's Creativity Test, an infant shape test and a usability test scale were used, and the data processing and analysis were conducted through technical statistical methods and covariance analysis. As a result of the study, the program using 3D printer had a statistically significant effect on promoting creativity and Usability of young Children, and in particular, it had a remarkable effect on the elaboration of creativity composition. Based on these results, discussions on the existing Nuri process, which mainly aims to cultivate creative talents, the possibility of connecting 3D printers more widely and the role of teachers were made.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.5
• /
• pp.532-538
• /
• 2002

This study was performed to classify the fatigue crack opening and closure for three kinds of aluminum alloy using principal component analysis (PCA). Fatigue cycle loading test was conducted to acquire AE signals which come from different source mechanisms such as crack opening and closure, rubbing, fretting etc. To extract the significant feature from AE signal, correlation analysis was performed. Over 94% of the variance of AE parameters could accounted for the first two principal components. The results of the PCA on AE parameters showed that the first principal component was associated with the size of AE signals and the second principal component was associated with the shape of AE signals. An artificial neural network (ANN) an analysis was successfully used to classify AE signals into six classes. The ANN classifier based on PCA appeared to be a promising tool to classify AE signals for fatigue crack opening and closure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.63-70
• /
• 2018

Objective: The aim of the study was to isolate gossypol-degrading bacteria and to assess its potential for gossypol degradation. Methods: Rumen liquid was collected from fistulated cows grazing the experimental pasture. Approximately 1 mL of the rumen liquid was spread onto basal medium plates containing 2 g/L gossypol as the only source of carbon and was then cultured at $39^{\circ}C$ to isolate gossypol-degrading bacteria. The isolated colonies were cultured for 6 h and then their size and shape observed by microscope and scanning electron microscope. The 16S rRNA gene of isolated colonies was sequenced and aligned using National Center for Biotechnology Information-Basic Local Alignment Search Tool. The various fermentation conditions, initial pH, incubation temperature, inoculum level and fermentationperiod were analyzed in cottonseed meal (CSM). The crude protein (CP), total gossypol (TG), and free gossypol (FG) were determined in CSM after fermentation with isolated strain at $39^{\circ}C$ for 72 h. Results: Screening results showed that a single bacterial isolate, named Rumen Bacillus Subtilis (RBS), could use gossypol as a carbon source. The bacterium was identified by 16S rDNA sequencing as being 98% homologous to the sequence of Bacillus subtilis strain GH38. The optimum fermentation conditions were found to be 72 h, $39^{\circ}C$, pH 6.5, moisture 50%, inoculum level $10^7cell/g$. In the optimum fermentation conditions, the FG and TG content in fermented CSM decreased 78.86% and 49% relative to the control. The content of CP and the essential amino acids of the fermented CSM increased respectively, compared with the control. Conclusion: The isolation of a gossypol-degrading bacterium from the cow rumen is of great importance for gossypol biodegradation and may be a valuable potential source for gossypol-degradation of CSM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.230-236
• /
• 2020

A trash screen is installed in front of the inflow channel of a drainage pumping station, sewage treatment plant, and a power plant to block floating contaminants. The bottleneck phenomenon, which decreases the water inflow, causes damage to the damper as a result of clogging in between the screen if string type obstacles are not removed. In this paper, the apron was removed, and the screen was expanded, to prevent breakage of the bottleneck phenomenon and string type obstacles. This was designed using an extended rake by adding an inner rake in between the screen interspace to remove the bottleneck phenomenon and string type obstacles. To design the inner rake that satisfies the allowable stresses of the existing damper rake, the experiment points were determined according to the experimental design method using the inner rake vertical length and the thickness of the reinforced section as parameters. The use of the ANSYS static structural module and statistical analysis tool R software gives the optimized shape according to the response surface method. The relative error between the response surface analysis results and the simulation results was 1.63% of the determined optimal design-point rake length of 210.2 mm and the reinforcement section thickness of 2 mm. Through empirical experiments, a test rake was constructed to the actual size, and approximately 97% of the bottleneck phenomenon and string type obstacles could be removed.

• Development and Reproduction
• /
• v.13 no.4
• /
• pp.217-226
• /
• 2009

Effects of sera from several fish species on monolayer formation, viability and functions of catfish hepatocytes were investigated to establish a primary hepatocyte culture system for screening endocrine disruptors. Hepatocytes of Korean catfish (Silurus asotus) were attached and formed monolayer using the media supplemented with their own serum or sera from eel and tilapia, but not with fetal bovine serum (FBS). The amount of fish sera (0.5~3%) for monolayer culture of the catfish hepatocytes was less than 1/10 of FBS (5~20%) that is commonly used for primary culture of hepatocytes of other species. The results indicate that FBS can be replaced with sera from some fish species and the fish sera are more effective than FBS in maintaining the shape and functions of the hepatocytes. The primary culture of catfish hepatocytes was maintained monolayer with fish sera for at least 10 days, which makes possible to be used for screening the activities of endocrine disruptors. In conclusion, the primary culture system of hepatocytes with fish sera in the present study could be a useful tool for screening and studying endocrine disruptors.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.53-74
• /
• 2010

The creation and acceptance of new technologies has been speeding up dramatically in modern times. There are also significant uncertainties about the future shape of markets, governance and social values that will have an important impact on organizations and their capacity to meet their objectives. These rapid technological and social change and uncertainties make the upsurge of interest in technology foresight, giving rise to its emergence as a global concept and policy tool. A wide range of future methods are available for technology foresight. Selection of methods will depend upon several factors, most notably available and the time financial resources, and the objectives of the exercise. Although Delphi has been widely used for many years, scenario becomes very popular in recent years. The use of scenarios can take better account of the complexity and unpredictability of the economic, social and political environments. Scenarios tell the stories describing paths to different futures, which help organizations make better decisions today. In this study, the scenario method was employed to draw the images of the future of renewable energy. Renewable energy grows dramatically in recent years. However, there is still considerable uncertainty with regard to the potential of renewable energy due to environment regulation, energy costs, and political and economic developments in the main supplier countries for oil and natural gas. Scenario can help us to identify the risks and opportunities when we develop the renewable energy, and to prepare for them. The scenario method is expected to be more utilized in the national technology foresight.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.209-231
• /
• 2015

In granite quarry, stones are generally quarried along easily separating planes called as 'rock cleavage'. Because orientation and characteristics of the rock cleavage are directly involved with easy quarrying, it is the most important factor on selecting a direction of digging. Using AMS (anisotropy of magnetic susceptibility), we attempt to interpret rock fabrics in Geochang Granite Stone (JS, SD, AR, GD, BW, MD quarry) and discuss about determination of rock cleavages and correlation between the rock fabrics and cleavages. Based on mean susceptibility, thermo-susceptibility curves, and hysteresis parameters, Ti-poor MD and/or PSD magnetites are the main contributor to AMS of the granite stones. The systematic magnetic foliations with sub-vertical dip angle are developed in the whole granite quarries. In most of the granite quarries, the magnetic foliations are significantly consistent with grain plane. In the BW quarry, which has higher $P_J$ values than the others, the magnetic foliations coincide exceptionally with rift plane. These results suggest that rock cleavages in granite stone are related to rock fabrics meaning shape and spatial arrangement of crystals. Magnetic fabrics analysis using AMS method, therefore, can be a quantitative and effective tool for determination of rock cleavages in granite quarry.

• Atmosphere
• /
• v.24 no.2
• /
• pp.173-188
• /
• 2014

The KMA has cooperated with the Oklahoma University in USA to develop a Polarimetric Radar Data (PRD) simulator to improve the microphysical processes in Korea Local Analysis and Prediction System (KLAPS), which is critical for the utilization of PRD into Numerical Weather Prediction (NWP) field. The simulator is like a tool to convert NWP data into PRD, so it enables us to compare NWP data with PRD directly. The simulator can simulate polarimetric radar variables such as reflectivity (Z), differential reflectivity ($Z_{DR}$), specific differential phase ($K_{DP}$), and cross-correlation coefficient (${\rho}_{hv}$) with input of the Drop Size Distribution (DSD) and scattering calculation of the hydrometeors. However, the simulator is being developed based on the foreign observation data, therefore the PRD simulator development reflecting rainfall characteristics of Korea is needed. This study analyzed a potential application of the 2-Dimension Video Disdrometer (2DVD) data by calculating the raindrop axis ratio according to the rain-types to reflect Korea's rainfall characteristics into scattering module in the simulator. The 2DVD instrument measures the precipitation DSD including the fall velocity and the shape of individual raindrops. We calculated raindrop axis ratio for stratiform, convective and mixed rainfall cases after checking the accuracy of 2DVD data, which usually represent the scattering characteristics of precipitation. The raindrop axis ratio obtained from 2DVD data are compared with those from foreign database in the simulator. The calculated the dual-polarimetric radar variables from the simulator using the obtained raindrop axis ratio are also compared with in situ dual-polarimetric observation data at Bislsan (BSL). 2DVD observation data show high accuracies in the range of 0.7~4.8% compared with in situ rain gauge data which represents 2DVD data are sufficient for the use to simulator. There are small differences of axis ratio in the diameter below 1~2 mm and above 4~5 mm, which are more obvious for bigger raindrops especially for a strong convective rainfall case. These differences of raindrop axis ratio between domestic and foreign rainfall data base suggest that the potential use of disdrometer observation can develop of a PRD simulated suitable to the Korea precipitation system.