• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.631-638
• /
• 2003

The wind turbine blade is the equipment converted wind into electric energy. The effect of the blade has influence of the output power and efficiency of wind turbine. The design of blade is considered of lift-to-drag ratio, structure, a condition of process of manufacture and stable maximum lift coefficient, etc. This study is used the simplified method for design of the aerodynamic blade and aerodynamic analysis used blade element method. This process is programed by delphi-language. The program has any input values such as tip speed ratio, blade length, hub length, a section of shape and max lift-to-drag ratio. The program displays chord length and twist angle by input value and analyzes performance of the blade.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.1
• /
• pp.39-49
• /
• 2010

In this paper, a numerical study has been carried out to investigate the influence of jet fan design variables on the performance of a jet fan. In order to achieve an optimum jet fan design and to explain the interactions between the different geometric configurations in the jet fan, three-dimensional computational fluid dynamics and the DOE method have been applied. Several geometric variables, i.e., hub-tip ratio, meridional shape, rotor stagger angle, number of rotor-stator blades and stator geometry, were employed to improve the performance of the jet fan. The objective functions are defined as the exit velocity and total efficiency at the operating condition. Based on the results of computational analyses, the performance of the jet fan was significantly improved. The performance degradations when the jet fan is operated in the reverse direction are also discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.355-362
• /
• 2020

EFP composed of explosive, charge and liner generally penetrates standoff a target by Monroe effect. Its performance highly depends on penetrator characteristics and flight stability. Penetration ability can be dramatically reduced when the penetrator reaches the target with AOA, even if the penetrator has high kinetic energy and L/D ratio. Therefore, it is important to research not only penetrator characteristics and but also flight stability. In this work, the effect of liner shape on penetrator characteristics was examined using free flight test and numerical tools. It was found that tip velocity of penetrator was increased with decreasing liner thickness. It was also found that thicker liner had higher static margin leading to better flight status.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.313-316
• /
• 1997

The effects of aromatic curing agent of MDA contents and post curing conditions on dielectric deterioration characteristics of DGEBA/MDA/SN system were investigated. The dielectric properties were measured by using needle-plane electrode geometry under the commercial AC high electric field application. As the curing agent content increased, the dielectric breakdown strength increased and then decreased slightly. All the trees initiated from the tip of needle electrode and the shape of the tree in this system was a dendrite type.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.25-31
• /
• 2004

Two-dimensional laser visualization methods have been used in the study of breakup and atomization processes of non-evaporating diesel sprays. A single-hole spray injected into a quiescent atmospheric environment was visualized by the LIF(Laser Induced Fluorescence) and scattering technique. The LIF technique could be implemented to take the images which are magnified enough to show the shape of liquid ligaments and small droplets. The spontaneous scattering and fluorescent images of sprays were also taken to investigate the atomization of droplets. In the tip and periphery of a spray. the scattering light is bright and the ratio of fluorescent/scattering intensity is lower. This characteristics indicate the very high number density of small droplets which are well atomized.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.2
• /
• pp.56-58
• /
• 2002

An autotetraploid, Sawonppong 28 was derived from a thick-leaf and highly productive mulberry variety, Huyeoprok, by colchicine solution treatment on growing point and its characteristics were as follows. The number of somatic chromosomes of the derived variety was 2n=56 of an autotetraploid and green tip sprouting stage was medium budding variety with triangular oval shape and thick leaves contained rich chlorophyll. The length of branches was comparatively short and the number of branches was also small. However the branches were thick and non-budding length percentage at basal part of branch was high and cold hardiness was weak.

• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.336-344
• /
• 2018

Four new species of the genus Alloclubionoides collected from mountain litter and hillock litter around the agricultural ecosystem of Korea are described in the present work with appropriate body measurements and morphological illustrations; A. hwaseongensis sp. nov., A. imi sp. nov., A. namhansanensis sp. nov. and A. nasuta sp. nov. Females of A. hwaseongensis sp. nov., A. namhansanensis sp. nov. and A. nasuta sp. nov. can be distinguished based on the epigyne shape and structure of internal genitalia from previously described species. Males of A. imi sp. nov. can also be distinguished based on the shapes of retrolateral tibial apophysis, embolus tip and conductor from previously described species. Also, a key to the Korean Alloclubionoides spiders is provided. Alloclubionoides gajiensis Seo, 2014 is newly synonymized with Alloclubionoides cochlea (Kim et al. 2007).

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.590-603
• /
• 2021

Benthic harpacticoids were collected from the East Sea of Korea. Specimen were identified as members of the genus Robertgurneya Apostolov & Marinov, 1988 based on the following characteristics: the fourth segment of antennule with aesthetasc, antenna with three-segmented exopod, shape of mandible, and P1-P4 armature formula. Robertgurneya donghaensis sp. nov. is morphologically most closely related to R. simulans (Norman & Scott T., 1905) and R. similis similis (Scott A., 1896). However, R. donghaensis is characterized by the rostrum with a pointed tip, caudal rami about as board as the length of its inner edge, the first segment of the P1 endopod much longer than entire exopod, and the P5 exopod with five setae in male. The genus Robertgurneya is reported from Korean waters for the first time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.5
• /
• pp.337-343
• /
• 2014

This paper presents a continuum-based shape design sensitivity analysis(DSA) method for crack propagation problems using a reproducing kernel method(RKM), which facilitates the remeshing problem required for finite element analysis(FEA) and provides the higher order shape functions by increasing the continuity of the kernel functions. A linear elasticity is considered to obtain the required stress field around the crack tip for the evaluation of J-integral. The sensitivity of displacement field and stress intensity factor(SIF) with respect to shape design variables are derived using a material derivative approach. For efficient computation of design sensitivity, an adjoint variable method is employed tather than the direct differentiation method. Through numerical examples, The mesh-free and the DSA methods show excellent agreement with finite difference results. The DSA results are further extended to a shape optimization of crack propagation problems to control the propagation path.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.120-126
• /
• 2009

Purpose: Autogenous cartilage is generally first choice in rhinoplasty because of its biocompatibility and resistance to infection. On the other hand, allogeneous cartilage graft might preferred over an autogenous graft to avoid additional donor site scars, morbidity and lengthened operating time. Allogenous costal cartilage ($Tutoplast^{(R)}$) not only have the advantage of averting donor site morbidity but also are resistant to infection, resembling autogenous cartilage graft. We report here a technique for rhinoplasty by using allogenous costal cartilage graft. Methods: Through open rhinoplastic approach, alar cartilage is released from upper lateral cartilage and relocated caudally. After relocation of alar cartilage, allogenous costal cartilage is immobilized by nonabsorbable suture material at caudal aspect of septal cartilage. Caudal end of allogenous costal cartilage is sutured between medial crura of alar cartilage. Tip projection is improved by using interdormal suture, transdormal suture and shield-shape cartilage graft which is harvested from concha Results: No significant resorption and infection was detected in any of patients. Aesthetic and functional results were satisfactory. Conclusion: The low incidence of major complication and versatility of allogeneous costal cartilage graft make safe and reliable source of cartilage graft in rhinoplasty.