• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.386-395
• /
• 2009

Business entities with which most service components interact are kind of cross-cutting concerns in a multi-layered distributed application architecture. When business entities are modified, service components related to them should also be modified, even though they implement common functions of the application framework. This paper proposes what we call DTT (Data Type-Tolerant) component model to process the variability of business entities, or externalized data, which feature modern application architectures. The DTT component model expresses the data variability of product lines at the implementation level by means of SCDTs (Self-Contained Data Types) and variation point interfaces. The model improves the efficiency of application engineering through data type converters which support type conversion between SCDTs and business entities of particular applications. The value of this model lies in that data and functions are coupled locally in each component again by allowing service components to deal with SCDTs only instead of externalized business eutities.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.11
• /
• pp.23-29
• /
• 2010

This paper presents a method for constructing a memory system using defective memory chips comprising faulty storage blocks. The three-dimensional memory system introduced here employs a die-stacked structure of faulty memory chips. Signals lines passing through the through-silicon-vias (TSVs) connect chips in the defect tolerant structure. Defective chips are classified into several groups each group comprising defective chips having faulty blocks at the same location. A defect tolerant memory system is constructed using chips from different groups. Defect-free storage blocks from spare chips replace faulty blocks using additional routing circuitry. The number of spare chips for defect tolerance is $s={\ulcorner}(k{\times}n)/(m-k){\urcorner}$ to make a system defect tolerant for (n+s) chips with k faulty blocks among m independently addressable blocks.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2000

Improvement of cold-tolerance of Italian ryegrass(Lo1ium multiflorum L.) is an important breeding objectivefor enlargement of cultivation area in Korea. To develop the cold-tolerant variety of Italian ryegrass,cold-tolerant clones survived under - 13- - 14$^{\circ}$C of minimum average air temperature in January wereselected in the area of Dun Nae, Kwangwon Province. The 5 lines of Italian ryegrass clones selected werepolycrossed for seed production. Synthetic seeds were examined on growth characters and forage productionsin Suwon from 1996 to 1998, in Unbong 1997 and in Younchun 1998, respectively. The growth charactersand forage productions of Italian ryegrass variety named as "Hwasan 101" were summarized as follow ;ltalian ryegrass variety, Hwasan 101 was tetraploid and showed semi-prostrate growth habit in autumn andwas not only dark green in leaf color and broad in flag leaf width but also excellent in leafiness. Also, itshowed low plant height at first heading date of 20th May and excellent lodging tolerance. Expecially,Hwasan 101 in all trial regions was 80 -90% of winter survivals that was higher than 60 -90% of Florida80 and Marshall varieties. Therefore we estimate that Hwasan 101 can be cultivated in regions that is higherthan -9$^{\circ}$C in minimum average air temperature and lower than 400m in sea level. In forage production ofHwasan 101, fresh weight and total digestible nutrient(TDN) yield were 66,940 and 6,551kghq and drymatter yield was 10,050kgha. In conclusion, Italian ryegrass, Hwasan 101 was medium and late maturingvariety but excellent in cold-tolerance, lodging-tolerance, leafiness, and forage production.(Key words : Italian ryegrass, Cold tolerance, New variety)ian ryegrass, Cold tolerance, New variety)

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.107-112
• /
• 2004

The combining abilities in the 5 newly evolved thermo tolerant breeds viz., SR6, SR7, SR8 SR9 and SR10 of silkworm Bombyx mori L. and their 15 hybrids were made in a line${\times}$tester crossing programme. Data were analysed for seven quantitative traits i.e., pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio, filament length and raw silk percentage under optimum room temperature $(25{\pm}{1^{\circ}C})$ conditions (In case of high temperature $(36{\pm}{1^{\circ}C})$ stress conditions five economic traits except filament length and raw silk percentage) with 3 widely adapted testers i.e., KA, CSR2 and CC1 as lines (females) and testers (males) respectively. The performance at high temperature and low humidity conditions aye only taken into consideration for selecting the best lines/hybrids. Among the lines SR6 exhibited positive General combining ability (GCA) effects for pupation rate, cocoon yield, cocoon weight and cocoon shell ratio traits, followed by SR7 for pupation rate, cocoon yield and cocoon shell weight and cocoon shell ratio. Among testers, KA exhibited positive GCA effects for two quantitative traits cocoon yield, cocoon weight and CSR2 for cocoon shell weight and cocoon shell ratio under adverse temperature conditions. The hybrid SR6${\times}$CC1 and SR7${\times}$CSR2 exhibited significant positive Specific combining ability (SCA) effects for majority of the traits in high temperature stress conditions of rearing. The better parent value of heterosis(Heterobeltiosis) was exhibited by the hybrid SR6${\times}$CC1 for pupation rate, cocoon yield, cocoon weight and cocoon shell weight and SR7${\times}$CSR2 for all the trails evaluated under high temperature conditions. Based on the results, the lines SR6 and SR7 was judged as best combiners and the hybrids SR6${\times}$CC1 and SR7${\times}$CSR2 can be selected for commercial exploitation in tropical climate.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.85-93
• /
• 2008

In 22.9[kV]-y distribution systems, underground cables are provided with 3-wire loop multiple-point ground in which each coaxial-neutral line of the distribution cable lines(A, B, C phases) is 3-wire common grounded at every connecting section. In the underground cable distribution systems, circulating current flows in the coaxial-neutral lines and its magnitude amounts to about $40{\sim}50[%]$ load currents, even though loads are balanced. This paper presents a new ground method to overcome such a problem and a comprehensive analysis in tows of current capacity of power cables, induced voltage of cable sheath, and electromagnetic interference voltage from power cable lines.

• Journal of Plant Biotechnology
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2003

Resistant cell lines to azetidine-2-carboxylic acid (AZCA) were selected through rice embryo culture after mutagenic treatment of callus irradiated with 30,50,70,90 and 120 Gy. The optimum AZCA concentration for the selection of resistant cell lines was 3 or 4 mM AZCA considering $LD_{50}$ and the fresh weight of callus. Survival rate of the AZCA resistant callus showed remarkable increase in the callus irradiated with 50 and 70 Gy. Regeneration rate of the AZCA resistant callus was much lower on the whole. Ninety and 120 Gy increased the regeneration rate for calli selected from 3 and 4 mM AZCA, respectively. Based on fresh weight, survival rate and regeneration for selection of the AZCA resistant cell line, 50-90 Gy was considered as the optimum range of gamma irradiation. Irradiated calli selected from AZCA were more tolerant to NaCl than those from non-irradiated calli. It suggests that elevated resistance to osmotic stress resulted from mutagenic treatment. The level of free proline content in the AZCA resistant cell line was increased up to 3.5 times compared with that in the control. Proline content in the regenerant derived from the AZCA resistant cell line also increased to 1.7 times that from the control plants regenerated from callus grown in AZCA free medium. Selection of proline overproducing cell lines by in vitro mutagenesis was successful and seems to be useful for improvement of stress tolerance in this crop.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.206-206
• /
• 2022

Sustainable agriculture is a potential strategy to enable agricultural cultivation systems to feed the growing population under climate change. Sustainable agriculture consists of environment-friendly farming methods that allow the production of crops with minimal harm to the ecosystem. Early establishment in rice might be helpful to adopt sustainable agriculture with less inputs, such as water and phosphorus fertilizer. Two QTLs conferring tolerance to abiotic stress and low nutrition condition, DTY4.1 and Pup1, respectively, are effective for good establishment in the early growth stage under low water and phosphorus fertilizer application. We developed 'Sechanmi' and 'MSI 1-DTY' harboring Pup1 and DTY4.1 into MS11, a japonica rice variety adaptable to tropical regions, using Marker-Assisted Backcrossing (MABC). MS 11-PD lines were developed to meet the demand for less water and P fertilizer application throughout the growth stage of rice. In the F5 generation, water-saving or rainfed cultivation was performed in different P (phosphorus) content. Irrigation was applied only when severe drought was observed one month after transplanting. There was no significant difference observed between the parents and MS11-PD lines in low P conditions. However, MS11-PD lines had more tillers in P-supplied conditions compared to that of the parents 40 and 50 days after transplanting. Under the same amount of P, MS11-PD lines might have higher phosphorus uptake capacity than the parents, increasing the number of tillers and showing better early establishment. The better vegetative growth stage is one of the factors that can potentially increase production by way of higher number of panicles. Through this breeding strategy, it is possible to attain sustainable agriculture by applying less P and water to address the need of a growing population.

• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.138-146
• /
• 2011

This study was carried out to select salt tolerant zoysiagrass breeding lines. Eighty two native zoysiagrasses collected from S. Korea were used in this study. Saline water were prepared by mixing sea water and tap water. ECw levels of saline water treated ranged from 2 to $3dS{\cdot}m^{-1}$. Zoysiagrass planted in pot by sprigging were soaked into the plastic box containing saline water. Winter injury was investigated under the pot condition. Most of Z. japonica types did not show winter injury. But Z. tenuifolia type, Z. matrella type, and Z. sinica type showed winter injury under the pot condition at Cheonan area. NaCl level in soil was increased from 0% to 0.51% by treatment of saline water. Soil ECe measurement showed upto $170dS{\cdot}m^{-1}$. Z. tenuifolia type (Z5034), Z. matrella type ('Konhee', Z4109, 'Semill'), Z. japonica type (Z1055, Z1040, Z1008, 'Zenith', 'Millock') and medium leaf type zoysiagrass (Z6096, Z6118, Z6021, Z6074) resulted in below 30% leaf firing under the saline condition. This approach might be useful for selecting salt tolerant breeding lines.

• The Plant Pathology Journal
• /
• v.25 no.4
• /
• pp.422-428
• /
• 2009

Studies were conducted to identify the sources of resistance in mungbean recombinant inbred lines (RILs) in Thailand against mungbean yellow mosaic disease (MYMD). 146 mungbean RILs in $F_8$ series were evaluated in a field including resistant parent NM-10-12-1 and susceptible parent KPS 2 during summer 2008 under high inoculum pressure. The RILs were subsequently scored for disease symptom severity ratings (DSSR) using a new scale. Observations regarding DSSR and % disease index (%DI) showed that the tested RILs responded differently to the disease. A large number of RILs (132) were found highly susceptible, 12 were susceptible, 3 were tolerant and one was resistant. Overall screening results showed that three RILs, viz. line no. 30, 100 and 101 had minimum DSSR and % disease index thus they are good source of resistance to MYMD in spite of high disease pressure and can therefore be used directly as varieties to manage the disease in Thailand.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.219-223
• /
• 2013

DNA markers can determine the genotype of many species. Single nucleotide polymorphism (SNP) detection is difficult without sequencing but it becomes easier with sdCAPS method. Here an experiment was performed for developing molecular markers using two SNPs, CSatpB-SNP and CSycf1-SNP, of chloroplast in cucumber plants. Properly designed primers with nucleotide sequences for restriction enzymes proved success of PCR and efficacy of digestion by the restriction enzymes. Then these markers were used to study the genotyping of cucumber breeding lines and cultivars obtained from various sources in respect of their chilling stress response. We confirmed that a U.S. cucumber line, 'NC76' known to possess a nuclear factor for the chilling tolerance showed the chloroplast genotypes related to chilling tolerance. However all Korean cucumber cultivars tested in this study showed the chloroplast genotypes related to chilling susceptibility. In conclusion, to develop chilling tolerant cucumber, both maternal and a nuclear factors related to chilling tolerance should be transferred from 'NC76' when 'NC76' is used as a female source and other elite lines as recurrent parents.