• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.78-89
• /
• 1996

Every mechanical component is fabricated with the variations in its size and shape, and the allowable range of the variation is specified by the tolerance in the design stage. Geometric tolerances specify the size or the thickness of each shape entity itself or its relative position and orientation with respect to datums. Since the range of shape variation can be represented by the variation of the coordinate system attached to the shape, the transformation matrix of the coordinate system would mathematically express the range of shape variation if the interval numbers are inserted for the elements of the transformation matrix. For the shape entity specified by the geometric tolerance with reference to datums, its range of variation can be also derived by propagating the transformation matrices composed of interval numbers. The propagation depends upon the order of precedence of datums.

• 한국대기환경학회지
• /
• 제7권3호
• /
• pp.219-226
• /
• 1991

Results from study on physiological responses to $SO_2$ of Quercus spp. selected for restoration of vegetation damaged by air pollution in the field study were as follows. Tolerance of Quercus aliena, Q. acutissima and Q. mongolica used in this study to $SO_2$ was higher in that order and tolerance of these plants to $SO_2$ was high comparatively among trees composing of major forest vegetation of Korea including natural forests and plantations. Stomatal resistance of these plants was increased after exposure to $SO_2$ and range of increase was different among species. From discrepancy between order of tolerance to $SO_2$ and range of increase in stomatal resistance, we were estimated that resistance mechanisms of Quercus spp. were different among species as mechanism originated in avoidance and resistance, respectively. Water potential of plant leaves reduced after exposure to $SO_2$, degree of reduction accorded with order of tolerance to $SO_2$. Reduction of water potential of plants after exposure to $SO_2$ was initiated before appearance of visible damage in plant leaves and water potential of plants exposed to $SO_2$ of low concentration, in which plants were not showed viaible damage was also reduced.

• 생태와환경
• /
• 제43권4호
• /
• pp.459-470
• /
• 2010

In this study, we analyzed fish tolerance guilds in mainstems and tributaries of 65 streams and rivers arid their relations to water quality using dataset sampled from April to November, 2009. For the study, water quality parameters including biochemical oxygen demand (BOD), electric conductivity (EC), total nitrogen (TN), total phosphorus (TP), ammonia nitrogen ($NH_3$-N), nitrate nitrogen ($NO_3$-N) and phosphate phosphorus ($PO_4$-P) were analyzed in the laboratory and also tolerance ranges in 3 category fishes of sensitive, intermediate, and tolerant species with high abundance were analyzed. According to fish guild analysis, tolerant species was 58% of the total community and the proportion of omnivore species was 63% of the total, indicating a degradation of habitats and water quality. Water quality was shown typical longitudinal gradients from the headwater to the down-river; TN and TP increased toward the down-rivers except for the big point-source area and ionic contents, based on, electric conductivity showed same pattern. Tolerance guild analysis of 9 major species with high abundance indicated that sensitive groups had narrower tolerance range in the water quality than the groups of intermediate and tolerant species. In contrast, tolerant groups including Zacco platypus, Carassius auratus, and Opsarichthys uncirostris amurensis had wider tolerance ranges than the groups of sensitive and intermediate species. Thus, each group was evidently segregated from the tolerance levels. Principal Component Analysis (PCA) employed for the relations of water quality to fish species in each groups suggests that water quality had highest eigenvalues with fish species in the 1st axis of the PCA and nitrogen (TN, $NH_3$-N, $NO_3$-N) and phosphorus (TP) were key components differentiating three groups of sensitive, intermediate and tolerance guilds.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.197-200
• /
• 2002

UVR-induced immunosuppression contributes to skin cancer. The aim was to construct accurate dose response curves for primary and secondary contact sensitivity for solar-simulated UVR (ssUVR; 290-400nm), UVA and UVB as the role of UVA in immunosuppression is controversial. We used a xenon arc source. The mice were immobilised, enabling accurate dosing. C57BL/6 mice were immunosuppressed at half the dose of ssUVR required to cause sunburn but not by higher doses (up to the sunburn dose). Thus, ssUVR causes systemic immunosuppression only over a narrow, low dose range. UVA caused suppression at low but not high doses whereas UVB induced immunosuppression at all doses tested. 8 weeks later the mice were resensitised to assess tolerance. Mice exposed to the minimum immunosuppressive dose of ssUVR prior to primary sensitisation were tolerant to re-sensitisation. However, at higher doses of ssUVR, these mice were protected from tolerance. Interestingly, while low doses of UV A caused immunosuppression, even lower doses enhanced the response to the second sensitisation. Higher doses of UVA had no affect. UVB induced tolerance in a dose related manner. Thus, ssUVR only induces immunosuppression and tolerance over a narrow dose range. Both UVA and UVB are immunosuppressive at this dose, while higher doses of UVA protect from the suppressive effects of UVB. Surprisingly very low doses of UVA enhanced memory development. Thus UVR has complex effects on the immune system depending on dose and spectrum.

• International Journal of Safety
• /
• 제6권1호
• /
• pp.1-6
• /
• 2007

Operation of human-centered robot, in general, facilitates the creation of new process that may potentially harm the human operators. Design of safety-guaranteed operation of human-centered robots is, therefore, important since it determines the ultimate outcomes of operations involving safety of human operators. This study discusses the application of geometric tolerance and head injury criteria to safety assessment of human-centered robotic operations. Examples show that extending "Work Area" has more significant effect on the uncertainty in safety than extending the system range in the presence of velocity control.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.75-83
• /
• 2010

Every mechanical part for mass production has dimensions with tolerances in engineering drawing. Tolerance is given to guarantee assemble parts together satisfying functional requirements and dimensional constraints. Tolerance is essential factor for standardization of parts or assembly and has huge influence on manufacturing cost. It will be desirable to have tolerances as broad as possible for minimizing manufacturing cost. This paper describes tolerance analysis of u-joint assembly that is a part of automobile steering system. Within the range of tolerances of parts, accumulated effect is estimated by arithmetic calculation, probability theory and Monte carlo simulation. Each result is compared to investigate the method for increasing productivity.

• 한국지역사회생활과학회지
• /
• 제17권2호
• /
• pp.49-60
• /
• 2006

It was measured the energy expenditure in each season, the cold tolerance in winter and the heat tolerance in summer. Farmers' adaptability to the change of environment was compared with those of city-dwellers such as indoor workers and street cleaners to determine the effect of living environment, especially living temperature, on the health of human body. It turned out that farmers had experienced wide range of temperature that was higher in summer and lower in winter than indoor workers. Farmers and street cleaners showed seasonal adaptation in energy expenditure, which was high in winter and low in summer. However, indoor workers did not show seasonal changes. Energy expenditure had an inverse correlation with the temperature in work place where subjects spend the longer time in a day except in female indoor workers in Seoul. And It was proved that farmers and street cleaners had stronger cold tolerance and heat tolerance than indoor workers.

• 정보과학회 논문지
• /
• 제42권2호
• /
• pp.242-254
• /
• 2015

본 논문에서는 다차원 인덱스 기반 다단계 k-NN 검색의 성능 향상 문제를 다룬다. 기존 다단계 k-NN 검색에서는 고차원 객체의 저차원 변환으로 인한 정보 손실로 k-NN 질의 결과 매우 큰 허용치(검색 범위)가 결정되어 범위 질의 결과로 많은 후보가 검색된다. 또한, 많은 후보는 후처리 과정에서 매우 많은 I/O 및 CPU 오버헤드를 발생시킨다. 본 논문에서는 이와 같은 고찰에 기반하여 범위 질의의 허용치를 줄여 후보 개수를 줄이고 이를 통해 성능을 향상시키는 방법을 제안한다. 먼저, k-NN 질의 결과로 결정된 허용치를 고차원 및 저차원 객체간 거리 비율로 강제 축소하여 범위 질의에 사용하는 허용치 축소 (근사적) 해결책을 제안한다. 다음으로, k-NN 질의 계수 k 대신 c k 를 사용하여 얻은 보다 타이트(tight)한 허용치로 범위 질의를 수행하는 계수 제어 (정확한) 해결책을 제안한다. 실제 객체 데이터를 사용하여 실험한 결과, 제안한 두 가지 해결책은 기존 다단계 k-NN 검색에 비해 후보 개수와 검색 시간 모두를 크게 향상시킨 것으로 나타났다.

• 공업화학
• /
• 제21권4호
• /
• pp.411-416
• /
• 2010

본 연구에서는 알칼리 현상형 감광성 수지재료와 전도성 카본블랙을 이용하여 만들어진 감광성 폴리머 저항 페이스트를 이용하여 후막저항체의 허용편차(tolerance)를 개선하고자 하였다. 먼저 카본블랙과 감광성 수지의 선택이 폴리머 후막저항(polymer thick film resistor, PTFR)의 저항값의 범위와 허용편차의 수준에 미치는 영향을 조사하였다. 이후 테스트 기판상에 감광성 저항 페이스트를 도포하는 방법에 따른 저항값 허용편차의 차이를 평가하였다. 감광성 저항 페이스트를 스크린 인쇄를 이용하여 테스트 기판의 전면에 도포한 경우에는 테스트 기판상에서 균일한 두께의 후막을 형성하기 어렵기 때문에 위치에 따른 저항값의 허용편차가 크게 나타났다. 반면, 롤러를 이용하여 페이스트를 도포하였을 때, 전체 기판 면적에 균일한 두께의 저항체 후막을 형성할 수 있었으며, 저항값 평가 결과 ${\pm}10%$ 이내의 낮은 허용편차를 나타내었다. 포토공정을 이용한 정밀한 패터닝 공정과 롤러를 이용한 균일한 두께의 저항막 도포 공정을 결합함으로써 후막저항의 허용편차를 개선할 수 있었다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1619-1626
• /
• 2018

The output power of most facilities for renewable energy generation is unstable due to external environmental conditions. In distributed power systems with two or more sources, a stable output can be achieved with the complementary power supply among the different input sources. In this paper, a double-input DC-DC converter with a wide-input-voltage-range is proposed for renewable energy generation. This converter has the following advantages: the circuit is simple, and the input voltage range is wide and the fault tolerance is excellent. The operation modes and the steady-state analysis are examined. Finally, experimental results are illustrated to verify the correctness of the analysis and the feasibility of the proposed converter.