• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.105.2-105.2
• /
• 2012

타이타늄합금기지 복합재료(Ti-MMC)는 일반 철합금 혹은 철합금기지 복합재료에 비하여 내식성과 내마모성, 내열성, 강도 등이 우수하여, 고성능 가솔린자동차 부품 외에도 하이브리드 자동차 엔진 부품, 고온 압축기 및 터빈 휠 등 고온에서 사용되는 고속 회전품으로 응용가능성이 매우 크다. 그러나 아직까지도 타이타늄 원소재 가격이 높고 제조 공정의 어려움으로 인하여 실용화에 장애가 되고 있다. 이를 극복하기 위하여 최근에는 타이타늄기지 복합재료의 제조단가를 낮추는 동시에 기계적 성질을 개선하기 위한 다양한 연구들이 진행되고 있다. 본 연구에서는 고가의 HDH(Hydride-Dehydride) 공정에 의하여 제조된 타이타늄 분말 대신에 저가의 titanium hydride를 사용하여 반응생성 공정으로 제조단가가 낮은 복합재료를 제조하고자 하였다. 당 연구실에서 저비용합금으로 개발된 Ti-Al-Fe 계 타이타늄합금을 기지로 한 TiB 강화 복합재료를 제조하기 위하여 반응분말로 $TiB_2$를 사용하여 제조하였다. 강화상 분율에 따른 밀도변화와 제조 공정변수에 따른 소결특성과 기계적 특성 변화에 대하여 조사하였다.

• Archives of Pharmacal Research
• /
• v.17 no.3
• /
• pp.190-193
• /
• 1994

Friedel-Crafts reaction isopropoxybenzene with methyl $\alpha$-chloro-$\alpha$-(maethylthio)acetate 1 afforded methyl $\alpha$-methylthio-p-isopropoxyphenylacetate 2d, which was readily converted into methyl p-isopropoxyphenylacetate 3 by reductive desulfurization with zinc dust in acetic acid. Methylation of 3 with sodium hydride and methyl iodide gave methyl $\alpha$-(p-isopropoxyphenyl)propionate 5. Methyl p-hydroxyphenylakanoates (4,6), useful intermediates for some medicines, were easily prepared by treatment of 3 and 5 with titanium tetrachloride, respectively.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.282-286
• /
• 2016

A sintered body of $TiB_2$-reinforced iron matrix composite ($Fe-TiB_2$) is fabricated by pressureless-sintering of a mixture of titanium hydride ($TiH_2$) and iron boride (FeB) powders. The powder mixture is prepared in a planetary ball-mill at 700 rpm for 3 h and then pressurelessly sintered at 1300, 1350 and $1400^{\circ}C$ for 0-2 h. The optimal sintering temperature for high densities (above 95% relative density) is between 1350 and $1400^{\circ}C$, where the holding time can be varied from 0.25 to 2 h. A maximum relative density of 96.0% is obtained from the ($FeB+TiH_2$) powder compacts sintered at $1400^{\circ}C$ for 2 h. Sintered compacts have two main phases of Fe and $TiB_2$ along with traces of TiB, which seems to be formed through the reaction of TiB2 formed at lower temperatures during the heating stage with the excess Ti that is intentionally added to complete the reaction for $TiB_2$ formation. Nearly fully densified sintered compacts show a homogeneous microstructure composed of fine $TiB_2$ particulates with submicron sizes and an Fe-matrix. A maximum hardness of 71.2 HRC is obtained from the specimen sintered at $1400^{\circ}C$ for 0.5 h, which is nearly equivalent to the HRC of conventional WC-Co hardmetals containing 20 wt% Co.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.58-63
• /
• 2020

THPP is a type of metallic complex explosive used in initiators, consisting of TiH₂ and KClO₄. In this case KClO₄ includes ClO₄^- which is a harmful substance that may cause thyroid dysfunction or tumors. In this study KIO₄ is applied to a new type of environmentally friendly explosive as a substitute to the conventional KClO₄. Tests were carried out to see if KIO₄ can be made a successful replacement for KClO₄.

• Transactions of Materials Processing
• /
• v.28 no.1
• /
• pp.21-26
• /
• 2019

Direct Laser Melting (DLM) of $Ti-xTiH_2$ (mixing ratio x = 2, 5, 10 wt.%) blended powder is characterized by producing porous titanium parts. When a high energy laser is irradiated on a $Ti-TiH_2$ blended powder, hydrogen gas ($H_2$) is produced by the accompanying decomposition of the $TiH_2$ powder, and acts as a pore-forming and activator. The hydrogen gas trapped in a rapidly solidified molten pool, which generates porosity in the deposited layer. In this study, the effects of a $TiH_2$ mixing ratio and the associated processing parameters on the development of a porous titanium were investigated. It was determined that as the content of $TiH_2$ increases, the resulting porosity density also increases, due to the increase of $H_2$ produced by $TiH_2$. Also, porosity increases as the scan speed increases. As fast solidified melting pools do not provide enough time for $H_2$ to escape, the faster the scan speed, the more the resulting $H_2$ is captured by the process. The results of this study show that the mixing ratio (x) and laser machining parameters can be adjusted to actively generate and control the porosity of the DLM parts.

• Transactions of the Korean hydrogen and new energy society
• /
• v.7 no.1
• /
• pp.39-44
• /
• 1996

The discharge capacity of V-Ti-Ni(V-rich) metal hydride electrode during the charge-discharge cycling was investigated in KOH electrolyte. All electrodes were degraded within 25 cycles. To investigate the cause of the degradation phenomena impedance measurements were performed by using E.I.S(electrochemical impedance spectroscopy). The surfaces of the degraded electrodes were examined by Auger electron spectroscopy (AES). It was observed that all electrodes were covered with oxygen from the surface to the bulk, titanium was enriched near surface, and vanadium was dissolved from the surface to the bulk.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.91.2-91.2
• /
• 2012

The TiB2-reinforced iron matrix nanocomposite (Fe-TiB2) was in-situ fabricated from titanium hydride (TiH2) and iron boride (FeB) powders by a simple and cost-effective process that combines the mechanical activation (MA) and a subsequent heat treatment (HT). Effect of milling factors and synthesized temperatures on the formation of the nanocomposite were presented and discussed. A differential thermal analyser (DSC-TG) was employed for examination of thermal behavior of MAed powders. Phases of the nanocomposite were confirmed by X-ray diffraction analysis (XRD). The morphologies and microstructure of nanocomposite were investigated by field emission-scanning electron microscopy (FE-SEM) and energy-dispersive X-ray spectroscopy (EDS). Phase composition and distribution were analyzed by electron probe X-ray microanalysis (EPMA). Results showed that TiB2 particles formed in nanoscale were uniformly distributed in alloyed Fe matrix.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.759-760
• /
• 2006

Ti-6Al-4V has low specific gravity, high corrosion resistance and superior mechanical properties but it is very difficult to control oxygen content in MIM process. It is necessary to use powders with coarse particle size to decrease oxygen content of powders, so feedstocks with poor fluidity and sintered bodies with lower density are obtained in such cases. Fine titanium hydride-dehydride powders were blended with atomized powders to accomplish higher fluidity and sintered density. Sintered bodies had higher sintered density and mechanical properties equivalent to those of wrought materials by controlling oxygen content less than 0.35mass%.

• Transactions of Materials Processing
• /
• v.12 no.5
• /
• pp.457-464
• /
• 2003

In the powder compact melting technique, proper precursor fabrication is very important because density distribution after foaming and foamability are determined during precursor fabrication process. The fabrication of the precursor has to be performed very carefully because any residual porosity or other defects will lead to poor results in further processing. In order to evaluate the effect of the compaction parameters on the kinetics of the foaming process, a series of experiments were performed. In this study, aluminium foams with a closed cell structure were fabricated by using both the powder compact method and the induction heating process. A proper induction coil was designed to obtain a uniform temperature distribution over the entire cross sectional area of precursor. To establish the foamable precursor fabrication conditions, effects of process parameters such as the titanium hydride content (0.3∼1.5 wt.%), pressing pressure of the foamable precursor (50∼150kN) on the pore morphology were investigated.

• Korean Journal of Dental Materials
• /
• v.45 no.4
• /
• pp.257-274
• /
• 2018

The purpose of this study was to evaluate the effect of acid-treatment conditions on the surface properties of the RBM (Resorbable Blast Media) treated titanium. Disk typed cp-titanium specimens were prepared and RBM treatments was performed with calcium phosphate ceramic powder. Acid solution was mixed using HCl, $H_2SO_4$ and deionized water with 4 different volume fraction. The RBM treated titanium was acid treated with different acid solutions at 3 different temperatures and for 3 different periods. After acid-treatments, samples were cleaned with 1 % Solujet solution for 30 min and deionized water for 30 min using ultrasonic cleanser, then dried in the electrical oven ($37^{\circ}C$). Weight of samples before and after acid-treatment were measured using electric balance. Surface roughness was estimated using a confocal laser scanning microscopy, crystal phase in the surface of sample was analyzed using X-ray diffractometer. Surface morphology and components were evaluated using Scanning Electron Microscope (SEM) with Energy Dispersive X-ray spectroscopy (EDX) and X-ray Photoemission Spectroscopy (XPS). Values of the weight changes and surface roughness were statistically analyzed using Tukey-multiple comparison test (p=0.05). Weight change after acid treatments were significantly increased with increasing the concentration of $H_2SO_4$ and temperature of acid-solution. Acid-treatment conditions (concentration of $H_2SO_4$, temperature and time) did not produce consistent effects on the surface roughness, it showed the scattered results. From XRD analysis, formation of titanium hydrides in the titanium surface were observed in all specimens treated with acid-solutions. From XPS analysis, thin titanium oxide layer in the acid-treated specimens could be evaluated. Acid solution with $90^{\circ}C$ showed the strong effect on the titanium surface, it should be treated with caution to avoid the over-etching process.