• Journal of radiological science and technology
• /
• v.15 no.2
• /
• pp.11-15
• /
• 1992

For improving the image quality in case of neck Lateral projections, the Al compensation filter were used and conclusion that, it could be got the high image quality able to observe the shadow of cervical spine, hyoid bone, trachea, soft tissue simultaneously.

• Journal of The Korean Radiological Technologist Association
• /
• v.27 no.2
• /
• pp.66-85
• /
• 2001

In medical equipments as complex as a computed tomographic equipment, routine quality control procedures are essential to the detection of small pathologic change in soft tissue as well as and the maintenance of optimal image quality. This study was condu

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.237-243
• /
• 2007

Phantoms are very necessary for quality assurance of radio nuclides imaging systems to maintain standards and to ensure reproducibility of test. General quality assurance and instrument quality control are essential in every hospital. The human tissue equivalent materials are aluminum, areryl, water and epoxy..etc. It is very important to select optimum equivalant materials for a phantoms in QC. Especially, paraffin is very similar with human soft tissue in X or Gamma-ray physical characteristics and easy to buy with economically. We made a paraffin thyroid phantom and compare with thyroid areryl phantom, also used commercially in practice. Two small size cold spots(3 and 6 mm diameter) and a hot spot(3 mm diameter) embeded in paraffin phantom. And imaged with $^{99m}TcO_4$ by camera for analysis about spatial resolution and noise at the hot and cold spots. We got some results as below : 1. No difference in counting rate and noise between both arcryl and paraffin thyroid phantoms. 2. The best spatial resolution can be seen 6 cm distance between pinhole collimator and thyroid phantoms(arcryl and paraffin). 3. More optimal spatial resolution could acquired in paraffin thyroid phantom. Paraffin is very similar with human soft tissue in atomic number, density and relative absorbtion function, and can be shaped easily what we wanted. So we can recommendation paraffin as quality assurance phantom because its usefulness, economical benefit and purchasability.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.11a
• /
• pp.42.1-42.1
• /
• 2008

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.10a
• /
• pp.158-158
• /
• 2003

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.720-732
• /
• 2001

Skeletal muscle is of major economic importance since it is finally converted to meat for consumers. The increase in meat production with low costs of production may be achieved by optimizing muscle growth, whereas a high meat quality requires, among other factors, the optimization of intramuscular glycogen and fat stores. Thus, research in energy metabolism aims at controling muscle metabolism, but also liver and adipose tissue metabolism in order to optimize energy partitioning in favour of muscles. Liver is characterized by high anabolic and catabolic rates. Metabolic enzymes are regulated by nutrients through short-term regulation of their activities and long-term regulation of expression of their genes. Consequences of liver metabolic regulation on energy supply to muscles may affect protein deposition (and hence growth) as well as intramuscular energy stores. Adipose tissues are important body reserves of triglycerides, which result from the balance between lipogenesis and lipolysis. Both processes depend on the feeding level and on the nature of nutrients, which indirectly affect energy delivery to muscles. In muscles, the regulation of rate-limiting nutrient transporters, of metabolic enzyme activities and of ATP production, as well as the interactions between nutrients affect free energy availability for muscle growth and modify muscle metabolic characteristics which determine meat quality. The growth of tissues and organs, the number and the characteristics of muscle fibers depend, for a great part, on early events during the fetal life. They include variations in quantitative and qualitative nutrient supply to the fetus, and hence in maternal nutrition. During the postnatal life, muscle growth and characteristics are affected by the age and the genetic type of the animals, the feeding level and the diet composition. The latter determines the nature of available nutrients and the rate of nutrient delivery to tissues, thereby regulating metabolism. Physical activity at pasture also favours the orientation of muscle metabolism, towards the oxidative type. Consequently, breeding systems may be of a great importance during the postnatal life. Research is now directed towards the determination of individual tissue and organ energy requirements, a better knowledge of nutrient partitioning between and within organs and tissues. The discovery of new molecules (e. g. leptin), of new molecular mechanisms and of more powerful techniques (DNA chips) will help to achieve these objectives. The integration of the different levels of knowledge will finally allow scientists to formulate new types of diets adapted to sustain a production of high quality meat with lower costs of production.

• Imaging Science in Dentistry
• /
• v.48 no.2
• /
• pp.111-119
• /
• 2018

Purpose: This study was conducted to evaluate the accuracy of linear measurements of 3-dimensional (3D) images generated by cone-beam computed tomography (CBCT) and facial scanning systems, and to assess the effect of scanning parameters, such as CBCT exposure settings, on image quality. Materials and Methods: CBCT and facial scanning images of an anthropomorphic phantom showing 13 soft-tissue anatomical landmarks were used in the study. The distances between the anatomical landmarks on the phantom were measured to obtain a reference for evaluating the accuracy of the 3D facial soft-tissue images. The distances between the 3D image landmarks were measured using a 3D distance measurement tool. The effect of scanning parameters on CBCT image quality was evaluated by visually comparing images acquired under different exposure conditions, but at a constant threshold. Results: Comparison of the repeated direct phantom and image-based measurements revealed good reproducibility. There were no significant differences between the direct phantom and image-based measurements of the CBCT surface volume-rendered images. Five of the 15 measurements of the 3D facial scans were found to be significantly different from their corresponding direct phantom measurements(P<.05). The quality of the CBCT surface volume-rendered images acquired at a constant threshold varied across different exposure conditions. Conclusion: These results proved that existing 3D imaging techniques were satisfactorily accurate for clinical applications, and that optimizing the variables that affected image quality, such as the exposure parameters, was critical for image acquisition.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.6
• /
• pp.498-505
• /
• 2001

This study was conducted to investigate the characteristics of dough and bread prepared by a Korean pigmented rice(KPR). The fermentation of the dough was promoted with a lower pH. Though the springiness and gumminess of the dough were low, but It was more tender and moist than that of control. Color of the bread showed red wine and the acceptabi]ity of the bread was higher than control evaluated by sensory test. The tissue of the bread has more small particles of starch than that of control and It was densely populated. The distribution tendency of the starch particles in the tissue of the bread was the more apparent in the KPR. And big starch particles like lens were observed in the dough with 10% of KPR. Mouse feeling of the bread was more sticky but, it was little clogging.

• Archives of Plastic Surgery
• /
• v.45 no.2
• /
• pp.180-184
• /
• 2018

Breast deformity, in post-burn patients, is a common problem leading to lower self-esteem and reclusive behavior that impairs quality of life. The authors present the course of treatment of an 18-year-old immigrant girl who suffered second- to third-degree burns over approximately 20% of her total body surface area in her early childhood. The second- to third-degree burns were located on her right trunk and abdomen, as well as her right shoulder, neck, and right groin area. Since it was not offered in her home country, reconstructive surgery, including microsurgical breast reconstruction, was sought abroad. Due to the lack of available skin and soft tissue, a bilateral breast reconstruction with free transverse myocutaneous gracilis flaps was offered. This case illustrates one method of using microsurgery to address post-burn breast deformities in order to alleviate psychological suffering and improve quality of life.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.2
• /
• pp.233-243
• /
• 1999

Food safety or sanitation are terms broadly applicable to procedures designed to ensure that food quality is high and free of factors which may adversely affect human health. These factors include zoonotic diseases and acute and chronic effects of ingesting natural and human-made xenobiotics. Use of drugs in animal production for the treatment and control of animal diseases, to promote growth rate, and to improve feed conversion efficiency has expanded year by year, thus increasing the possibilities for occurrences in animal products of residues harmful to humans. Governmental agencies have made efforts to control or prevent residue problems. The Korean Food and Drug Administration (KFDA) is charged with the responsibility of establishing tolerances for veterinary drugs, pesticides, and mycotoxins and other non-pharmaceutical substances. The Department of Veterinary Service is responsible for establishing guidelines regarding withdrawal times of drugs, approval of drugs, their uses, and sanitation enforcement of livestock products. The authors describe the toxicological basis for the establishment of tolerance levels for xenobiotics and the pharmacokinetic basis for establishing withdrawal time for veterinary drugs. The regulatory tolerance levels of chemicals in pork and swine feed, Korean regulations on the use of feed additives, rapid residue test methods, the National Residue Program, and the Food Animal Residue Avoidance Databank are discussed. Rapid EIA methods that are under development for the screening of live animals are described These methods predict tissue residues from an examination of blood samples taken from pigs before they are slaughtered.