• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.235-239
• /
• 2016

This study is performed to fabricate a Ti porous body by freeze drying process using titanium hydride ($TiH_2$) powder and camphene. Then, the Ti porous body is employed to synthesize carbon nanotubes (CNTs) using thermal catalytic chemical vapor deposition (CCVD) with Fe catalyst and methane ($CH_4$) gas to increase the specific surface area. The synthesized Ti porous body has $100{\mu}M$-sized macropores and $10-30{\mu}m$-sized micropores. The synthesized CNTs have random directions and are entangled with adjacent CNTs. The CNTs have a bamboo-like structure, and their average diameter is about 50 nm. The Fe nano-particles observed at the tip of the CNTs indicate that the tip growth model is applicable. The specific surface area of the CNT-coated Ti porous body is about 20 times larger than that of the raw Ti porous body. These CNT-coated Ti porous bodies are expected to be used as filters or catalyst supports.

• 대한치과기공학회지
• /
• 제15권1호
• /
• pp.5-25
• /
• 1993

Effects of hydrogenation on microstructure and mechanical properties of pure Ti and Ti-0.15Pd alloy have been studied by means of optical microscopy, differential scanning calorimeter(DSC), Xray diffraction and micro vicker's hardness test. Grain size of pure Ti and Ti-0.15Pd alloy decresed largely by hydrogenation finer than that of pure Ti and the grain size refinement was evedent in Ti-0.15Pd alloy than that in pure Ti. Ti-.015Pd alloy carried out solution treatment at 950$^{\circ}C$, the transformation of $\alpha$' martensite was occured. The amount of Hydrogen absorption in Ti-.015Pd alloy was higher than that in pure Ti. Decomposition of hydride in pure titanium and Ti-0.15Pd alloy increased largely by hydrogenation, and micro vicker's hardness of Ti-.015Pd alloy was largely than that of pure Ti by 30% after hydrogenation. The micro vicker's hardness of Ti-0.15Pd alloy after solution treatment and dehydrogenation were higher at $\beta$ phase ranger(950$^{\circ}C$) than that phase range(750$^{\circ}C$).

• 한국주조공학회지
• /
• 제31권3호
• /
• pp.145-151
• /
• 2011

Metallic foam has been known as a functional material which can be used for absorption properties of energy and sound. The unique characteristics of Al foam of mechanical, acoustic, thermal properties depend on density, cell size distribution and cell size, and these characteristics expected to apply industry field. Al-Zn-Mg-Cu alloy foams was fabricated by following process; firstly melting the Al alloy, thickening process of addition of Ca granule to increased of viscosity, foaming process of addition of titanium hydride powder to make the pores, holding in the furnace to form of cooling down to the room temperature. Metal foams with various porosity level were manufactured by change the foaming temperature. Compressive strength of the Al alloy foams was 2 times higher at 88% porosity and 1.2 times higher at 92% porosity than pure Al foams. It's sound and vibration absorption coefficient were higher than pure Al foams and with increasing porosity.

• 한국분말재료학회지
• /
• 제20권3호
• /
• pp.221-227
• /
• 2013

$TiB_2$-reinforced iron matrix composite (Fe-$TiB_2$) powder was in-situ fabricated from titanium hydride ($TiH_2$) and iron boride (FeB) powders by the mechanical activation and a subsequent reaction. Phase formation of the composite powder was identified by X-ray diffraction (XRD). The morphology and phase composition were observed and measured by field emission-scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. The results showed that $TiB_2$ particles formed in nanoscale were uniformly distributed in Fe matrix. $Fe_2B$ phase existed due to an incomplete reaction of Ti and FeB. Effect of milling process and synthesis temperature on the formation of composite were discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.451-455
• /
• 2017

ZPP와 THPP 화약의 압력 카트리지가 밀폐용기에 장착되어 연소될 때의 현상을 반응성 오일러리안-라그랑지안 이상 유동 해석 코드를 통해 모사 하였다. ZPP와 THPP는 압력 카트리지 내에서 boron nitride 판으로 격리되어있고, ZPP만 열선에 의해 직접 점화되기 때문에 THPP의 연소지연효과가 발생할 가능성이 높다. 실험을 통한 THPP의 점화지연 측정은 힘들기 때문에 기존의 연구를 통해 검증된 수치해석 코드를 통해 점화지연에 대한 케이스 스터디를 수행하고 현상학적 분석을 수행하였다. 해석 결과 THPP의 점화지연 정도에 따라 초기 충격파의 강도가 변하여 압력선도의 초기 피크특성 뿐만 아니라 주파수에도 영향을 미친다는 것을 알 수 있었다.

• 한국재료학회지
• /
• 제10권7호
• /
• pp.464-470
• /
• 2000

스폰지 티타늄으로부터 수산호-탈수소화법(HDH)법으로 제조된 부말에 고상탈산법(DOSS)을 적용시켜 만든 산소 농도 범위 1980~8450 ppm, 입경 $25\mu\textrm{m}$ 내외의 불규칙 티타늄 분말의 성형 및 소결성을 조사하였다. 250MPa의 가압력으로 냉간압축성형한 결과, 성형밀도는 69.0%~62.3% 범위 내에 있었고 산호함량 증가에 따라 직선 또는 완만하게 감소하였다. 이러한 경향은 티타늄 분말의 경도변화로 설명할 수 있었다. 최고 7%까지의 차이를 보였던 성형밀도에도 불구하고 $1100^{\circ}C$에서 2시간동안 소결한 결과, 산소함량에 무관하게 소결밀도는 90.5$\pm$0.5%를 보였으며, 결정립의 크기는$60\mu\textrm{m}$ 내외의 균일하였고, 가공크기 및 분포도 유사하였다. 소결체의 경도에 미치는 산소의 영향은 실험범위 내에서 VHN(sintered)=135.5+64.3$\times$(wt%$O_2$)의 실험식을 얻었다. 소결체의 파단면 관찰한 결과, 연성에서 취성파괴로의 천이는 소결체에의 산소함량이 2987~5582ppm 사이에서 일어나는 것으로 나타났다.