• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.1-7
• /
• 2008

Fine grained superplastic Zn-22%Al alloy was extruded using a laser machined micro-die to produce a micro-gear shaft. Extrusion process was conducted under a constant pressure at constant temperatures ranging from 503 to 563K. Laser machining was capable to machine a micro-die with close tolerances and adequate surface quality. The extrusion rate increased with extrusion load under constant extrusion temperature. The rate reached a steady state and became constant after a certain period. There was a small instantaneous stroke on application of the load and then a very brief primary stage which preceded steady-state flow. The micro-extrusion process was proven to produce a micro-gear shaft successfully using a fine grained superplastic Zn-22%Al alloy.

• 대한조선학회논문집
• /
• 제44권4호
• /
• pp.425-438
• /
• 2007

In this paper, unsettled technical controversies concerning about fatigue strength analysis for FPSO, one of the representative floaters, associated with welding types, screening methods, fabrication tolerances, corrosion margins and Morison loads are described based on yard practices. Basic theory for stochastic fatigue analysis is introduced as detail as possible. In order to resolve large parts of the controversies, a new fully stochastic fatigue analysis program for FPSO is developed.

• 항공우주기술
• /
• 제10권2호
• /
• pp.128-132
• /
• 2011

KSLV-I 상단 추진기관 시스템인 킥모터 시스템에 대한 형상 공차 기준을 설정하기 위해서는 임무 수행을 위한 초기 제어성 분석 결과를 바탕으로 각 하위 서브시스템에 대한 형상 공차를 부여하는 것이 필요하다. 본 논문에서는 킥모터 시스템의 형상 공차 기준과 지상시험용 및 비행시험용 모델에 대해 시스템 차원에서 수행된 형상 관리 결과에 대해 다룬다.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.39-45
• /
• 2020

The express/intercity bus models have been developing for wheelchair users to provide the preferable long-distance travels by the Korean government research. In the previous studies, evaluation method was set up for the wheelchair users' safety and the study for wheelchair occupants' safety was performed under various crash loadings mimic to real accidents, frontal crash, side impact and rollover, etc. This study was focused on the evaluation of occupant behaviors and injuries (head and chest) during vehicle impact loading cases in order to ensure the safety of wheelchair passengers in the bus. The occupant response and belt loading data during the sled FE simulation were compared with those of the sled test. The simulation results showed overall safety tolerances of wheelchair occupants under the severe frontal deceleration, side impact loading based on the FMVSS 214 configuration and bus rollover loading.

• 한국컴퓨터정보학회논문지
• /
• 제3권4호
• /
• pp.97-102
• /
• 1998

본 논문에서는 영상을 효과적으로 부호화하고 높은 압축률에서도 원 영상을 잘 복원할 수 있는 프랙탈 압축방법을 제안하였다. 주어진 SNR 허용오차에 대해 Fisher l)방법과본 논문에서 제안한 방법이 모든 문턱치에서 압축비가 기존의 방법보다 더 높음을 보여준다. 이 지역적인 반복함수계가 PIFS 정보기억용량을 레인지 블록당 48비트에서 40비트로 줄일수 있어 압축시간이 개선됨을 보인다.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.37-46
• /
• 2003

This paper is to predict quality deterioration resulting from a caulking process of yoke which is a part of automotive steering system. The caluking is a plastic deformation process involving such as impact of high speed tool, contacts between part and fixtures and strain rate sensitivity of the part material. Elaborate application of finite element method is neccesary to calculate changes of part dimensions because they fall into a level of tolerances. Simple work hardening and strain rate sensitive model is proposed fur the material and applied for the simulation by using Abaqus which is able to cater for elastoplastic rate sensitive material and contacts. Numerical results of test models that represent tensile bar and tensile plate are compared with material data inputs. Dimensional changes for the yoke are calculated from simulations and compared to the mesurements and they show good agreement. The method presented here with the material model proved to be valuable to assess quality deterioration for similar metal forming processes.

• 미생물학회지
• /
• 제25권3호
• /
• pp.229-237
• /
• 1987

To determine the characteristics of heterotrophic bacterial community in estuarine ecosystem, water and sediment samples were taden from Naktong estuary. All isolates were compared with 73 characters and described by cluster analysis. With same characters, 30 reference strains were able to divide into approximate species level at 80% similarity (S value). Diversity indices ($H^{1}$) of sediment column isolates were higher than water column isolates. The bacterial community commonly appeared in water and sediment column was reduced with going to downstream. Tolerance indices for temperature (Pt) and salinity (Ps) were also higher in sediment isolates than in water isolates. The bacterial community in sediment column is believed to be composed with diverse populations compared to water column and maintains its stability against various environmental changes with high physiological tolerances.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.972-979
• /
• 1999

QFT(Quantitative Feedback Theory) is a very practical design technique that emphasizes the use of feedback for achieving the desired system performance tolerances in despite of plant uncertainty and disturbance. The fundamental concept of QFT is a loop shaping procedure that a suitable controller can be found by shaping a nominal loop transfer function. The loop shaping synthesis involves the identification of a structure and the specialization of parameter optimization of a desired system. This paper presents an improved loop shaping approach of QFT with model validation using GA(Genetic Algorithm). The method presented in this paper removes the problems of iterative operation, transformation error, and model validation in the conventional methods without consideration of frequency domain.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.750-752
• /
• 2003

This paper presents a method of tolerance analysis for a electric machine. Tolerance analysis technique is required to find the tolerance band of design variables and estimate the characteristic distribution of the electric machine, because that manufacturing tolerances as well as measuring errors have a great influence on the electric machine. Therefore, this paper introduces Stochastic Response Surface Methodology to achieve the tolerance analysis. As an example, the tolerance analysis is applied to the analysis of torque characteristics for a BLDC motor from the electric point of view.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.493-494
• /
• 2006

Chip breaker of cutting tool is an important feature to enhance cutting performance. Powder injection molding process was used to produce a triangular-shape cermet grooving insert which has three chip breakers. Attrition milled cermet powders were mixed with wax-based binder system in continuous twin screw extruder. Three-plate injection mold with slide cores was used to produce injection-molded parts. After molding, solvent and thermal debinding was carried out. Sintering was conducted in a batch furnace with a graphite heater. The sintered parts satisfy the requirements of dimensional tolerances and material properties.