• Archives of Reconstructive Microsurgery
• /
• 제18권1호
• /
• pp.35-39
• /
• 2009

Purpose: Various techniques have been attempted for design of the flaps. However, there are some disadvantages. They have thin, pliable, and two dimensional methods. The aim of this study is to report usefulness of polyurethane foam dressing materials for three dimensional design of the digital island flap. Methods: From June of 2007 to september of 2008, 10 patients received digital island flap surgery for soft tissue defect of the finger. After minimal debridement of the wound, size and shape of the defect were measured using polyurethane foam. We used Medifoam-$5^{(R)}$ And then, designed this inset the wound. The flap was designed on the donor site with a arterial pedicle as the central axis according to size and shape. A full thickness skin graft from the groin is applied on the flap donor defect and secured with a tieover bolster dressing. Results: Reviewing sizes of the flaps, the length and width of flaps ranged from 1.5 to 3.3 cm and 1.0 to 2.5 cm. The PACS(Picture Archiving Communication System) program allows identification of the donor depth of finger. The distance for the soft tissue ranged from 4.3 mm to 6.7 mm. Mean depth of donor site was 5.3${\pm}$0.6 mm. Also, the thickness of Medifoam-$5^{(R)}$ ranged nearly 5 mm. On flap insetting, full-thickness skin graft was necessary. We did not experience any problems in the recipient site size either, regardless of the extended flaps. Conclusion: Polyurethane foam has many advantages over the more conventional templates. Refinements in flap design and surgical technique resulted in favorable functional and cosmetic results. Especially, for beginner, Polyurethane foam dressing material is a simple and safe tool and therefore is an excellent choice for design of the island flap.

• 대한두개안면성형외과학회지
• /
• 제22권2호
• /
• pp.85-92
• /
• 2021

Background: Patients with secondary deformities associated with unilateral cleft lip and nose might also suffer from nostril stenosis due to a lack of tissue volume in the nostril on the cleft side. Here, we used full-thickness skin grafts (FTSGs) to reduce nostril stenosis and various methods for skin volume augmentation. We compared the changes in the symmetry of both nostrils before and after surgery. Methods: From February 2016 to January 2020, 34 patients underwent secondary cheiloplasty and open rhinoplasty for secondary deformities of the unilateral cleft lip and nose with nostril stenosis. FTSG was used on the nostril floor, nasal columella, and alar inner lining. The measured nasal profile included the nostril surface, nostril circumference, width of the nostril floor, and distance from the alar-facial groove to the nasal tip. The "overlap area," which was defined as the largest overlapping area when the image of the cleft nostril was flipped to the left and right and overlaid on the image of the normal side nostril, was also calculated. The degree of symmetry was evaluated by dividing the value of the cleft side by that of the normal side of each measured profile and expressed as "ratios." Results: The results of all profile ratios, except for the nostril floor width, became significantly close to 1, which represents full symmetry. The overlap area ratio improved from 62.7% to 77.3%, meaning that the length and width of the nostril as well as the overall shape became similar (p< 0.05). Conclusion: When performing cleft rhinoplasty with nostril stenosis, FTSG is useful to achieve symmetry in the nostril size and shape. Skin grafting is simpler to perform than the other types of local flap, and the results are generally satisfactory.

• 대한치과보철학회지
• /
• 제52권4호
• /
• pp.279-286
• /
• 2014

목적: 임플란트가 식립되는 동적과정을 유한요소해석으로 모사하여, 임플란트 나사형상 차이가 변연골의 식립 응력발생에 미치는 영향을 조사하고자 한다. 재료 및 방법: 코어직경 3.5 mm, 매식부 길이 10 mm인 Straumann 임플란트 몸체 외형에 서로 다른 4종의 나사산이 부여된 가상의 임플란트 모델 4개를 CAD 프로그램을 이용하여 각각 제작하였다. 4종 나사산은 buttress 형, v-자 형, reverse buttress 형, square 형이며, 나사산의 높이와 피치는 0.3 mm와 1.0 mm로 모두 동일하다. 각 임플란트가 3.8 mm pilot hole을 갖는, 1.2 mm 두께 치밀골에 식립되는 과정을 $DEFORM^{TM}$ 3D (ver. 6, SFTC, Columbus, OH, USA) 프로그램을 사용하여 모사/해석하였으며, 식립이 진행되는 과정에 인접골에 생성/누적되는 응력(식립응력)을 비교 분석하였다. 결과: 임플란트 식립 초기, 그 하단부가 pilot hole 내로 진입하며 나사산이 골벽을 압박/변형시키는 단계에서 식립 토오크와 응력이 급격히 발생하였으며 그 이후에 토오크와 응력이 모두 감소하는 변화를 보였다. 식립 응력은 임플란트 나사산 형상에 따라 현저한 차이가 있었으며, v-자형 나사산 경우가 가장 낮았고, square 형의 경우가 가장 높았다. 나사산 차이가 인접골 응력에 미치는 영향은 나사산 첨부 보다는 기저부에 인접한 위치에서 더 현저하였다. 결론: 임플란트 식립응력을 낮추어 골융합에 유리한 환경을 조성하는데는 나사산 첨부가 상대적으로 날카로운 v-자형 나사산이 유리하다.

• 한국유체기계학회 논문집
• /
• 제11권5호
• /
• pp.15-21
• /
• 2008

In modem wind power system of large capacity above 1MW, horizontal axis wind turbine(HAWT) is a common type. And, the optimum design of wind turbine to guarantee excellent power performance and its reliability in structure and longevity is a key technology in wind Industry. In this study, mathematical expressions based upon the conventional BEMT(blade element momentum theory) applying to basic 1MW wind turbine blade configuration design. Power coefficient and related flow parameters, such as Prandtl's tip loss coefficient, tangential and axial flow induction factors of the wind turbine analyzed systematically. X-FOIL was used to acquire lift and drag coefficients of the 2-D airfoils and we use Viterna-Corrigan formula to interpolate the aerodynamic characteristics in post-stall region. In order to predict the performance characteristics of the blade, a performance analysis carried out by BEMT method. As a results, axial and tangential flow factors, angle of attack, power coefficient investigated in this study.

• Structural Engineering and Mechanics
• /
• 제16권5호
• /
• pp.519-531
• /
• 2003

Piezoelectric actuators have long been recognised for use in aerospace structures for control of structural shape. This paper looks at active control of the swept shock wave/turbulent boundary layer interaction using smart flap actuators. The actuators are manufactured by bonding piezoelectric material to an inert substrate to control the bleed/suction rate through a plenum chamber. The cavity provides communication of signals across the shock, allowing rapid thickening of the boundary layer approaching the shock, which splits into a series of weaker shocks forming a lambda shock foot, reducing wave drag. Active control allows optimum control of the interaction, as it would be capable of positioning the control region around the original shock position and unimorph tip deflection, hence mass transfer rates. The actuators are modelled using classical composite material mechanics theory, as well as a finite element-modelling program (ANSYS 5.7).

• 한국분무공학회지
• /
• 제20권2호
• /
• pp.114-120
• /
• 2015

Effects of injection conditions on a pintle injector which is proper to recent liquid rocket engines requiring low cost, low weight, high efficiency and reusability were studied. The pintle injector with a typical moving pintle was used for atmospheric experiment using water and air. Injection pressures of water were considered 0.5 and 1.0 bar, 0.1 to 1.0 bar for injection pressures of air and 0.2 to 1.0 mm for pintle opening distance. Sauter mean diameters (SMD) of spray was measured at 50 mm distance from a pintle tip and SMD was treated as a representative parameter in this study. As a result, because of shape characteristics of the pintle injector, there was a transient region between the pintle opening distances of 0.6 and 0.7 mm and this region affected to mass flow rates and SMDs. Also, Reynolds numbers for gas, Weber numbers and momentum ratios were adopted as major non-dimensional paramters and the momentum ratio has strong correlation with SMD.

• 대한의용생체공학회:의공학회지
• /
• 제25권3호
• /
• pp.207-215
• /
• 2004

본 연구에서는 유전 프로그램을 이용하여 6가지 형태의 금속 와이어 배치를 가진 전극을 생성하여 각 전극이 3차원 형태의 달팽이관에 미치는 기계적인 영향과 그 거동을 유한요소법을 이용하여 분석하였다. 그리고 전극이 삽입되는 달팽이관은 helico-spiral 근사방법에 의해 결정된 식을 이용하였으며, 고실계단(scala tympani)의 형태는 실제 고실계단 단면의 영상정보를 추출하여 얻어내었다. 해석결과 금속 와이어가 평행하게 배치될 경우 가장 큰 힘을 달팽이관 외벽에 전달하며, 삽입에도 가장 큰 힘이 필요한 것을 알 수 있었다. 그리고 달팽이관은 3차원 구조이므로 전극이 삽입되면서 삽입 전에 자극 사이트가 바라보도록 설정한 방향보다 조금 돌아감을 확인하였다. 이 연구의 결과로부터 전극의 강성이 외상(trauma)을 줄이는데 중요하다는 것을 알 수 있다.

• 한국유체기계학회 논문집
• /
• 제3권2호
• /
• pp.31-35
• /
• 2000

In this research, the performance predictions of the submersible mixer were investigated. The variation of the performance characteristics by changing the impeller design parameters were discussed through the flow calculation results by using a commercial program, FLUENT. The performance of the submersible mixers is related to the velocity diffusion profiles downstream of the impeller and also the required input motor power to mix the fluid. In this study, the various design parameters such as the number of blade, the hub and tip diameters, the impeller blade profiles and revolution speed of the blades were taken for the fixed values. The blade sweep direction, the chord length distribution along with the radius of the blade and the inlet blade angle were changed to make different testing models. The flow calculation results show the effect of the changed design parameters on the performance of the submersible mixers and also give some helpful information for designing more efficient submersible mixers.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.136-142
• /
• 2004

Effects of Nb(Niobium) contents and solution annealing on the strength and fatigue lift of 18%Ni maraging steel commonly using in aircraft, space field, nuclear energy, and vehicle etc. were investigated. Also the fatigue life stress intensity factor were compared experiment result and FEA(finite element analysis) result. The more Nb content, the higher or the lower fatigue lift on base metal specimens or solution annealed specimens showing that the fatigue life was almost the same. The maximum stresses of X, Y, and Z axis direction showed about 2.12${\times}$10$^2$MPa, 4.40${\times}$10$^2$MPa and 1.32${\times}$10$^2$MPa respectively. The Y direction stress showed the highest because of the same direction as the loading direction. The fatigue lives showed about 7% lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about 3.5∼10% than that of the experiment result showing that the longer fatigue crack length, the higher error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

• Applied Microscopy
• /
• 제48권1호
• /
• pp.11-16
• /
• 2018

For Odontamblyopus lacepedii with small and turbid eyes, the gross structure and histology of the olfactory organ, which is important for its survival and protection of the receptor neuron in estuarial environment and its ecological habit, was investigated using a stereo, light and scanning electron microscopes. Externally, the paired olfactory organs with two nostrils are located identically on each side of the snout. These nostrils are positioned at the anterior tip of the upper lip (anterior nostril) and just below eyes covered with the epidermis (posterior nostril). Internally, this is built of an elongated olfactory chamber and two accessory nasal sacs. In histology, the olfactory chamber is elliptical in shape, and lined by the sensory epithelium and the non-sensory epithelium. The sensory epithelium of a pseudostratified layer consists of olfactory receptor neurons, supporting cells, basal cells and lymphatic cells. The non-sensory epithelium of a stratified layer has swollen stratified epithelial cells and mucous cells with acidic and neutral sulfomucin. From these results, we confirmed the olfactory organ of O. lacepedii is adapted to its ecological habit as well as its habitat with burrows at the muddy field with standing and murky waters.