• Korean Journal of Ecology and Environment
• /
• v.37 no.4 s.109
• /
• pp.462-468
• /
• 2004

Most of the surveys of periphyton carried out for environmental and ecosystem health assessment of streams have considered the impact made on their fixative substrates (stones, rocks, sand, silt, clay and other abiotic matters), but there has been virtually no research that considered moving substrates. This study attempted to make an analysis and assessment of the habitat environments of the microalgae attached to the skin surfaces of fish living in small streams, with a focus on their species composition and community structure. The dominant fish in the this survey were Zacco temmincki and Zacco platypus, which are usually found in the streams, and rivers, and they accounted for 62% and 19%, respectively, in relative abundance. Substrates of fish, a representative organism with the trait of moving a long distance, show a marked contrast with those of organisms fixed at a certain place. Characteristics of both the upstream and the downstream reach well reflected in the microalgae attached to the skin surface of fishes, of which diatoms took the major composition. The result of this observation is considered to be useful to provide basic data in assessment of stream health. Also it may be suggested as a biological tool for the assessment of aquatic environment in the future.

• Clinical and Experimental Reproductive Medicine
• /
• v.18 no.1
• /
• pp.63-71
• /
• 1991

To establish the normal fertile range in the results of the sperm zona-free hamster ova penetration assay (SPA) in Korean male, SPA using the low temperature ($4^{\circ}C$) capacitation in TEST-yolk buffer (TYB) was performed in 67 fertile and 26 infertile men. Sperm parameters in routine semen analysis were also checked and compared with the results of SPA. Sperm concentration, motility and motility index (MI) were significantly higher in fertile group compared with infertile group: $96.0{\pm}46.6$ vs $43.6{\pm}31.9{\times}10^6/ml$, $65.5{\pm}14.8%$ vs $45.8{\pm}23.6%$ and $46.31{\pm}13.29$ vs 27.40{\pm}17.98$, respectively. In fertile group, the hamster ova penetration rate (PR) was $98.5{\pm}5.0%$ (80%-100%), and the penetration index (mean penetrations per ovum, PI) was $9.59{\pm}6.35$(3.1-29.0). All the fertile men showed PI>3.0. In infertile group, PR was $24.6{\pm}24.8%$ (0%-70%), and PI was $0.40{\pm}0.42$ (0-1.3). Both PR and PI were significantly lower in infertile group. There was a significant correlation beween PI and sperm motility or MI, respectively, in fertile group whereas there was no correlation in infertile group. These data suggest that SPA using the low temperature capacitation in TYB can be a valuable diagnostic tool for the assessment of male fertility in vitro and provide an important supplement to the traditional tests of sperm quality.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.554-561
• /
• 2004

As the technologies of semiconductor and multimedia communication have been improved. the high-quality video and the multi-channel audio have been highlighted. MPEG Audio Layer 3 decoder has been implemented as a Processor using a standard. Since the synthesis filter of MPEG-1 Audio Layer 3 decoder requires the most outstanding operation in the entire decoder. the synthesis filter that can reduce the amount of operation is needed for the design of the high-speed processor. Therefore, in this paper, the synthesis filter. the most important part of MPEG Audio, is materialized in FPGA using the method of DAULT (distributed arithemetic look-up table). For the design of high-speed synthesis filter, the DAULT method is used instead of a multiplier and a Pipeline structure is used. The Performance improvement by 30% is obtained by additionally making the result of multiplication of data with cosine function into the table. All hardware design of this Paper are described using VHDL (VHIC Hardware Description Language) Active-HDL 6.1 of ALDEC is used for VHDL simulation and Synplify Pro 7.2V is used for Model-sim and synthesis. The corresponding library is materialized by XC4013E and XC4020EX. XC4052XL of XILINX and XACT M1.4 is used for P&R tool. The materialized processor operates from 20MHz to 70MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.15-25
• /
• 2012

The research on the FPGA CAD tools in academia has been lacking practicality due to the underlying FPGA fabric architecture which is too simple and inefficient to be applied for commercial FPGAs. Recently, the database of placement positions and routing graphs on commercial FPGA architectures has been built, and provided for enabling the academic development of placement and routing tools. To extend the limit of academic CAD tools even further, we have developed the evaluation toolkit for the K-FPGA architecture which is under development. By providing interface for exchanging data with a commercial FPGA toolkit at every step of mapping, packing, placement and routing in the tool chain, the toolkit enables individual tools to be developed without waiting for the results of the preceding step, and with no dependency on the quality of the results, and compared in detail with commercial tools at any step. Also, the fabric primitive library is developed by extracting the prototype from a reporting file of a commercial FPGA, restructuring it, and modeling the behavior of basic gates. This library can be used as the benchmarking target, and a reference design for new FPGA architectures. Since the architecture is described in a standard HDL which is familiar with hardware designers, and read in the tools rather than hard coded, the tools are "data-driven", and tolerable with the architectural changes due to the design space exploration. The experiments confirm that the developed library is correct, and the functional correctness of applications implemented on the FPGA fabric can be validated by simulation. The placement and routing tools are under development. The completion of the toolkit will enable the development of practical FPGA architectures which, in return, will synergically animate the research on optimization CAD tools.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.391-396
• /
• 2014

This study was conducted to be helpful to the expansion and development of hospice and to provide the basic data for Hospice palliative care by identifying the general characteristics of curriculum of hospice perception, level of perception, practice experiences, routes, times, meanings, needs, targets, supply, types, organizations, experiences, use of hospice and physical, emotional, social and spiritual aspects of hospice services. Study tools which were used in this study were composed of three sections. Survey paper is 3-point Likert scale which is composed of 6 questions of general characteristics, nominal scale of 24 questions about hospice perception and hospice service contents. Respondents can reply with 3 answers of Necessary (1), Mediocre (2), and Not necessary (3), in physical, emotional, social and spiritual aspects. Score ranges of this tool are from minimum of 24 points to maximum of 72 points and higher scores mean higher perception of Hospice. Hospice is a behavior to take care of terminal patients who are waiting for death and their family and it should be conducted physically, emotionally, socially and spiritually in order that the patients could meet their last moments of life by maintaining a high quality of life, human dignity and peace for the rest of their lives. Hospice could be mentioned to be a comprehensive care to relieve the pains and grieves of bereaved family.

• Archives of design research
• /
• v.19 no.6 s.68
• /
• pp.27-32
• /
• 2006

TYME is an interactive typography program based on the ephemeral nature of time. It is a text based poetic tool, built with Processing. This project is presented as a performance that utilizes a computer with a display screen, a projector, and speakers. As the user types, white characters appear, flow on the score on the screen and trigger jazz sounds, then characters disappear into black space in several seconds on the screen like smoke. Typography from this invented instrument is evocative and wistful, and allows the user to associate with ephemeral time. While typing the characters as though playing an instrument at intervals of time, the user can freeze the motion and print out or save otherwise fleeting moment with a button. I intend to contain both characteristics: the amorphous shape of smoke and the elusive attribute of smoke for the expression of intangible and ephemeral time. Every alphabetic shape is derived from the video dips that I shot of smoke. The resulting alphabetic images are then programmed using the Processing scripting language and which can then be typed on the screen with a keyboard. TYME could be a model as a project that reflects the unfixed quality of digital typography, and as a design approach for interactive expressive typography by scripting code. This project also represents the characteristics of typographic play, which can be realized in an computational environment like this model.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.2
• /
• pp.132-146
• /
• 2001

Purpose: This study was to analyze the trends and content of all the research (171 research papers) published in the Journal of Fundamentals of Nursing from 1994, when it began to 2000 using an objective tool developed by the researches, and to identify the direction for the future research in Fundamentals of Nursing. Method: Research published in the Journal of Fundamentals of Nursing from 1994 were reviewed. Result: Most of research (94.2%) was non-degree based and funded research was very limited. The average number of researchers per research study was 2.2 and collaborative research has been gradually increasing. The total number of key words was 331 and the average was 2.6 per research. The major key words were not different from other nursing departments and included home care nursing (10 times), health promotion (8 times), self-care (7 times). self-efficacy (7 times), and homo-dialysis (6 times). Eighty seven percent of the research was quantitative research. and there were very few qualitative studies. Considering theory level, it was found that 40% were factor related research For study design, non-experimental studies were most frequent (66%), and the rate, especially of surveys, has remarkably decreased. Selection of subjects by convenience sampling, was most frequent and there were very few studies that provided the rationale for the calculation of sample size. The major subjects of study were patients (44.8%) with various diagnoses. The subjects usually gave oral consent to take part in that study. Giving information (46.9%) and exercise (26.5%) were common nursing interventions, and physiological indices (16.5%). vital signs (10.3%), physical functioning (8.2%), level of knowledge/skill (7.2%) and level of activity (6.2%) were frequently measured as outcome. Variables questionnaires were the major approach used to collect data, and 57.8% of the research provided the Cronbach alpha to guarantee internal consistency of study instruments. Data were analyzed with computerized statistical packages using, ANOVA (42.0%), T test(39.5%), and chi-square test. For the last seven years, nursing research in Fundamentals of Nursing has gradually improved in both quantify and quality. Conclusion: It was difficult to find any uniqueness or difference compared to other departments of nursing. In fact, because the history of the Journal of Fundamentals of Nursing is rather short, we can expect that there will be further improvement in qualify and content in the future.

• Journal of Environmental Policy
• /
• v.12 no.3
• /
• pp.3-20
• /
• 2013

Recently, impacts and damages of extreme climate change have already affected on worldwide. Thus adaptation and action plan are essential concepts in minimizing the impacts of climate change. In order to introduce climate change adaptation decision-making measure, the need for high-quality and integrated information system within adaptation policy has increased enormously. However, most of adaptation information is based on different sources and various backgrounds. Currently, domestic climate change information is disseminated from about 132 internet sites and most of them are limited to general information of climate change, rather than information that are based on scientific evidence. Also, there are some difficulties in updating new resources. Reliable climate change information is provided from different agencies, which makes users difficult to locate right information they need. As a progress to overcome the limitations of these problems, we carried out a feasibility research on integrated information system for climate change adaptation. For the objectives, our solutions are as follows. First, we analyzed definition of climate change adaptation and climate change adaptation information. Second, we suggested integrating the information system for adaptation and phased implementation plan for establishing integrated information system for climate change. Finally, we verified the establishment of integrated support system based on policy applications of integrated information system. This system will provide an integrated climate change information and be a very useful tool to support the decision making process of effective climate change adaptation policies.

• Journal of Gastric Cancer
• /
• v.3 no.4
• /
• pp.182-185
• /
• 2003

Purpose: Preoperative staging of gastric cancer is crucial because the treatment modality and the prognosis depend upon the stage of gastric cancer. Current treatment modalities for early gastric cancer have focused on the quality of life. Endoscopic ultrasonography (EUS) and abdominal computed tomography (CT) are commonly used diagnostic tools to evaluate the invasiveness (T stage) of the primary tumor. The purpose of this paper is to evaluate the sensitivity and the specificity of preoperative EUS and CT in comparison with postoperative pathology. Materials and Methods: From October 2001 to October 2002, EUS and abdominal CT were performed simultaneously on 75 patients who underwent radical gastric surgery for the treatment of gastric cancer. Through analyzing the clinical T stage and the pathologic T stage, We evaluated the diagnostic sensitivities and specificities of endoscopic ultrasonography and abdominal computed tomography. Results: The male-to-female sex ratio was 1 : 0.6 (males: 47, females: 28). The mean age was 55.4 years in males (range: $28\~81$) and 54.4 years in females (range: $23\∼77$). The clinical T stage based on EUS included 22 T1mm, 7 T1sm, 22 T2, and 24 T3. The clinical T stage based on CT included 20 Tx, 23 T2, and 32 T3. The permanent pathologic report confirmed 23 T1mm, 10 T1sm, 17 T2, 24 T3, and 1 T4. The sensitivity and specificity of EUS were $84.2\%\;and\;94.7\%$, respectively. However, the sensitivity and specificity of abdominal CT were $53.3\%\;and\;77.0\%$, respectively. Conclusion: Our data suggest that EUS is a very useful diagnostic tool for evaluating the T stage of gastric cancer because EUS has higher specificity than abdominal CT. Therefore, EUS may have a significant role as a preoperative diagnostic modality in patients undergoing minimally invasive surgery.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.10
• /
• pp.1670-1676
• /
• 2018

Objective: This study was conducted to enable on-line prediction of primal and commercial cut weights in Korean slaughter pigs by AutoFom III, which non-invasively scans pig carcasses early after slaughter using ultrasonic sensors. Methods: A total of 162 Landrace, Yorkshire, and Duroc (LYD) pigs and 154 LYD pigs representing the yearly Korean slaughter distribution were included in the calibration and validation dataset, respectively. Partial least squares (PLS) models were developed for prediction of the weight of deboned shoulder blade, shoulder picnic, belly, loin, and ham. In addition, AutoFom III's ability to predict the weight of the commercial cuts of spare rib, jowl, false lean, back rib, diaphragm, and tenderloin was investigated. Each cut was manually prepared by local butchers and then recorded. Results: The cross-validated prediction accuracy ($R^2cv$) of the calibration models for deboned shoulder blade, shoulder picnic, loin, belly, and ham ranged from 0.77 to 0.86. The $R^2cv$ for tenderloin, spare rib, diaphragm, false lean, jowl, and back rib ranged from 0.34 to 0.62. Because the $R^2cv$ of the latter commercial cuts were less than 0.65, AutoFom III was less accurate for the prediction of those cuts. The root mean squares error of cross validation calibration (RMSECV) model was comparable to the root mean squares error of prediction (RMSEP), although the RMSECV was numerically higher than RMSEP for the deboned shoulder blade and belly. Conclusion: AutoFom III predicts the weight of deboned shoulder blade, shoulder picnic, loin, belly, and ham with high accuracy, and is a suitable process analytical tool for sorting pork primals in Korea. However, AutoFom III's prediction of smaller commercial Korean cuts is less accurate, which may be attributed to the lack of anatomical reference points and the lack of a good correlation between the scanned area of the carcass and those traits.