• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.371-378
• /
• 2012

This paper presents a timing recovery method using Gardner TED (Timing Error Detector) with a Peak Detector using Parabola Peak Interpolation in underwater acoustic communication. This method will have an eye to improve phase converge speed of timing recovery and reduced amount of Tx data. The OQPSK(Offset Quadrature Phase Shift Keying) modulation technique was considered. The proposed algorithm has faster recovery speed and more accurate than Gardner TED because the sampling values in the proposed algorithm are moved persistingly to maximum or minimum point using parabolic peak interpolation. when simulation performed using Preposed method, it improved BER (Bit Error Rate) performance about 23% And to evaluate the performances of the proposed algorithm the sea trial was performed in the Korean East Sea. And distance of a transmitter-receiver is 3 km each other. As a result, the proposed algorithm outperforms better BER performance about 20% of timing recovery than the Gardner method. Also Proposed method improved converge speed of timing recovery about 1.4 times better than Gardner method.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.307-311
• /
• 2010

Most wireless ad hoc networks use sender-centric carrier sensing where a data sender determines the transmission timing through channel assessment. However, sender-centric carrier sensing suffers from both exposed and hidden terminal problems even with physical and virtual carrier sensing. In this paper, we propose a new receiver-centric carrier sense (RCS) technique where a data receiver triggers packet transmission based on local channel assessment. Through both numerical analysis and simulation studies, we show that the proposed RCS achieves up to 20.9% higher throughput than previous receiver-centric approaches.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.3
• /
• pp.257-268
• /
• 2024

The Korea Augmentation Satellite System (KASS) satellite was successfully launched and service is being started. By receiving messages transmitted from the KASS satellite, users can employ the messages to improve positioning accuracy or to verify the integrity of Global Positioning System (GPS). In this paper, we propose a test method for a beam-formed GPS receiver developed to improve the survivability of KASS augmented messages that can enhance positioning accuracy even in an environment with jamming or interfering signals. Through the test method proposed in this paper, quantitative verification is performed for a beam-formed GPS receiver aimed at maintaining the augmented navigation solution to which KASS augmented messages are applied by tracking the KASS signal as much as possible under conditions where the jamming signal strength is gradually increasing. In addition, the proposed test method includes three conditions; first, a static lab test method for repeated verification of functions under the same conditions; second, a static outdoor test method for performance verification in an operating environment of a platform equipped with the beam-formed GPS receiver; and finally, a dynamic lab test method for performance verification of a moving platform equipped with the beam-formed GPS receiver toward a jammer. In this paper, we propose a method for simulating the jamming signal incident direction through the phase delay of an RF cable designed to prevent unintentional jamming signal emission in both lab and outdoor tests, and a method of applying test software for injecting a jamming signal to compare the survivability performance consistently according to the presence or absence of beamforming signal processing. Through the proposed test method, it was verified that the augmented navigation solution could be output for a longer time period when the beamforming signal processing was applied to the KASS satellite signal in the beam-formed GPS receiver.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.911-920
• /
• 2010

This paper presents a method of designing hybrid analog/asymmetrical square-root (SR) FIR filters. In addition to the conventional frequency domain constraints, the proposed method considers time-domain constraints as well, including the inter-symbol interference (ISI) and the opening of the eye pattern at the receiver output. This paper also reviews a systematic way to find the discrete-time equivalence of analog parts in a band-limited digital communication system. Thus, a phase equalizer can be easily realized to compensate for the nonlinear phase responses of the analog components. With the hybrid analog/SR FIR filter co-design, examples show that using the proposed method can result in a more robust ISI performance in the presence of the receiver clock jitter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1219-1225
• /
• 2001

In this Paper we describe the design of synchronization algorithms for burst QPSK receiver, which are applicable to BWLL uplink. The demodulator consists of digital down converter, matched filter and synchronization circuits. For symbol timing recovery we ufo Gardner algorithm. And we use forth power method and decision directed method for carrier frequency recovery and phase recovery, respectively. For the sake of performance analysis, we compare simulation results with the board implemented by FPGA which is APEX20KE series chip for Alter. The performance results show it works quite well up to the condition that a frequency offset equal to 4.7% of symbol rate.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.35-41
• /
• 2015

Multilateration(MLAT) is commonly used in civil and military surveillance applications to accurately locate an aircraft, vehicle or stationary emitter. MLAT calculates the TDOA of signals by transmitted aircraft and determines the aircraft's location. With more than four receivers it is possible to estimate the 3D position of the aircraft by calculating the intersection of the resulting hyperbolas and the system integrity. In this study, our objectives are to apply MLAT technique to Jeju terminal control area and to propose a MLAT receiver network to properly estimate the positions of aircraft approaching this area. Based on computer simulations, we determine locations of ground receivers in Jeju terminal control area, calculate estimated position errors of the aircraft with respect to the selected receiver networks, and find the best receiver network with the least position error.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2013

A signal system for improving the code acquisition complexity of Global Navigation Satellite System (GNSS) receiver is proposed and the receiving correlator scheme is presented accordingly. The proposed signal system is a hierarchical code type with a duplexing configuration which consists of the Zadoff-Chu (ZC) code having a good auto-correlation characteristic and the Pseudo Random Noise (PRN) code for distinguishing satellites. The receiving correlator has the scheme that consists of the primary correlator for the ZC code and the secondary correlator which uses the PRN code for the primary correlation results. The simulation results of code acquisition using the receiving correlator of the proposed signal system show that the proposed signal scheme improves the complexity of GNSS receiver and has the code acquisition performance comparable to the existing GNSS signal system using Coarse/Acquisition (C/A) code.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• Journal of Positioning, Navigation, and Timing
• /
• v.1 no.1
• /
• pp.7-14
• /
• 2012

Due to inaccurate safe navigation estimates, maritime accidents have been occurring consistently. In order to solve this, the precise positioning technology using carrier phase information is used, but due to high buildings near inland waterways or inclination, satellite signals might become weak or blocked for some time. Under this weak signal environment for some time, the GPS raw measurements become less accurate so that it is difficult to search and maintain the integer ambiguity of carrier phase. In this paper, a method to generate code and carrier phase measurements under this environment and maintain resilient navigation is proposed. In the weak signal environment, the position of the receiver is estimated using an inertial sensor, and with this information, the distance between the satellite and the receiver is calculated to generate code measurements using IGS product and model. And, the carrier phase measurements are generated based on the statistics for generating fractional phase. In order to verify the performance of the proposed method, the proposed method was compared for a fixed blocked time. It was confirmed that in case of a weak or blocked satellite signals for 1 to 5 minutes, the proposed method showed more improved results than the inertial navigation only, maintaining stable positioning accuracy within 1 m.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.183-192
• /
• 2019

In fingerprint-based wireless positioning, it is necessary to establish a DB of the unmeasured area. To this end, a method of estimating the position of a base station based on a signal propagation model, and a method of estimating the information of the received signal in the unmeasured area based on the estimated position of the base station have been investigating. The purpose of this paper is to estimate the position of the base station using the measured information and to analyze the performance of the positioning. Vehicles equipped with a GPS receiver and signal measuring equipment travel the service area and acquire location-based Reference Signal Received Power (RSRP) measurements. We propose a method of estimating the position of the base station using the measured information. And the performance of the proposed method is analyzed on a simulation basis. The simulation results confirm that the accuracy of the positioning is affected by the measured area and the Dilution of Precision (DOP), the accuracy of the position information obtained by the GPS receiver, and the errors of the signal included in the RSRP. Based on the results of this paper, we can expect that the position of the base station can be estimated and the DB of the unmeasured area can be constructed based on the estimated position of the base stations and the signal propagation model.