• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.189-195
• /
• 2008

We developed emission factors for alternative fuels used in cement industries in Korea and also estimated reduction in emissions of greenhouse gas (GHG) by the use of alternative fuels. Emission factors for GHG of waste tire, waste plastic, waste oil and RDF were estimated to be about 89, 78, 77 and 95 ton $CO_2$/TJ respectively. When compared with previous studies, most of the results showed similar trends. The calorific value estimation and elemental analysis for energy source were implemented in order to estimate the exact emission factors and the reduction of GHG emissions using alternative fuel. In the case of 'A' company, $CO_2$ emission from alternative fuels was about 4% lower than that of bituminous coal only. Also in case of company 'B', $CO_2$ emission from alternative fuels was about 1.4% lower than that of only bituminous coal. In Germany and Japan, alternative fuel is not regarded to be fuel consumption in cement industry. When applying this rule, the emission reductions were about 4.3% for company 'A' and 6.3% for company 'B'. The results of this study may be considered as a useful information for developing strategies in reducing GHG emissions.

• Advances in pediatric surgery
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2001

The aims of this study were to evaluate the prognostic predictabilities of the risk classifications (Waterston, Montreal, and Spitz), preoperative treatment of pneumonia and the length of esophageal gap in esophageal atresia. Twenty-five cases of esophageal atresia were reviewed retrospectively. The data was analyzed with Likelihood ratio test for trend and Fisher's exact test. Survival rates were 100.0 % in group A and B, and 60.0 % in group C according to Waters ton classification (p=0.027). By Montreal classification, 95.7 % in group I and 50.0 % in group II (p=0.086). By Spitz classification, 95.5 % in group I and 66.7% in group II (p=0.159). The survival rate was 85.7 % in the patients with pneumonia preoperatively treated and 94.4% in the patients without pneumonia. The difference was not significant (p=0.490). Survival rate in the patients with long gap (${\geq}$3cm) was 50.0 % and 100.0 % in patients with short gap (<3cm) with significant difference (p=0.020). The Waterston classification could be modified into two groups because the prognosis of both group A and B were the same. Preoperative pneumonia does not seem to be a risk factor. The length of the esophageal gap showed prognostic value.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.55-60
• /
• 2001

The effect of high energy B ion implantation and initial oxygen concentration upon defect formation and gettering of metallic impurities in Czochralski silicon wafer has been studied by applying DLTS( Deep Level Transient Spectroscopy), SIMS(Secondary ton Mass Spectroscopy), BMD (Bulk Micro-Defect) analysis and TEM(Transmission Electron Microscopy). DLTS results show the signal of the deep levels not only in as-implanted samples but also in low and high temperature annealed samples. Vacancy-related deep levels in as- implanted samples were changed to metallic impurities-related deep levels with increase of annealing temperature. In the case of high temperature anneal, by showing the lower deep level concentration with increase of initial oxygen concentration, high initial oxygen concentration seems to be more effective compared with the lower initial oxygen one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1279-1287
• /
• 2014

The Korean government establishes a strategy to develop the Busan New Port as a world ranking two transit-oriented port. This paper aims at presenting an efficient inter-terminal transport (ITT) system in the Busan New Port as a method of achieving the government strategy. First, it presents results of long term forecast for the inter-terminal transportation volume in the port. Second, it proposes two systems to treat ITT in the port; Double stack Multiple Trailer System (DMTS) and Rail-based transportation system. The implementation methods in the port are introduced in detail for the both systems, and the required number of the systems and costs are calculated for implementation of both the systems. B/C for DMTS is analyzed to 3.7, moreover unit-fare per [$ton{\cdot}km$] can is lowered to 67% against current fare. DMTS is shown to highly potential for efficient ITT in the port.

• Journal of Microbiology
• /
• v.45 no.3
• /
• pp.219-226
• /
• 2007

Insertion sequence IS1112 is a repetitive element with a relatively high number of copies in Xanthomonas oryzae pv. oryzae (Xoo), the causal agent of bacterial blight of rice (Oryza sativa L.). Three new loci of IS1112 were identified in seven Chinese strains of Xoo using a single oligonucleotide primer J3; 5'-GCTCA GGTCAGGTGGCCTGG-3' by insertion-sequence-based polymerase chain reaction (IS-PCR). Among the three new loci of IS1112, two were located in the open-reading frame region of genes fhuA and cirA, which encode TonB-dependent receptors, and the third in ISXo2, another type of insertion sequence in Xoo genome. Three variants of IS1112 were identified in those three loci based on their sequence similarities: two were identical to IS1112a and IS1112b, reported in strain PXO86 from the Philippines, while the third was a new member of IS1112, defined as IS1112d. Inserting IS1112 in gene fhuA caused three bases, GGT, to be duplicated at the target site, but inserting it in gene cirA did not cause any duplication in the target site. The diversity of IS1112 sequence and insertion loci in Xoo genome and their potential effects are discussed.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.537-545
• /
• 2019

Stress analysis of bottom-hole rock has to be considered with much care to further understand rock fragmentation mechanism and high penetration rate. This original study establishes a fully coupled simulation model and explores the effects of overburden pressure, horizontal in-situ stresses, drilling mud pressure, pore pressure and temperature on the stress distribution in bottom-hole rock. The research finds that in air drilling, as the well depth increases, the more easily the bottom-hole rock is to be broken. Moreover, the mud pressure has a great effect on the bottom-hole rock. The bigger the mud pressure is, the more difficult to break the bottom-hole rock is. Furthermore, the maximum principal stress of the bottom-hole increases as the mud pressure, well depth and temperature difference increase. The bottom-hole rock can be divided into three main regions according to the stress state, namely a) three directions tensile area, b) two directions compression areas and c) three directions compression area, which are classified as a) easy, b) normal and c) hard, respectively, for the corresponding fragmentation degree of difficulty. The main contribution of this paper is that it presents for the first time a thorough study of the effect of related factors, including stress distribution and temperature, on the bottom-hole rock fracture rather than the well wall, using a thermo-poroelastoplasticity model.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.215-220
• /
• 2011

In order to estimate the inorganic nutrient content in cucumber leaves at respective growth stages under greenhouse conditions, we investigated five cucumber farms practicing a forcing cultivation system with nine-month growth period and another five cucumber farms practicing a semiforcing cultivation system with six-month growth period. The cucumber yield in forcing and semiforcing cultivation systems amounted to 14.8 ton $10a^{-1}$ and 10.7 ton $10a^{-1}$, respectively. Soils between two different cultivation systems showed no significant differences in pH, organic matter contents and exchangeable cation contents during early growth stage, whereas EC, $NO_3$-N and available $P_2O_5$ contents were higher in soils of semiforcing cultivation systems. Suitable soil temperature was well provided by forcing cultivation. The highest NPK contents in leaves were observed in 60~80 days after planting for forcing systems and in 100 days after planting for semiforcing systems. Thereby forcing cultivation systems showed somewhat higher NPK contents. Ca and Mg contents in cucumber leaves did not significantly change during the growth period in forcing systems, while semiforcing systems showed the highest contents of Ca and Mg in 80~100 days after planting. Fe, Mn and Zn contents in leaves also did not significantly change during the growth period, whereas Mn contents were slightly higher in forcing systems due to lower soil pH. B contents in leaves were higher in semiforcing systems because of higher available B contents in soil.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.67-73
• /
• 2015

This is a basic research for improving soft magnetic property of Fe based nano crystalline alloy powder core. The main study is done around characteristics of permeability, core loss, and DC bias depending on amount of insulation coating agent and particle size. First, $Fe_{73.5}Si_{13.5}B_9Nb_3Cu_1$ amorphous alloy ribbon was fabricated by using the planar flow casting (PFC) device. Then, heat treatment and ball milling were done to obtain alloy powder. The amount of polyether imide (PEI) added to it was varied by 0.5, 1.0, 2.0, 2.5 wt% to have compression molding into $16ton/cm^2$. After going through crystalline heat treatment, the made toroidal nano crystalline powder core ($OD12.7mm^*ID7.62mm^*H4.75mm$) had smaller permeability as amount of insulation coating agent decreases. However, it was found out that core loss and DC bias characteristics have been improved. The reason for this results were expected to be because green density of power core decreases as amorphous alloy powder particles become smaller as amount of alloy powder insulation coating agent increases, it was determined that 1 wt% of insulation coating agent is appropriate. Also, for powder core made based on alloy powder size with amount of insulation coating agent fixed at 1 wt%, effective permeability and core loss were outstanding as particle size became bigger. However, characteristics of DC bias became worse as applied DC field increases. This is expected to be due to insulation effect, residual pores, or molding density of powder core resulting from thickness of coating on surface of alloy powder.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.99-106
• /
• 2006

Aircraft measurements have been executed for the purpose of monitoring the long range transported air pollution and estimation of air pollutant in/out-flux over the Yellow sea. Total 74 missions of measurements have been done since 1997, mainly in spring and fall. The main study domain was over $124^{\circ}$E $/sim$ $124^{\circ}$E, $35^{\circ}$N $/sim$ $37^{\circ}$N below 3,000m. In long-term trends, mixing ratios of $SO_{2}$N were around 2 ppbv expect in summer ( < 1 ppbv). NOx exhibited 24 ppbv and have no clear annual trends over the Yellow Sea. The concentrations of 03 were 51, 58, 41 ppbv in spring, summer and fall-winter, respectively. Backward trajectory was performed for three days to investigate the source regions of the air mass. Six regions were divided around Korea peninsular centering at $36^{\circ}$N, $126^{\circ}$E. I, II, III, IV and V regions represents in sequence northeast China and Siberia, Sandong peninsula and Balhae gulf, Sanghi and southern China, the south Pacific included Jeju island and the East sea included Japan. L region correspond to the airmass from Korea peninsula. Influx of $SO_{2}$N was approximately five times higher than outflux in yearly flux variation and showed a decreasing long-term trend since 1998. NOx outflux was average 0.095 ton/km/hr and three times higher than $SO_{2}$ outflux. In/out flux of 03 showed even distribution in yearly basis except 2002 (influx 5.45 ton/km/hr). The transported amounts from I, II, III regions were much higher than those from other region. In seasonal flux variation, influx levels of gas phases were the lowest in summer and the levels gradually increased from fall toward spring. As a result, transport of pollutants begins from fall and prevails in winter and spring.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.102-113
• /
• 2000

This study was conducted to investigate the expandibility of sludge treatment by earthworm through real scale experiment and the optimum counter-plan for organic sludge treatment. For the purposes, sludge removal efficienciesof night-soil using earthworm and it's behavior according to the transplanting methods of the earthworm on non-cover worm bed or in the green house worm bed were compared. Sludge uptake rates on non-cover worm bed for 6 months were $0.27{\sim}0.33ton/m^2$ and the excrement of earthworm yields $0.15ton/m^2$(44.1~46.7% of raw night soil sludge dosage). These results were not much different from the worm bed in the green house. The average and maximum earthworm density were about $6.5kg/m^2$ and $7kg/m^2$ respectively on the non-cover worm bed. The density of the worm bed was comparatively higher in spring and fall terms but lower in summer. The amount of old earthworm was much plenty than young earthworm on the non-cover worm bed, resulting in reverse distribution type of pyramid. From the experiments on non-cover worm bed(7,000 pyeong)and in the green house worm bed(1,200 pyeong), it was concluded that landfill and transporting cost could be reduced when the earthworm was applied for the night-soil sludge treatment. Profits from the excrement sale of earthworm was 9,600,000 won. Through this study, it was founded that earthworm treatment method for organic sludge are much more environmentally sound than landfill treatment.