• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.356-360
• /
• 2015

In this paper, we design and implement a mobile robot with variable structure for tip-over prevention. The mobile robot is designed for the purpose of stable drive and work in outdoor terrain. The outdoor terrain is rough and uneven. In this terrain, the tip-over of the mobile robot can occur while driving and working. Therefore, the structure of the mobile robot must be designed in consideration of stable drive and work. The proposed structure is defined as an X-shape for overall balance of the mobile robot. The shape is designed by using a multi-level structure for reducing the size of the robot. To verify the effectiveness of the proposed design, we analyze the tip-over characteristics according to the height of gravitational center and the extension length of the robot. Finally, we develop a prototype of the mobile robot with variable structure, taking the results of the tip-over analysis into consideration.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.537-550
• /
• 2014

The actual burden of head and neck cancer in India is much greater than reflected through the existing literature and hence can be regarded as a 'tip of iceberg' situation. This has further been evident by the recent reports of 'Net-based Atlas of Cancer in India'. South-east Asia is likely to face sharp increases of over 75% in the number of cancer deaths in 2020 as compared to 2000. Since the percentage increase of Indian population has been nearly twice that of the world in last 15 years there is a likelihood of increase in cancer burden with the same proportion. The distribution of population based cancer registries is grossly uneven with certain important parts of the country being not represented at all and hence the current cancer burden is not reflected by registry data. However, the pathetic situation of health care system in major parts of the country as also emphasized by the World Bank, is not suitable to provide anywhere near accurate data on cancer burden. Head and neck cancer (including thyroid lesions) is third most common malignancy seen in both the sexes across the globe but is the commonest malignancy encountered in Indian males. Also oral cavity cancer is the most prevalent type amongst the males and one of the highest across the globe. This article reviews the latest global and national situation with an especial emphasis on head and neck cancer. Furthermore this review focuses on burden in different sub sites at national and global levels.

• The Korean Journal of Pain
• /
• v.14 no.2
• /
• pp.234-238
• /
• 2001

Percutaneous laser discectomy has potential advantages over conservative therapy and classical open surgery as a minimally invasive procedure, although clinical experiences are limited. We experienced a patient treated with herniated lumbar discs using Nd：YAG laser. A 55-year-old woman complained of severe back pain with sciatica on L4/5 and L5/S1 dermatome for several months. The MRI finding showed bulging discs at L4/5 and L5/S1. Epidural, transsacral and root block treatments were attempted without effect. Under fluoroscopic guidance, a 14 G biopsy needle was inserted into the L4/5 and L5/S1 disc spaces to the margin of the nucleus pulposus. Laser irradiation for vaporization of tissue was performed at 20 W/second to 1200 J. A laser fiber ($600{\mu}m$) was advanced 1 cm from the tip of the needle. At the end of the procedure, the patient began to feel relief of pain (VAS changed from 9 to 4) and was discharged the same day after staying 2 hours in the recovery room. Antibiotics were administered for prevention of discitis. She had no complaints of pain until the 1-month follow up visit. Percutaneous laser discetomy technique has the disadvantages of expensive equipment, high temperature and amount of vaporing disc tissue is empirical. However, this technique, as one of the therapeutic modalities for disc herniation, provides faster relief from acute attack than conservative management techniques in carefully selected patients with sciatica due to disc prolapse.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.432-461
• /
• 1995

The basic principles in the design of Class II amalgam cavity preparations have been modified but not changed in essence over the last 90 years. The early essential principle was "extension for prevention". Most of the modifications have served to reduce the extent of preparation and, thus, increase the conservation of sound tooth structure. A more recent concept relating to conservative Class II cavity preparations involves elimination of occlusal preparation if no carious lesion exists in this area. To evaluate the ideal ClassII cavity preparation design, if carious lesion exists only in the interproximal area, three cavity design conditions were studied: Rodda's conventional cavity, simple proximal box cavity and proximal box cavity with retention grooves. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method. Linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B option, Gap option and R option model) were developed. B option model was assumed perfect bonding between the restoration and cavty wall. Gap option model(Gap distance: $2{\mu}m$) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). R option model was assumed non-connection between the restoration and cavty wall. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as followed. 1. Rodda's cavity form model showed greater amount of displacement with other two models. 2. The stress and strain were increased on the distal marginal ridge and buccopulpal line angle in Rodda's cavity form model. 3. The stress and strain were increased on the central groove and a part of distal marginal ridge in simple proximal box model and proximal box model with retention grooves. 4. With Gap option, Rodda's cavity form model showed the greatest amount of the stress on distal marginal ridge followed by proximal box model with retention grooves and simple proximal box model in descending order. 5. With Gap option, simple proximal box model showed greater amount of stress on the central groove with proximal box model with retention grooves. 6. Retention grooves in the proximal box played the role of supporting the restorations opposing to loads.