• Membrane Journal
• /
• v.25 no.1
• /
• pp.48-59
• /
• 2015

This paper reports a fabrication of poly(L-lactic acid) (PLLA) scaffold membranes through phase separation process using pure and mixed solvents. Chloroform and 1,4-dioxane were used as pure solvents and mixed solvents were obtained by mixing the pure solvents together. Morphologies, mechanical properties and mass transfer characteristics of the scaffold membranes were investigated through SEM, stress-strain test and glucose diffusion test. Scaffold membranes from the solution with pure chloroform showed solid-wall pore structure. In contrast, nano-fibrous membranes were fabricated from the solution with pure 1,4-dioxane. In case of mixed solvents, the scaffold membranes showed various structures with changing composition of the solvents. When 1,4-dioxane content was lower than 20 wt% in the solvent, scaffold membrane showed solid-wall pore structure. When the content was 20 wt%, scaffold membranes with macropores with the maximum size of $100{\mu}m$ was obtained. In the concentration range of 1,4-dioxane over 25 wt%, the scaffold membranes showed nano-fibrous structures. In this range, the fibers showed different diameters with changing composition of the solvent. The minimum fiber diameter was about $15{\mu}m$, when 1,4-dioxane composition was 80 wt%. These results indicate that the composition of the solvent showed a significant effect on the structure of scaffold membrane.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.253-268
• /
• 2012

Full-mouth reconstruction of a patient using dental implants is a challenge if there is vertical and horizontal bone resorption, since this includes the gingival area and restricts the position of the implants. however, hard- and soft-tissue grafting may allow the implants to be placed into the desired position. Although it is possible to regenerate lost tissues, an alternative is to use fixed detachable prostheses that restore the function and the esthetics of the gingiva and teeth. Various material combinations including metal/acrylic, metal/ceramic, and zirconia/ceramic have been used for constructing this type of restoration. Other problems include wear, separation or fracture of the resin teeth from the metal/acrylic prosthesis, chipping or fracture of porcelain from the metal/ceramic or zirconia/ceramic prosthesis, and fracture of the framework in some free-end prostheses. With virtually unbreakable, chip-proof, life-like nature, monolithic zirconia frameworks can prospectively replace other framework materials. This clinical report describes the restoration of a patient with complete fixed detachable maxillary and mandibular prostheses made of monolithic zirconia with dental implants. The occluding surfaces were made of monolithic zirconia, to decrease the risk of chipping or fracture. The prostheses were esthetically pleasing, and no clinical complications have been reported after two years.

• Journal of Periodontal and Implant Science
• /
• v.31 no.1
• /
• pp.149-165
• /
• 2001

This study was performed to define the cytotoxicity and the anti-inflammatory action of Pulsatilla koreana extracts. To analyze cytotoxic effects, gingival and periodontal ligament fibroblasts were used, and anti-inflammatory actions related to reduction of $IL-1{\beta}$ and $PGE_2$ production were performed in vitro, for the suggestion of efficacy and safety on periodontal therapeutic use of Pulsatilla koreana extracts. We extracted ethylacetate and butylalcohol from well-dried and ground Pulsatilla koreana throughout multiple processing, then used different concentration solution(0.1 %, 0.2 %, 0.4 %, 0.01 %, 0.02 %, 0.04 %, 1 %, 2 %) of ethylacetate and butylalcohol extracts to examine eytotoxic effects and anti-inflammatory actions Cytotoxic effects were examined by ELISA reader using MTT(Methyl Thiazol-2-YL-2, 5-diphenyl Tetrazolium bromide)solution following culture of human gingival and periodontal ligament fibroblasts. Synthesis of $IL-1{\beta}$was examined by $IL-1{\beta}$ enzyme-immunoassay(EIA)system after separation and culture of monocyte, and $PGE_2$ was examined by $PGE_2EIA$ system after culture of gingival fibroblasts. The results were as follows: 1. In the MTT test of gingival fibroblasts, the change of optical density was decreased significantly at 2 % of butylalcohol extracts and 0.04 %, 0.1 %, 0.2 %, 0.4 %, 1 %, 2 % of ethylacetate extracts.(p<0.05) 2. In the MTT test of periodontal ligament cells, the change of optical density were not differ significantly. but butylalcohol and ethylacetate extracts except from butylalcohol 0.01 % showed high cell cytotoxity. 3. Both ethylacetate and butylalcohol extracts from Pulsatilla koreana inhibited the synthesis of $IL-1{\beta}$and inhibition effect of ethylacetate extracts were higher than butylalcohol extracts. 4. Both ethylacetate and butylalcohol extracts from Pulsatilla koreana inhibited the synthesis of $PGE_2$, and ethylacetate extracts were higher than butylalcohol extracts. In conclusion, ethylacetate and butylalcohol extracts from Pulsatilla koreana showed little cell cytotoxity for gingival and periodontal ligament fibroblasts, and the inhibition of $IL-1{\beta}$ and $PGE_2$ sysnthesis, therefore it is considered that these extracts can be developed as the therapeutics of the periodontal disease.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.288-296
• /
• 2007

Distraction osteogenesis(DO) is a technique of lengthning bone including soft tissue by gradual separation of surgically divided bone surfaces. Distraction osteogenesis combination with a compression stimulation(DO-CO) was a new technique by authors to enhance new bone quality and to shorten the consolidation period. The purpose of this study was to compare DO with DO combined with compression force in efficiency by evaluating the expression of TGF-${\beta}1$, osteonectin and BMP-4 on bone regenerate in rabbit mandible. Fourty two rabbits were used for this experiment. On the control group, the distraction was carried out at the rate of 1 mm per day to obtain the amount of 8 mm distraction for 8 days. On the experimental group, the distraction was carried out at the rate of 1 mm per day for 10 days, 3 days-latency period, and then the compression was carried out as counter direction 1 mm per day for 2 days. After 0 day, 5 days, 13 days, 20 days, 27 days, 34 days and 41 days, three rabbits on each group were sacrificed and the distracted portion of mandible were cut and treated for RT-PCR observation. The level of expression of TGF-${\beta}1$ and osteonectin were shown more and longer expression in the experimental group than in the control group. The expression of BMP-4 was maintained with high level during the entire experimental period in both groups. These findings suggested that DO with compression stimulation could be a favorable technique for obtaining a good new bone quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.30-42
• /
• 1986

In order to find out the best media, explants and environmental conditions for induction of calluses and organogeneses of Pinellia ternata (Thunb.) Breit in vitro, various parts of adult have been cultured on Murashige & Skoog's medium containing various levels of 2,4-dichlorophenoxy acetic acid(2,4-D) and kinetin. The results obtained were as follows: Calluses were induced from the surface of apical meristem and leaf tissue. Formation and growth of calluses in petiole ex plants were best on the MS medium complemented with 2,4-D 2.0 mg/l and kinetin 0.2mg/l. But callus formation in stem ex plants of the nearest tuber was not induced at all kinds of media. Plantlets occured at all treatment except absence of growth regulator. Their numbers, size, leaf and fresh weight were promoted by 2,4-D 2.0mg/l and kinetin 0.2mg/l. Root growth was increased on the medium containing higher 2,4-D concentrations. Size and fresh weight of callus were increased at 25$^{\circ}C$ compared with 10, 20 and 30$^{\circ}C$, respectively. Optimal pH value was at 6.0 for growth of callus. Morphological aberrations were observed in plantlets, especially in regenerated leaves. The separation of the broad leaved plantlets and albino were observed in some cultures. Growth of plantlets after transplantation was best in pots with the sterilized vermiculte. But abnormal variants withered up.

• Journal of Periodontal and Implant Science
• /
• v.47 no.6
• /
• pp.352-362
• /
• 2017

Purpose: Furcation involvement in the molars is difficult to treat, and has been recognized as a risk factor for tooth loss. Although periodontal regenerative therapies, including guided tissue regeneration and various types of bone grafts, have been applied to furcation defects, the effects of these treatments are limited, especially in large class III furcation defects. The purpose of this pilot study was to investigate the effect of reciprocal autologous root transplantation on periodontal wound healing and regeneration in class III furcation defects in dogs. Methods: Furcation defects (7 mm wide and 6 mm high) were surgically created after root separation of the unilateral third and fourth premolars in 4 dogs. Eight furcation defects were randomized to receive either reciprocal autologous root transplantation (test) or no further treatment (control). In the test group, the mesial and distal roots were transplanted into the distal and mesial extraction sockets, respectively. The animals were sacrificed 10 weeks after surgery for histologic evaluation. Results: The healing pattern in the control group was characterized by extensive collapse of the flap and limited periodontal regeneration. New bone formation in the test group ($3.56{\pm}0.57mm$) was significantly greater than in the control group ($0.62{\pm}0.21mm$). Dense collagen fibers inserting into the residual cementum on the transplanted root surfaces were observed in the test group. Slight ankylosis was observed in 2 of the 4 specimens in the test group on the mesiodistal sides where the root-planed surfaces faced the existing bone. Root resorption (RR) was detected in both the control and test groups. Conclusions: Within the limits of this study, it can be concluded that reciprocal autologous root transplantation was effective for bone regeneration in class III furcation defects in dogs. However, further studies are required to standardize the approach in order to prevent unwanted RR prior to clinical application.

• Journal of Plant Biotechnology
• /
• v.37 no.1
• /
• pp.12-24
• /
• 2010

Plant metabolomics is a research field for identifying all of the metabolites found in a certain plant cell, tissue, organ, or whole plant in a given time and conditions and for studying changes in metabolic profiling as time goes or conditions change. Metabolomics is one of the most recently developed omics for holistic approach to biology and is a kind of systems biology. Metabolomics or metabolite fingerprinting techniques usually involves collecting spectra of crude solvent extracts without purification and separation of pure compounds or not in standardized conditions. Therefore, that requires a high degree of reproducibility, which can be achieved by using a standardized method for sample preparation and data acquisition and analysis. In plant biology, metabolomics is applied for various research fields including rapid discrimination between plant species, cultivar and GM plants, metabolic evaluation of commercial food stocks and medicinal herbs, understanding various physiological, stress responses, and determination of gene functions. Recently, plant metabolomics is applied for characterization of gene function often in combination with transcriptomics by analyzing tagged mutants of the model plants of Arabidopsis and rice. The use of plant metabolomics combined by transcriptomics in functional genomics will be the challenge for the coming year. This review paper attempted to introduce current status and prospects of plant metabolomics research.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.2
• /
• pp.250-263
• /
• 2006

Statement of problem: Ti-alloy has been used widely since it was produced in the United States in 1947 because it has high biocompatibility and anticorrosive characteristics. Purpose: The pure titanium, however, was used limitedly due to insufficient mechanical charateristics and difficult manufacturing process. Our previous study was focused on the development of a new titanium alloy. In the previous study we found that the Ti-Ta-Nb alloy had better mechanical characteristics and similar anticorrosive characteristics to Ti-6Al-4V Material and methods: In this study, the cytotoxicity of the Ti-Ta-Nb alloy was evaluated by MTT assay using MSCs(Mesenchaimal stem cells) and L929 cells(fibroblast cell line). The biocompatibility of the Ti-Ta-Nb alloy was performed by inserting the alloy into the femur of the rabbits and observing the radiological and histological changes surrounding the alloy implant. Results: 1. In the cytotoxicity test using MSCs, the 60% survival rate was observed in pure titanium, 84% in Ti-6Al-4V alloy and 95% in Ti-10Ta-10Nb alloy. 2. In the animal study, the serial follow-up of the radiographs showed no separation or migration revealing gradual bone ingrowth surrounding the implants. Similar radiographic results were obtained among three implant groups pure titanium, Ti-6Al-4V alloy and Ti-10Ta-10Nb alloy. 3. In the histologic examination of the bone block containing the implants. the bone ingrowth was prominent around the implants with the lapse of time. There was no signs of any tissue rejection, degeneration, or inflammation. Active bone ingrowth was observed around the implants. In the comparison of the three groups, the rate of bone ingrowth was better in the Ti-10Ta-10Nb alloy group than those in pure titanium group or Ti-6Al-4V alloy group. In conclusion, Ti-10Ta-10Nb alloy revealed better biocompatibility in survival rate of the cells and bone ingrowth around the implants. Therefore we believe a newly developed Ti-10Ta-10Nb alloy can replace currently used Ti-6Al-4V alloy to increase biocompatibility and to decrease side effects. Conclusion: In conclusion, Ti-10Ta-10Nb alloy revealed better biocompatibility in survival rate of the cells and bone ingrowth around the implants. Therefore we believe a newly developed Ti-10Ta-10Nb alloy can replace currently used Ti-6Al-4V alloy to increase biocompatibility and to decrease side effects.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.347-354
• /
• 2007

A simple and rapid high-performance liquid chromatography assay for the determination of residual novobiocin levels in bovine, porcine, chicken, flatfish and japanese eel muscle has been developed and validated. The separation condition for HPLC/UV was optimized with phenyl hexyl ($4.6{\times}150mm$, $5{\mu}m$) column with 10 mM monobasic sodium phosphate buffer (pH 2.5)/acetonitrile (50/50, v/v) as the mobile phase at a flow rate of 1.0 mL/min and detection wavelength was set at 254 nm. Residues were extracted from tissue by blending with methanol and lipid materials were removed with n-hexane. Then, the methanol extract was evaporated to dryness under a nitrogen stream, reconstituted in the mobile phase. Aliquot of the organic extract was decanted and filtered through $0.45{\mu}m$ syringe filter. The $20{\mu}L$ of the resulting solution was injected into the HPLC system. The calibration ranges were $0.5{\sim}5{\mu}g/g$ and calibration curves were linear with coefficients of correlation better than 0.95. The limits of quantification were $0.5{\mu}g/g$ for all muscles. The recoveries of bovine, porcine, chicken, flatfish and japaneseel muscles were 99.8%, 102.4%, 91.0%, 104.0% and 93.0%, respectively. The procedures were validated according to the CODEX guideline, determining specificity, linearity, accuracy, precision, quantitation limit and recovery.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.21-28
• /
• 2006

Purpose: The purpose of this study is to find a optimal beam spoiler condition on the dose distribution near the surface, when treating a squamous cell carcinoma of the head and neck and a lymphatic region with 10 MV photon beam. The use of a optimal spoiler allows elivering high dose to a superficial tumor volume, while maintaining the skin-sparing effect in the area between the surface to the depth of 0.4 cm. Materials and Methods: The lucite beam spoiler, which were a tissue equivalent, were made and placed between the surface and the photon collimators of linear accelerator. The surface-dose, the dose at the depth of 0.4 cm, and the maximum dose at the dmax were measured with a parallel-plate ionization chamber for $5{\times}5cm\;to\;30{\times}30cm^2$ field sizes using lucite spoilers with different thicknesses at varying skin-to-spoiler separation (SSS). In the same condition, the dose was measured with bolus and compared with beam spoiler. Results: The spoiler increased the surface and build-up dose and shifted the depth of maximum dose toward the surface. With a 10 MV x-ray beam and a optimal beam spoiler when treating a patient, a similer build-up dose with a 6 MV photon beam could be achieved, while maintaining a certain amount of skin spring. But it was provided higher surface dose under SSS of less than 5 cm, the spoiler thickness of more than 1.8 cm or more, and larger field size than $20{\times}20cm^2$ provided higher surface dose like bolus and obliterated the spin-sparing effect. the effects of the beam spoiler on beam profile was reduced with increasing depths. Conclusion: The lucite spoiler allowed using of a 10 MV photon beam for the radiation treatment of head and neck caner by yielding secondary scattered electron on the surface. The dose at superficial depth was increased and the depth of maximum dose was moved to near the skin surface. Spoiling the 10 MV x-ray beam resulted in treatment plans that maintained dose homogeneity without the consequence of increased skin reaction or treat volume underdose for regions near the skin surface. In this, the optimal spoiler thickeness of 1.2 cm and 1.8 cm were found at SSS of 7 cm for $10{\times}10cm^2$ field. The surface doses were measured 60% and 64% respectively. In addition, It showed so optimal that 94% and 94% at the depth of 0.4 cm and dmax respectively.