• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.309-314
• /
• 2004

A flexible disk grinding system process has been introduced that utilized varying disk orientation with respect to workpiece along with the applied feed speed. Various process conditions including cutting speed, maximum feed speed and orientation angles could applied to observe process outcomes. Even though continuous and constant feed speed has been applied to the process, the results from the trapezoidal input velocity profiles would be observed and compared. Based on the control strategies including neural network methodologies, several output results were compared to find the optimum process condition. Two axis control results were displayed showing better performance with higher trajectory error for larger training epoch.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.108-113
• /
• 2004

The compressive axial collapse tests were performed to investigate energy absorption characteristics of Al/CFRP compound tubes which are aluminum tubes wrapped with CFRP (Carbon Fiber Reinforced Plastics) outside the aluminum circular and square tubes. Based on collapse characteristics of aluminum tubes and CFRP tubes respectively, the axial collapse tests were performed for Al/CFRP compound tubes which have different fiber orientation angles. Test results showed that Al/CFRP compound tubes supplemented the unstable brittle failure of CFRP tubes due to ductile nature of inner aluminum tubes. In the light-weight aspect, specific energy absorption were the highest for Al/CFRP, CFRP in the middle, and aluminum the lowest. Also, specific energy absorption of circular tubes was higher than square tubes'. It turned out that fiber orientation angle of Al/CFRP compound tubes influence specific energy absorption together with the collapse modes of the tubes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.434-434
• /
• 2000

It is the main problem to measure the position and orientation of a robot end effector for the calibration of robots. The calibration methods can be used as a tool to improve the accuracy of robots without change of the arm or control architecture of robots. But such calibration methods require the accurate measurements. Dynamic measurement of position and orientation Provides a solution of this problem and improves dynamic accuracy by dynamic calibration o( robots. This paper describes the development o( the laser tracking system capable of determining the static and dynamic performance of industrial robots. The structure and system components are presented and basic experimental results are included to demonstrate the instrument performance. The system can be applied to the remote controlled mobile robots as weil as the calibration of robots.

• Journal of the Korean Home Economics Association
• /
• v.43 no.6 s.208
• /
• pp.37-46
• /
• 2005

Advertising is the most powerful marketing communication tool. Fashion magazines are a popular media for fashion advertising because of their multi-color visual printing. In this study, the interest in and attitude toward fashion advertising were investigated with high school girls in Seoul, along with their interrelation with buying experience and post-purchase satisfaction. The consciousness of the endorser and the fashion of celebrities both increased with rising interest in fashion advertisement. However, the brand orientation showed no relationship with the interest in fashion advertisement. The interest in fashion advertisement was useful to explain buying experience with limited variance. The correlation between brand orientation and buying experience increased with rising interest in fashion advertisement, indicating that those with little interest in fashion advertisement showed strong dependence on brand loyalty. Those with more interest in fashion advertisement counted distinctive aspects of fashion advertisement more seriously. Affective aspects of fashion advertisement showed a correlation with buying experience and post-purchase satisfaction.

• Journal of the Korean Society of Safety
• /
• v.16 no.3
• /
• pp.135-142
• /
• 2001

This study discusses frequency analysis based on the frequency spectrum and process characterization in orthogonal cutting of Fiber-matrix composite materials. A sparsely distributed idealized composite material, namely a glass reinforced polyester(GFRP) was used as workpiece The present method employs a force sensor and the signals from the sensor are processed using the fast Fourier transform(FFT) technique. The experimental correlations between the different chip formation mechanisms and power spectrum me established. Effects of fiber orientation, cutting parameters and tool geometry on the cutting mechanisms me also discussed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.24-29
• /
• 2002

In any rapid prototyping process, the layer by layer building process introduces an area error between the staircase and the surface line specified by the computer-aided design model. This affects the dimensional accuracy as well as the surface finish for different part build orientations. This paper describes a methodology for computing the area error for any orientation of the part built by the fused deposition modelling system. This technique can be applied to determine the best build orientation of the part, based on the minimum area error. This technique is verified by comparing the results with the experimental measurements of the area error of the parts built at different orientations.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.374-378
• /
• 2003

From linear motor feed system model, two axis control rules have been applied. As an application process, a flexible disk grinding system process has been also introduced that utilized varying disk orientation with respect to workpiece along with the applied feed speed. A known process model methodologies has been used to fomulate processed surface profiles. Various process conditions including cutting speed, maximum feed speed and orientation angles could applied to observe process results sensitivities. Even though continuous and constant feed speed has been applied to the process, the results from the trapezoidal input velocity profiles would be observed and compared.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.348-357
• /
• 2020

Discussions on entrepreneurship are increasing, but the methodology that can be applied to actual small to mid-sized businesses and venture firms is insufficient, and research on measuring achievement and application is lacking. In this regard, this paper analyzed actual proof on the relationship among entrepreneurial orientation, R&D capabilities, market share, and the creation of BSC future values that can be empirically applied to small to mid-sized businesses and venture firms. A factor analysis and hypothesis verification have been conducted with the SEM model utilizing SmartPLS 3.0 on the recent 7th year (2017) data from the Human Capital Corporate Panel (HCCP) of the Korea Research Institute for Vocational Education and Training. The actual proof analysis revealed that entrepreneurial orientation creates a positive influence on R&D capabilities and the creation of BSC, and also on market share, with R&D capabilities as a parameter. On the other hand, the relationship between entrepreneurial orientation and market share proved to be not statistically meaningful. Future value creation of BSC also could not mediate the relation between entrepreneurial orientation and market share. Therefore, this research has proven that a company must cultivate its personnel's R&D capabilities with their entrepreneurial orientation. Furthermore, it is a significant fact that BSC, the conventional measuring tool for performance management, could not mediate the relationship between entrepreneurial orientation and market share. Future companies aiming at innovation should consider developing a new index that could measure the corporate-level entrepreneurship and conduct performance management.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.58-63
• /
• 2004

This study is to investigate a fracture characteristics of carbon fiber reinforced plastics (CFRP) under the tensile loading as a function of acoustic emission (AE) according to the frequency analysis (transient mode) and AE source location (location mode). It was found that the fracture mechanism of AE frequency analysis was a useful tool for the estimation of different type of fracture in CFRP, i.e., matrix(epoxy resin) cracking, delamitation and fiber breakage same as AE amplitude distribution.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.186-194
• /
• 1997

This paper describes new methods to minimize the cutting time in zigzag milling operation of two dimensional polygonal surfaces. Previous works have been focused on mainly experimental approaches by considering some machining parameters such as, spindle speed, depth of cut, cutter traverse rate, cutter diameter, number of teeth, tool wear, life of tool, and so on. However, in this study, we considered two geometrical factors one by one in order to see the effect separately, which are the length of cut and the number of cutter traverse. In an N-sided concave or convex polygon, an algorithm has been developed which minimize the total length of cut. Also, a heuristic approach was used to minimize the number of cutter traverse.