• Korean Journal of Microbiology
• /
• v.29 no.2
• /
• pp.136-142
• /
• 1991

The selection of ethanol-tolerant strains was applied to enrichment culture of YPD broth medium containing various concentrations of ethanol. Isolates were identified to be Saccharomyces cerevisiae, the others as S. dairensis, S. exiguus, S. telluris, Saccharomycodes ludwigii, Schwanniomyces occidentalis var. occidentalis and Zygosaccharomyces florentinus. Among isolates S. cerevisiae YO-1 was screened as having the highest ethanol tolerance and produced 18% (v/v) ethanol after 4 days fermentation. The change of fatty-acyl residues represents that a progressive decrease in fatty-acyl unsaturation and a proportional increase in saturation in phospholipids of yeast cells during fermentation affected the yeast viability. Supplementation ethanol to the cultures led to an increase of unsaturated fatty-acyl residues, especially $C_{16}$ or $C_{18}$ residues, along with a decrease in the proportion of saturated residues in cellular phospholipids. Increasing the amount of soy flour led to an increase in the maximum number of viable yeast cells and ethanol production. It was possible in 4 days to reach 21% (v/v) ethanol by adding 4% soy flour as source of unsaturated fatty-acyl residues to the fermentation medium. Soy flour not only increased yeast population but also enhanced the physiological properties of yeast cells to be ethanol tolerant in the anaerobic culture.

• Microbiology and Biotechnology Letters
• /
• v.17 no.3
• /
• pp.188-192
• /
• 1989

The promoters from akali-tolerant Bacillus sp. YA-14 chromosomal DMA cloned in B. subtilis using pPL703 were stably transferred to the donor strain. In alkali-tolerant Bacillus sp., the promoters revealed similiar properties with in B. subtilis but were preyed to be more efficient than in B. subtilis comparing with pPL708. Alkali-tolerant Bacillus sp. harboring the recombinant plasmid, p-l2Bl, was abnormally more inducible with chloramphenicol than B. subtilis haying the plasmid. Therefore the host-vector system using this recombinant plasmid and alkali-tolerant Bacillus sp. was expected to be more available.

• Journal of Plant Biotechnology
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2003

Doubled haploids have long been recognized as a valuable tool in plant breeding since it not only offers the quickest method of advancing heterozygous breeding lines to homozygosity, but also increased the selection efficiency over conventional procedures due to better discrimination between genotypes within any one generation. Salt tolerant mutants were obtained in rice the variety, 'Hawsungbyeo', through in vitro mutagenesis of in vitro cultured anther-derived calli. Various doses (30, 50, 70 and 90 Gy) of gamma ray were applied to investigate the effect of radiation on callus formation on medium containing 1% NaCl, green plant regeneration, frequency of selected doubled haploid mutants and of the salt tolerant screen. It was demonstrated that the dose of 30 and 50 Gy gamma rays had significant effects on callus formation, regeneration and selection of salt tolerance. No tolerant lines were obtained from non-mutagenized cultures. From gamma ray irradiated cultures, five tolerant lines ($M_2$generation) at germination stage and 13 tolerant lines ($M_3$genoration) at seedling stage were obtained. The frequency of salt tolerant mutants indicates that anther culture applied in connection with gamma rays is an effective way to improve salt tolerance.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.2 no.2
• /
• pp.111-117
• /
• 2001

Screening of fifteen bivoltine silkworm breeds of Bombyx mori Linn at a temperature of $31{\pm}1^{\circ}C$ and relative humidity of 85${\pm}$5% resulted in the identification of eight thermo-tolerant breeds. The survival and cocoon shell ratio of the tolerant breeds ranged from 72.7 to 78.7% and 20.0 to 20.1% respectively. The tolerant breeds comprised of four oval breeds and four dumb-bell breeds. Eight foundation crosses prepared by crossing the oval and dumb-bell parents among themselves were screened at a temperature of $31{\pm}1^{\circ}C$ and relative humidity of 85{\pm}5%. The performance of the foundation crosses on 11 economic characters were analysed by employing Multipie Trait Evaluation Index method. Four foundation crosses which scored average index value > 50 were selected as breeding parents and breeding initiated for the evolution of thermo-tolerant bivoltine silkworm breeds. The methodology and the results of the foundation crosses reared both at 31{\pm}1$^{\circ}C$ and at $25{\pm}1^{\circ}C$ temperatures, are discussed.

• The Korean Journal of Ecology
• /
• v.19 no.3
• /
• pp.201-207
• /
• 1996

Selection of Al tolerant woody plants, and possibility of reforestation with the Al tolerant plants in soil conditions with different Al content, topography and slope exposures were studied on the slopes around Yeocheon Industrial Complex. Root growth in length of plants grown in 1/2 Steinberg solution decreased with increased Al concentrations of the solution. Relative root length showed that Paulownia coreana, Celtis sinensis and Firmiana simplex were sensitive to $500\muM$ Al, Pinus koraiensis, Alnus japonica and Ligustrum japonicum were intermediate, and Pinus rigida, P. densiflora and P. thunbergii were tolerant to $1, 000\muM$ Al. Coniferous plants appeared to be more tolerant to Al than deciduous ones. Soil pH was 4.2 and Al content was 509 ppm in average around the Yeocheon industrial complex. Al content and soil acidity were more deteriorated on the foothill and slope facing to the pollution source from the industrial complex than on the ridge and opposite slope.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.131-145
• /
• 2015

The voltage-source inverters (VSI) supplying a motor drive are prone to open transistor faults. To address this issue in fault-tolerant drives applicable to electric vehicles, a new open transistor fault diagnosis (FD) method is presented in this paper. According to the proposed method, in order to define the FD index, the phase angle of the converter output current is estimated by a simple trigonometric function. The proposed FD method is adaptable, simple, capable of detecting multiple open switch faults and robust to load operational variations. Keeping the FD in mind as a mandatory part of the fault tolerant control algorithm, the FD block is applied to a five-phase converter supplying a multiphase fault-tolerant PM motor drive with non-sinusoidal unbalanced current waveforms. To investigate the performance of the FD technique, the fault-tolerant sliding mode control (SMC) of a five-phase brushless direct current (BLDC) motor is developed in this paper with the embedded FD block. Once the theory is explained, experimental waveforms are obtained from a five-phase BLDC motor to show the effectiveness of the proposed FD method. The FD algorithm is implemented on a field programmable gate array (FPGA).

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.257-264
• /
• 2004

Selection of stress-tolerant ginseng lines in fields is very difficult because it is almost impossible to control properly the environmental conditions of soil. On the contrary, it can be studied with ease to search for stress-tolerant ginseng lines through in vitro culture because of easy manipulation of stress conditions. This study was conducted for the selection of ginseng pure lines tolerant to salt stress. Murashige ＆amp; Skoog(MS) media with 2.5 folds of KNO$_3$, NH$_4$NO$_3$, MgSO$_4$.7$H_2O$, KH$_2$PO$_4$, and CaC1$_2$.2$H_2O$ was established for the selection of ginseng pure lines tolerant to salt stress in vitro. Among 88 ginseng pure lines bred by Korea Ginseng and Tobacco Research Institute, Punggi Hwangsuk, 78093, 82886, 78135, 86024 and KG104 lines was tolerant to salt stress. For the stable production of quality Korean ginseng, genetic tolerance to salt stress is one of important factors since relatively high salt concentrations in the ginseng nursery soil environment of Korea. Ginseng inbred pure lines were tested for their tolerance to salt stress through in vitro culture technique.

• Journal of Power Electronics
• /
• v.19 no.4
• /
• pp.989-999
• /
• 2019

This paper proposes a fault-tolerant control strategy with finite control set model predictive control (FCS-MPC) based on hierarchical optimization for five-level H-bridge neutral-point-clamped (5L-HNPC) inverter-fed induction motor drives. Fault-tolerant operation is analyzed, and the fault-tolerant control algorithm is improved. Adopting FCS-MPC based on hierarchical optimization, where the voltage is used as the controlled objective, called model predictive voltage control (MPVC), the postfault controller is simplified as a two layer control. The first layer is the voltage jump limit, and the second layer is the voltage following control, which adopts the optimal control strategy to ensure the current following performance and uniqueness of the optimal solution. Finally, simulation and experimental results verify that 5L-HNPC inverter-fed induction motor drives have strong fault tolerant capability and that the FCS-MPVC based on hierarchical optimization is feasible.

• Journal of Plant Biotechnology
• /
• v.29 no.4
• /
• pp.247-252
• /
• 2002

The combination of radiation technique with an in vitro culture system was initiated to develop salt tolerant rice. We established an in vitro culture system to select tolerant lines against salt stress. NaCl tolerant cell lines were selected from the callus irradiated with gamma ray on N$_{6}$ medium with 1.5% NaCl and 2 mg/L 2,4-D. Regenerants (M$_1$) were obtained from the tolerant callus which was cultured for 30 days auxin-free medium. The M$_2$seeds were harvested from M$_1$plants on an individual plant basis. Thirty seedlings from each 450 M$_2$lines were transplanted in a field and total 5,000 M$_3$lines were harvested with an average 90 percent of fertile grain. M$_3$lines were utilized for selection of salt tolerance. Salinity-tolerant lines (225) were selected among 5,000 M$_3$lines. Of the 225 lines tested, the morphological traits of two lines (120-10 and -11) were far superior to control (Donagjinbyeo) in agromomic traits such as plant height, root length and no. of roots. Control and tolerant lines were analyzed by RAPD markers. Three polymorphic bands were presented in only tolerant lines, demonstrating a genetic difference between control and the tolerant lines. Such tolerant lines could be used as genetic resources to improve salt tolerance.e.

• Journal of Life Science
• /
• v.25 no.12
• /
• pp.1458-1469
• /
• 2015

Many organic solvent-tolerant bacteria have been isolated from all environments such as soil, waste-water, even deep sea after first isolation report of organic solvent-tolerant bacterium. Most organic solvent- tolerant isolates have been determined to be Gram-negative bacteria, because Gram-negative bacteria have inherent tolerance property toward hostile organic solvents more than Gram-positive bacteria. The mechanisms of organic solvent tolerance have been elucidated extensively using mainly organic solvent-tolerant Gram-negative bacteria. The solvent-tolerance mechanisms in Gram-positive bacteria can be found in comparatively recent research. Organic solvents exhibited different toxicity depending on the solvent, and the tolerance levels of organic solvent-tolerant bacteria toward organic solvents were also highly changeable among species and strains. Therefore, organic solvent-tolerant bacteria could coped with solvent toxicity and adapted to solvent stress through the multifactorial and multigenic adaptative strategies. They could be survived even in the hyper concentrations of organic solvents by mechanisms which include: changes in cell morphology and cell behaviour, cell surface modifications, cell membrane adaptations, solvent excretion pumps, chaperones and anti-oxidative response. The aim of this work is to review the representative solvent tolerant bacteria and the adaptative and tolerance strategies toward organic solvents in organic solvent-tolerant bacteria, and their potential industrial and environmental impact.