• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.242-250
• /
• 2010

For economical and environmental reasons, the aim of this research is hence to monitor the cutting conditions with the dry cutting, the wet cutting, and the mist cutting to obtain the proper cutting condition for the plain carbon steel with the ball end milling based on the consideration of the surface roughness of the machined parts, the life of the cutting tools, the use of the cutting fluids, the density of the particles of cutting fluids dispersed in the working area, and the cost of cutting. The experimentally obtained results of the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and tool wear can be explained by the in-process cutting forces. The models of the tool wear with the cutting conditions and the cutting times are proposed to estimate the tool cost for the different cooling strategies based on the experimental data using the multiple regression technique. The cutting cost is calculated from the costs of cutting tool and cutting fluid. The mist cutting gives the lowest cutting cost as compared to others. The experimentally obtained proper cutting condition is determined based on the experimental results referring to the criteria.

• 대한공업교육학회지
• /
• 제32권2호
• /
• pp.171-187
• /
• 2007

이 연구의 목적은 선삭 가공시 발생하는 채터 진동을 계측하기 위하여 일반적인 가속도계가 가진 단점을 보완한 페브리-페롯형(Fabry-Prtot) 광섬유 간섭계 센서를 공구에 직접 부착하여 채터 진동을 측정하고 이것의 유용성을 확인하는 것이다. 측정된 주파수 스펙트럼과 이론해석 상의 리셉턴스 곡선과 비교하였는데 공구진동이 클수록 가진 주파수 이동이 생성되며 이는 공구의 날 끝에 질량효과가 더해짐을 의미함을 알 수 있었다. 질량효과가 더해지면 진동 주파수는 저주파 쪽으로 이동한다. 진동 주파수의 저주파 영역의 이동은 일반적인 재생형 채터에서 흔히 일어나는 현상이다. 또한 측정한 채터 주파수는 고유진동수가 아닌 외부 가진 주파수인 것으로 확인 됐으며 측정 결과와 같이 본 실험에 사용된 광섬유 센서는 외부 진동 주파수를 잘 계측 하였으며 페브리-페롯 센서는 특히 공구진동의 측정에 유용함을 보았다. 본 연구를 통하여 적용분야로 간섭계형 광섬유 센서를 공구 표면에 직접 설치하고 공구 진동을 관찰하는 교육목적의 실험에도 응용할 수 있다. 본 실험과 같은 페브리-페롯 간섭계 센서의 공구 직접 접촉식 방법에 대한 연구는 국내외 적으로 그 사례를 찾아보기 힘든 독창적인 방법인 것으로 추정된다. 본 연구결과는 또한 향후 공구진동과 마멸을 연구하는데 기초 자료로 활용할 수 있을 것으로 판단된다.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.33-43
• /
• 2009

This study analyzed data on the pore water pressure, the ground water level, the horizontal displacement and the resistivity monitoring from instrument system, which is established to evaluate the safety in reservoirs. The pore water pressure in the embankment ranged from $0.035{\sim}1.116kg/cm^2$. The seepage that piping showed, as well as the leakage from the reservoirs are acceptable for the safety management of the reservoir. The maximum horizontal displacement and direction analyzed from the measured inclinometer data gives us very effective information to evaluate the safety in reservoirs. The resistivity monitoring technique, which is obtained on the reservoir crest, is an efficient tool to detect leakage zone. The safety index (SI) was predicted by the resistivity monitoring, and was evaluated to have a safety level of 0.8-1.0 at all reservoirs. Safety evaluations of reservoir through instrument systems are effective when studying the embankment, when the results of the instrument system have been analyzed compositively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.840-851
• /
• 2010

This study analyzed data on the pore water pressure, the ground water level, the horizontal displacement and the resistivity monitoring from instrument system, which is established to evaluate the safety in reservoirs. The pore water pressure in the embankment ranged from $0.035{\sim}1.116kg/cm^2$. The seepage that piping showed, as well as the leakage from the reservoirs are acceptable for the safety management of the reservoir. The maximum horizontal displacement and direction analyzed from the measured inclinometer data gives us very effective information to evaluate the safety in reservoirs. The resistivity monitoring technique, which is obtained on the reservoir crest, is an efficient tool to detect leakage zone. The safety index(SI) was predicted by the resistivity monitoring, and was evaluated to have a safety level of 0.8-1.0 at all reservoirs. Safety evaluations of reservoir through instrument systems are effective when studying the embankment, when the results of the instrument system have been analyzed compositively.

• 한국수자원학회논문집
• /
• 제39권9호
• /
• pp.801-812
• /
• 2006

본 연구에서는 PDSI, SPI, MSWSI 등의 가뭄지수를 이용하여 가뭄을 단계별로 모니터링 할 수 있는 통합가뭄지수를 개발하였으며 개발된 통합가뭄지수에 의해 작성된 한반도의 가뭄도를 과거 가뭄과 비교 검증한 결과 매우 잘 일치하는 결과를 얻을 수 있었다. 따라서 통합가뭄지수가 가뭄을 정량적으로 모니터링 하는데 유용한 지표로 활용될 수 있을 것으로 판단된다 또한, 기상청에서 시행하고 있는 기온, 강수량의 장 단기 예보자료를 이용하여 가뭄지수의 예측치를 산정 한 후, 미래에 가뭄상황이 어떻게 진행될 것인가에 대한 가뭄전망기법을 개발하였으며 한반도 전역에 대한 실시간 가뭄전망이 가능하도록 전체 시스템을 구축하였다. 뿐만 아니라 가뭄기초 자료 관리, 가뭄지수 산정 및 가뭄현황도 작성 등 종합적인 가뭄정보 분석을 위한 가뭄 모니터링시스템을 개발하여 웹을 통하여 일반인들에게 제공할 수 있도록 시스템을 구축하였다.

• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.205-211
• /
• 2003

구조물의 안전성평가와 관련하여 비파괴평가 방법 중에서 음향방출 (acoustic emission, AE)기법에 의한 비파괴적 결함 발생 검출 기법은 다른 기법에 비해 비교적 새로운 평가기술로서 구조물의 이상 유무를 조기에 진단하고 주기적으로 감시할 수 있는 온-라인 모니터링에 적합하다. 그러나 한편, 국내에서는 아직까지 이에 대한 체계적인 연구가 미비한 실정이며, 대부분 값비싼 외국 시스템을 도입하여 사용하고 있는 실정이다 뿐 만 아니라 기존의 음향방출 시스템은 장치의 특성상 시스템이 매우 복잡하고 가격이 고가인 관계로 다양한 산업분야에서 실제 현장에 적용하기가 쉽지 않다. 따라서 본 연구에서는 기존의 음향방출 시스템이 가지고 있던 불필요한 낭비적인 요소들을 제거하고 실제 산업현장에 부합하는 위치표정 시스템을 개발하고자 하였다. 한편, 기존의 AE 시스템들은 위치표정을 위한 신호분석이 난해할 뿐만 아니라 박판 구조물의 경우는 위치표정이 매우 어렵다. 본 연구에서는 시간-주파수 해석에 널리 사용되고 있는 웨이블릿 기법을 이용하여 보다 정확한 위치표정을 진단하는 기법을 수행하였다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제17권1호
• /
• pp.23-30
• /
• 2014

Manometry is a noninvasive diagnostic tool for identifying motility dysfunction of the gastrointestinal tract. Despite the great technical advances in monitoring motility, performance of the study in pediatric patients has several limitations that should be considered during the procedure and interpretation of the test results. This article reviews the clinical applications of conventional esophageal and anorectal manometries in children by describing a technique for performing the test. This review will develop the uniformity required for the methods of performance, the parameters for measurement, and interpretation of test results that could be applied in pediatric clinical practice.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.429-436
• /
• 2004

For the in-situ health monitoring of critical members in civil infra-structures, ultrasonic guided Lamb waves-based non-destructive evaluation (NDE) is very suitable. However, a chief drawback of the Lamb wave techniques is that multiple modes exist at all frequencies and the modes are generally dispersive, which means that the received signals may be very complicated. To overcome these complications, selective transmitting and receiving of a single A/sub 0/ mode within a frequency range can be adopted. Furthermore, a wavelet technique can be utilized to decompose the Lamb wave response into wavelet coefficients as a tool for signal processing. The changes in the Lamb waves interacting with damages in the steel plates are successfully characterized by this wavelet technique, through the amplitude change of the wavelet coefficients. In this paper, the feasibility of detecting a line crack on the surface of a steel plate and loosened bolts in a joint steel specimen using the Lamb waves and the wavelet technique is investigated.

• 한국건설관리학회논문집
• /
• 제9권6호
• /
• pp.268-276
• /
• 2008

In highway construction projects, concrete pavement productivity has been challenged with constructors and decision-makers; at present there are few methods available to accurately evaluate the factors impacting on it. Any inefficient method to analyze it leads to the excessive schedule, higher rehabilitation costs, shorter service life, and reduction of ride quality. To implement these negative outcomes, constructors or decision-makers need a systematic tool that can be used to categorize the factors related to construction productivity. This paper applies multiple regression technique for productivity analysis of the Jointed Plane Concrete Pavement (JPCP), identifies the significant factors, and provides a predictive model assisting in monitoring and managing the productivity of the JPCP construction process. The completed and progressive projects are employed to derive and assess the proposed model. The results are analyzed to illustrate its capabilities.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1287-1294
• /
• 2003

The wear process of end mill is so complicated process that a more reliable technique is required for the monitoring and controlling the tool life and its performance. This research presents a new tool wear monitoring method based on the sound signal generated on the machining. The experiment carried out continuous-side-milling for 4 cases using the high-speed-steel end mill under wet condition. The sound pressure was measured at 0.5m from the cutting zone by a dynamic microphone, and was analyzed at frequency domain. As the cutter impacts the workpiece surface, a situation of farced vibration arises in which the dominant forcing frequency is equal to the tooth passing frequency of the cutter. The tooth passing frequency appears as a harmonics form, and end mill flank wear is related with the first harmonic. It is possible to detect end . mill flank wear. This paper proposed the new method of the end mill wear detection.