• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.109-117
• /
• 2011

Purpose: To analyze the accuracy of tumor volume dose following field width change, to check the difference of dose change by using self-made moving car, and to evaluate practical delivery tumor dose when tomotherapy in the treatment of organ influenced by breathing. Materials and Methods: By using self-made moving car, the difference of longitudinal movement (0.0 cm, 1.0 cm, 1.5 cm, 2.0 cm) was applied and compared calculated dose with measured dose according to change of field width (1.05 cm, 2.50 cm, 5.02 cm) and apprehended margin of error. Then done comparative analysis in degree of photosensitivity of DQA film measured by using Gafchromic EBT film. Dose profile and Gamma histogram were used to measure degree of photosensitivity of DQA film. Results: When field width were 1.05 cm, 2.50 cm, 5.02 cm, margin of error of dose delivery coefficient was -2.00%, -0.39%, -2.55%. In dose profile of Gafchromic EBT film's analysis, the movement of moving car had greater motion toward longitudinal direction and as field width was narrower, big error increased considerably at high dose part compared to calculated dose. The more field width was narrowed, gamma index had a large considerable influence of moving at gamma histogram. Conclusion: We could check the difference of longitudinal dose of moving organ. In order to small field width and minimize organ moving due to breathing, it is thought to be needed to develop breathing control unit and fixation tool.

• Journal of the Korean earth science society
• /
• v.31 no.4
• /
• pp.392-402
• /
• 2010

The purpose of this study is to analyze and evaluate the self-directed learning contents of Earth science area in the basic course of the 7th grade. For this purpose, we applied the 'Cyber Home Study Content Quality Control Tool' presented in 'Elementary Secondary Education e-Learning Quality Management Guidelines (Ver.2.0)' of Korea Education & Research Information Service (2008). The results of contents analysis are as follow: First, it was presented that the study guide introduced the contents which should be studied for one class, properly. And it was not analyzed that the diagnosis assesment was not completed in the initiative study; Second, it was possible to study choosing the contents fitting the learner's level of learning in the main study, it was comprised of about 15 minutes. Third, it was performed without feedback for incorrect answers in the learning assessment, just the number of wrong questions. And the learning arrangement present the important contents learned in that class, summarizing and arranging again. The results of content evaluation are as follows: First, a big difference was not showed against the needs analysis, instructional design, interaction in each class. And the evaluation of the ethics was not included a word or sentence not suitable. The evaluation of copyright, it was analyzed that Work within the content display in compliance with international copyright Second, the evaluation of instructional design presented mainly the description of a simple picture based, the visible resources like flash card were poor. And in the evaluation of Supporting System, it was presented that the contents were installed so that it was freely available for learners. But it was analyzed that there was no memo-function learners were able to jot down something during the studying contents. And in the evaluation for evaluation, the clear valuation basis about the described content was not presented. So there were slightly differences for each class. Third, in the evaluation and analysis for learning content, it was presented that there were some big differences for each class because it was not composed of the latest information, not corrected and complementary.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.1
• /
• pp.76-82
• /
• 2009

Wheat is the most widely cultivated cereal and an important source of dietary protein worldwide. Wheat allergy, defined as an adverse immunologic reaction to wheat, encompasses a broad spectrum of disorders with different pathomechanisms and clinical manifestation. The Nuruk, a traditional Korean Koji for brewing, was made with wheat flour and fermenting microbes such as bacteria, yeast and mold. The strains grown on Nuruk secrete various enzymes as amylase and protease. By the activation of such enzymes, starch and proteins in Nuruk are hydrolyzed to sugar and amino acid. Therefore, it is supposed to reduce allergic proteins in wheat. To study quality properties and degradation degree of allergenicity in Nuruk by fermentation, we investigated the changes of general ingredients and allergenicity in Nuruk during fermentation. Moisture contents was decreased from 24.2% to 13.6% during fermentation. Crude lipid and protein contents were gradually increased during fermentation. After 15 days of fermentation, reducing sugar and total sugar contents were reached its maximum level, and they were 27.45% and 39.00%, respectively. Acid and neutral protease activity were significantly increased during fermentation, but alkaline protease activity was not detected. ${\alpha}$-amylase activity was gradually increased and showed maximum level about 2,833.00 U/g after 15 days of fermentation. Glucoamylase activity was the highest level about 497.9 U/g after 10 days of fermentation. The increase of these proteolytic and saccharogenic enzyme activities will provide efficient condition for production of rice wine. Also, protein fractions were isolated from Nuruk, and degradation of these proteins during fermentation were confirmed by SDS-PAGE. IgE immunoblotting using patient's sera with wheat allergy was performed to confirm allergenic protein in Nuruk. These results as fermentation of Nuruk will provide a useful tool for developing safer wheat products to prevent wheat allergy.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.119-120
• /
• 2004

Urban groundwater has a unique hydrologic system because of the complex surface and subsurface infrastructures such as deep foundation of many high buildings, subway systems, and sewers and public water supply systems. It generally has been considered that increased surface impermeability reduces the amount of groundwater recharge. On the other hand, leaks from sewers and public water supply systems may generate the large amounts of recharges. All of these urban facilities also may change the groundwater quality by the recharge of a myriad of contaminants. This study was performed to determine the factors controlling the recharge of deep groundwater in an urban area, based on the hydrogeochemical characteristics. The term ‘contamination’ in this study means any kind of inflow of shallow groundwater regardless of clean or contaminated. For this study, urban groundwater samples were collected from a total of 310 preexisting wells with the depth over 100 m. Random sampling method was used to select the wells for this study. Major cations together with Si, Al, Fe, Pb, Hg and Mn were analyzed by ICP-AES, and Cl, N $O_3$, N $H_4$, F, Br, S $O_4$and P $O_4$ were analyzed by IC. There are two groups of groundwater, based on hydrochemical characteristics. The first group is distributed broadly from Ca-HC $O_3$ type to Ca-C1+N $O_3$ type; the other group is the Na+K-HC $O_3$ type. The latter group is considered to represent the baseline quality of deep groundwater in the study area. Using the major ions data for the Na+K-HC $O_3$ type water, we evaluated the extent of groundwater contamination, assuming that if subtract the baseline composition from acquired data for a specific water, the remaining concentrations may indicate the degree of contamination. The remainder of each solute for each sample was simply averaged. The results showed that both Ca and HC $O_3$ represent the typical solutes which are quite enriched in urban groundwater. In particular, the P$CO_2$ values calculated using PHREEQC (version 2.8) showed a correlation with the concentrations of maior inorganic components (Na, Mg, Ca, N $O_3$, S $O_4$, etc.). The p$CO_2$ values for the first group waters widely ranged between about 10$^{-3.0}$ atm to 10$^{-1.0}$ atm and differed from those of the background water samples belonging to the Na+K-HC $O_3$ type (<10$^{-3.5}$ atm). Considering that the p$CO_2$ of soil water (near 10$^{-1.5}$ atm), this indicates that inflow of shallow water is very significant in deep groundwaters in the study area. Furthermore, the P$CO_2$ values can be used as an effective parameter to estimate the relative recharge of shallow water and thus the contamination susceptibility. The results of our present study suggest that down to considerable depth, urban groundwater in crystalline aquifer may be considerably affected by the recharge of shallow water (and pollutants) from an adjacent area. We also suggest that for such evaluation, careful examination of systematically collected hydrochemical data is requisite as an effective tool, in addition to hydrologic and hydrogeologic interpretation.ion.ion.

• Journal of Science Education
• /
• v.34 no.2
• /
• pp.225-236
• /
• 2010

The purpose of this study is to analyze and evaluate the Cyber Home Learning contents of Earth science area in the basic course of the $10^{th}$ grade. For this purpose, we applied the 'Cyber Home Study Content Quality Control Tool' presented in Elementary Secondary Education e-Learning Quality Management Guidelines (Ver.2.0)' of Korea Education & Research Information Service(2008). The results of Cyber home learning contents analysis are as follow: First, it was presented that the study guide introduced the contents which should be studied for one class, properly. And it was not analyzed that the diagnosis assesment was not completed in the initiative study; Second, it was possible to study choosing the contents fitting the learner's level of learning in the main study, it was comprised of about 10 minutes. Third, it was performed without feedback for incorrect answers in the learning assessment, just the number of wrong questions. And the learning arrangement present the important contents learned in that class, summarizing and arranging again. The results of evaluating the contents in Cyber Home Learning are as follows: First, in evaluation section of instructional design, many text materials which were so difficult for learners to read were explained, being provided. Besides, the systematic structures leaves much to be desired, in view of learners' learning experience, contents, and environment. And in evaluation section of learning contents, the error of contents caused the learning contents not to appear, the amount of learning in each section was found too much. Second, in evaluation section of the strategy for Teaching and Learning, when we mention the strategy of Self Directed Learning, the environment to make learners search for information free and self-study possible was not possessed well. And in evaluation section of interaction, it was found that a simple click caused the learning to go on. Third, in evaluation section of evaluating, it was evaluated that there was wanting in consistency in learning aims, contents, evaluation contents.

• Journal of Intelligence and Information Systems
• /
• v.22 no.4
• /
• pp.123-138
• /
• 2016

This study investigates intents of acquisitions in information technology industries. Mergers and acquisitions are a strategic decision at corporate-level and have been an important tool for a firm to grow. Plenty of firms in information technology industries have acquired startups to increase production efficiency, expand customer base, or improve quality over the last decades. For example, Google has made about 200 acquisitions since 2001, Cisco has acquired about 210 firms since 1993, Oracle has made about 125 acquisitions since 1994, and Microsoft has acquired about 200 firms since 1987. Although there have been many existing papers that theoretically study intents or motivations of acquisitions, there are limited papers that empirically investigate them mainly because it is challenging to measure and quantify intents of M&As. This study examines the intent of acquisitions by measuring specific intents for M&A transactions. Using our measures of acquisition intents, we compare the intents by four acquisition types: (1) the acquisition where a hardware firm acquires a hardware firm, (2) the acquisition where a hardware firm acquires a software/IT service firm, (3) the acquisition where a software/IT service firm acquires a hardware firm, and (4) the acquisition where a software /IT service firm acquires a software/IT service firm. We presume that there are difference in reasons why a hardware firm acquires another hardware firm, why a hardware firm acquires a software firm, why a software/IT service firm acquires a hardware firm, and why a software/IT service firm acquires another software/IT service firm. Using data of the M&As in US IT industries, we identified major intents of the M&As. The acquisition intents are identified based on the press release of M&A announcements and measured with four categories. First, an acquirer may have intents of cost saving in operations by sharing common resources between the acquirer and the target. The cost saving can accrue from economies of scope and scale. Second, an acquirer may have intents of product enhancement/development. Knowledge and skills transferred from the target may enable the acquirer to enhance the product quality or to expand product lines. Third, an acquirer may have intents of gain additional customer base to expand the market, to penetrate the market, or to enter a foreign market. Fourth, a firm may acquire a target with intents of expanding customer channels. By complementing existing channel to the customer, the firm can increase its revenue. Our results show that acquirers have had intents of cost saving more in acquisitions between hardware companies than in acquisitions between software companies. Hardware firms are more likely to acquire with intents of product enhancement or development than software firms. Overall, the intent of product enhancement/development is the most frequent intent in all of the four acquisition types, and the intent of customer base expansion is the second. We also analyze our data with the classification of production-side intents and customer-side intents, which is based on activities of the value chain of a firm. Intents of cost saving operations and those of product enhancement/development can be viewed as production-side intents and intents of customer base expansion and those of expanding customer channels can be viewed as customer-side intents. Our analysis shows that the ratio between the number of customer-side intents and that of production-side intents is higher in acquisitions where a software firm is an acquirer than in the acquisitions where a hardware firm is an acquirer. This study can contribute to IS literature. First, this study provides insights in understanding M&As in IT industries by answering for question of why an IT firm intends to another IT firm. Second, this study also provides distribution of acquisition intents for acquisition types.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.33-41
• /
• 2004

Purpose : Film has been the primary tool in coincidence testing between the light field and the radiation field, which constitutes the quality assurance list of a linear accelerator. But there is a great chance of errors being different among the observer when using film. Thus this study set out to use the BIS(Beam Image System) in addition to film in comparing and evaluating coincidence results between the two fields and in searching for the improvement measures. Materials & Methods : Photon beam of 6 and 15MV was exposed to film and the BIS using a linear accelerator. The light and radiation fields were each $50{\times}50,\;100{\times}100,\;and\;200{\times}200mm^2$. The gantry angle was $0^{\circ}$ when using film and $0^{\circ}\;and\;270^{\circ}$ when using the BIS. The devices adopted to test coincidence between the two fields were a ruler and film scanner when using film. With the BIS, the width of the scanned light and radiation fields was measured for errors with setting the X and Y axis. Results : The visual measurements of the observer with film resulted that the radiation field was bigger than the light field and that their maximum error was 1.9mm. The results were the same with the measurements using the film scanner except for the average error, which was less than 1.9mm. On the contrary, the measurements using the BIS showed that the light field was bigger than the radiation field at the gantry angle of $0^{\circ}\;and\;270^{\circ}$. The maximum error was 0.96mm, and the error range was $<{\pm}2mm$ both in the X and Y axis. The average error of ${\Delta}X$, Y was the smallest in the order of the visual film measurements, film scanner measurements, and BIS measurements Conclusion . This requires a careful measurement for accurate quality assurance since errors are much different according to each observer that tests coincidence between visual fields with film. And an observer needs to use another image device or develop a measuring device of his own if it seems necessary for accurate measurements.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.99-110
• /
• 2013

In the medical field, the necessity of education growth for the professional Radiation Technologists has been emphasized to become experts on radiation and the radiation field is important of the society. Also, in hospitals and companies, important on thesis is getting higher in order to active and cope with rapidly changing internal and external environment and a more in-depth expert training, the necessity of new teaching and learning model that can cope with changes in a more proactive has become. Thesis writing classes brought limits to the in-depth learning as to start a semester and rely on only specific programs besides, inevitable on passive participation. In addition, it does not have a variety opportunity to present, an actual opportunity that can be written and discussed does not provide much caused by instructor-led classes. As well as, it has had a direct impact on the quality of the thesis, furthermore, having the opportunity to participate in various conferences showed the limitations. In order to solve these problems, in this study, writing thesis has organized training operations as a consistent gradual deepening of learning, at the same time, the operational idea was proposed based on the connectivity integrated operating and effective training program & instructional tool for improving the ability to perform the written actual thesis. The development of teaching and learning model consisted of 4 system modeling, scaffolding, articulation, exploration. Depending on the nature of the course, consisting team following the personal interest and the topic allow for connection subject, based on this, promote research capacity through a step-by-step evaluation and feedback and, fundamentally strengthen problem-solving skills through the journal studies, help not only solving the real-time problem by taking wiki-space but also efficient use of time, increase the quality of the thesis by activating cooperation through mentoring, as a result, it was to promote a positive partnership with the academic. Support system in three stages planning subject, progress & writing, writing thesis & presentation and based on cognitive apprenticeship. The ongoing Coaching and Reflection of professor and expert was applied in order to maintain these activities smoothly. The results of this study will introduce actively, voluntarily and substantially join to learners, by doing so, culture the enhancement of creativity, originality and the ability to co-work and by enhance the expertise of based-knowledge, it is considered to be help to improve the comprehensive ability.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.327-341
• /
• 2021

The riparian eco-belt is an efficient technique that can reduce non-point pollution sources in the basin and improve ecological connectivity and health. In Korea, a legal system for the construction and management of riparian eco-belts is in operation. However, it is currently excluded that rivers and floodplains in dam reservoir that are advantageous for buffer functions such as control of non-point pollutants and ecological habitats. Accordingly, this study presented and analyzed a plan to select a site for an integrated riparian ecol-belt that comprehensively evaluates the water quality and ecosystem characteristics of each dam floodplain and riparian zone for the Daecheong Dam basin in Geum River watershed. First, the Daecheong Dam basin was divided into 138 sub-basin with GIS, and the riparian zone adjacent to the dam floodplain was analyzed. Sixteen evaluation factors related to the ecosystem and water quality impact that affect the selection of integrated riparian eco-belt were decided, and weights for the importance of each factor were set through AHP analysis. The priority of site suitability was derived by conducting an integrated evaluation by applying weights to sub-basin by floodplains and riparian zone factors. In order to determine whether the sites derived through GIS site analysis are sutiable for actual implementation, five sites were inspected according to three factors: land use, pollution sources, and ecological connectivity. As a result, it was confirmed that all sites were appropriate to apply integrated riparian ecol-belt. It is judged that the riparian eco-belt site analysis technique proposed through this study can be applied as a useful tool when establishing an integrated riparian zone management policy in the future. However, it might be necessary to experiment various evaluation factors and weights for each item according to the characteristics and issues of each dam. Additional research need to be conducted on elaborated conservation and restoration strategies considering the Green-Blue Network aspect, evaluation of ecosystem services, and interconnection between related laws and policy and its improvements.